Cooper Lighting Bollard Series Bedienungsanleitung

BOLLARD SERIES

PATHWAY LUMINAIRES

louvered series—design features

BSL

square louvered series

BRL

ROund dome top

louvered series

louvered series—design features

Top

Rugged, minimum 5/32" thick cast aluminum top

cap secured via a concealed stainless steel allen

screw with twist removal mechanism for lamp

access. Flow through ventilation assures cool to the

touch top.

louvers

Cast luminum Louver blades provide sharp cutoff

providing no direct light above 90°. Louvers are

secured to the shaft via tamper resistant stainless

steel rods and fasteners.

lamp enclosure

Lamp enclosure is one-piece tempered glass with

internal flutes for even disbursement of illumination.

Decorative colored glass optional. Globe is fully

gasketed via EPDM material. Socket is porcelain,

medium-base for HID lamp sources.

lower housing

Nominal 1/8" thick extruded aluminum housing.

Bollard housing is secured to the base with flathead,

counter-sunk screws for smooth, uncluttered

appearance.

Electrical

High Power Factor ballast for –20°F starting.

Product is factory mounted to the base. Quick

disconnects provided between lamp and electrical

assembly. Metal Halide and High Pressure Sodium

lamp sources up to 100W Metal Halide or High

Pressure Sodium coated lamps.

finish

Premium fade and abrasion resistant, TGIC

Polyester Powder Coat Finish. Standard colors are

Bronze, rchitectural White, Grey and Black. Other

architectural finish colors available including all

R L matches.

Base

Rugged cast aluminum. Completely concealed.

Mounting

Base mounts onto foundation with three (3) 1/2" x

12" anchor bolts on a 5" Dia. bolt circle (a centrally

located 2 7/8" x 3 1/2" wire entrance opening

provided).

louvered series—design features

BSL

square louvered series

BRL

ROund dome top

louvered series

louvered series—design features

Top

Rugged, minimum 5/32" thick cast aluminum top

cap secured via a concealed stainless steel allen

screw with twist removal mechanism for lamp

access. Flow through ventilation assures cool to the

touch top.

louvers

Cast luminum Louver blades provide sharp cutoff

providing no direct light above 90°. Louvers are

secured to the shaft via tamper resistant stainless

steel rods and fasteners.

lamp enclosure

Lamp enclosure is one-piece tempered glass with

internal flutes for even disbursement of illumination.

Decorative colored glass optional. Globe is fully

gasketed via EPDM material. Socket is porcelain,

medium-base for HID lamp sources.

lower housing

Nominal 1/8" thick extruded aluminum housing.

Bollard housing is secured to the base with flathead,

counter-sunk screws for smooth, uncluttered

appearance.

Electrical

High Power Factor ballast for –20°F starting.

Product is factory mounted to the base. Quick

disconnects provided between lamp and electrical

assembly. Metal Halide and High Pressure Sodium

lamp sources up to 100W Metal Halide or High

Pressure Sodium coated lamps.

finish

Premium fade and abrasion resistant, TGIC

Polyester Powder Coat Finish. Standard colors are

Bronze, rchitectural White, Grey and Black. Other

architectural finish colors available including all

R L matches.

Base

Rugged cast aluminum. Completely concealed.

Mounting

Base mounts onto foundation with three (3) 1/2" x

12" anchor bolts on a 5" Dia. bolt circle (a centrally

located 2 7/8" x 3 1/2" wire entrance opening

provided).

Standard series—design features Standard series—design features

Top

Rugged, cast aluminum. Provides rapid heat dissipation.

Encloses the upper reflector so it is hidden from view.

Tamper-proof screws provide easy access to lamp

compartment.

Housing

Consists of a heavy-duty, seamless extruded aluminum

tube. ifts off base for easy access to ballast.

Optics

ower dispersing reflector, in conjunction with a truncated,

octagonal upper collecting reflector, provides low-glare,

highly efficient illumination with optimum uniformity.

EXAMPLE: Using 70W HPS lamps with Bollard Series

luminaires mounted on 20' centers produce a symmetric

light pattern with a max. to min. uniformity ratio of less

that 4:1.

Lens

1/4" wall, impact-resistant clear acrylic. Polycarbonate

lens is optional.

Prismatic refractor

All Bollard Series luminaires are available with an

optional prismatic borosilicate glass refractor to provide

efficient, low-glare light distribution.

Gasketing

Bollards are designed to form a single, integral unit that

is completely gasketed and sealed from outside contami-

nant’s.

Electrical

High Power Factor ballast for –20°F starting. Product is

factory mounted to the base. Quick disconnects provided

between lamp and electrical assembly. HPS and MH

amp sources up to 100W MH or HPS and up to 57W

Compact Fluorescent sources available with MO length

not exceeding 7".

Finish

Premium fade and abrasion resistant, TGIC Polyester

Powder Coat Finish. Standard colors are Bronze,

Architectural White, Grey and Black. Other architectural

finish colors available including all RA matches.

Base

Rugged cast aluminum. Completely concealed.

Mounting

Base mounts onto foundation with three (3) 1/2" x 12"

anchor bolts on a 5" Dia. bolt circle (a centrally located 2

7/8" x 3 1/2" wire entrance opening provided). Bollard

housing is secured to the base with flathead, counter-sunk

screws for smooth, uncluttered appearance.

bRc

round standard series

bsc

square standard series

Standard series—design features Standard series—design features

Top

Rugged, cast aluminum. Provides rapid heat dissipation.

Encloses the upper reflector so it is hidden from view.

Tamper-proof screws provide easy access to lamp

compartment.

Housing

Consists of a heavy-duty, seamless extruded aluminum

tube. ifts off base for easy access to ballast.

Optics

ower dispersing reflector, in conjunction with a truncated,

octagonal upper collecting reflector, provides low-glare,

highly efficient illumination with optimum uniformity.

EXAMPLE: Using 70W HPS lamps with Bollard Series

luminaires mounted on 20' centers produce a symmetric

light pattern with a max. to min. uniformity ratio of less

that 4:1.

Lens

1/4" wall, impact-resistant clear acrylic. Polycarbonate

lens is optional.

Prismatic refractor

All Bollard Series luminaires are available with an

optional prismatic borosilicate glass refractor to provide

efficient, low-glare light distribution.

Gasketing

Bollards are designed to form a single, integral unit that

is completely gasketed and sealed from outside contami-

nant’s.

Electrical

High Power Factor ballast for –20°F starting. Product is

factory mounted to the base. Quick disconnects provided

between lamp and electrical assembly. HPS and MH

amp sources up to 100W MH or HPS and up to 57W

Compact Fluorescent sources available with MO length

not exceeding 7".

Finish

Premium fade and abrasion resistant, TGIC Polyester

Powder Coat Finish. Standard colors are Bronze,

Architectural White, Grey and Black. Other architectural

finish colors available including all RA matches.

Base

Rugged cast aluminum. Completely concealed.

Mounting

Base mounts onto foundation with three (3) 1/2" x 12"

anchor bolts on a 5" Dia. bolt circle (a centrally located 2

7/8" x 3 1/2" wire entrance opening provided). Bollard

housing is secured to the base with flathead, counter-sunk

screws for smooth, uncluttered appearance.

bRc

round standard series

bsc

square standard series

optical excellence

Glare-free illumination

The Louver Series bollard features carefully designed

louvers that block direct view of the lamp while creating a

channel for high angle light to escape and effectively

illuminate the pathway below. These duel purpose louvers

eliminate glare and provide comfortable fixture viewing

without sacrificing performance.

design flexibility

Add some flair and personality to your

application with the use of optional colored

refractive glass lenses. The Louvered Series

bollards allow the design flexibility with a

selection of highly saturated colors. Producing

a blanket of color on the walkway as well as a

pronounced glow on louvered surfaces, they

feature prismatic refractive technology, ensuring

a uniform distribution of color and light.

UNIFORM ILLUMINATION

The Louvered Series bollard features fluted glass

refractors to direct light rays around louver support

elements, eliminating the potential for unsightly shadows

and streaking in the distribution. oated lamps, in

conjunction with the refractive glass lens, allow the

Louvered Series bollard to produce uniform illumination.

optical excellence

efficient illumination

The McGraw-Edison Standard Series bollard locates the lamp

in the housing top cap preventing direct viewing of the lamp at

pedestrian and motorist level. The multi-piece reflector system

works in unison to maximize efficiency by redirecting otherwise

unuseable light onto the lower reflector which focuses light onto

the pathway.

Optical Control

McGraw-Edison bollards are designed to efficiently direct light downward onto

the walkway while concealing the lamp from direct view, eliminating discomfort

glare and ensuring safety and visibility for pedestrians and motorists.

The McGraw-Edison Bollard Series present a responsible pathway lighting solution

for the environmentally conscience.

top view

side view

optical excellence

Glare-free illumination

The Louver Series bollard features carefully designed

louvers that block direct view of the lamp while creating a

channel for high angle light to escape and effectively

illuminate the pathway below. These duel purpose louvers

eliminate glare and provide comfortable fixture viewing

without sacrificing performance.

design flexibility

Add some flair and personality to your

application with the use of optional colored

refractive glass lenses. The Louvered Series

bollards allow the design flexibility with a

selection of highly saturated colors. Producing

a blanket of color on the walkway as well as a

pronounced glow on louvered surfaces, they

feature prismatic refractive technology, ensuring

a uniform distribution of color and light.

UNIFORM ILLUMINATION

The Louvered Series bollard features fluted glass

refractors to direct light rays around louver support

elements, eliminating the potential for unsightly shadows

and streaking in the distribution. oated lamps, in

conjunction with the refractive glass lens, allow the

Louvered Series bollard to produce uniform illumination.

optical excellence

efficient illumination

The McGraw-Edison Standard Series bollard locates the lamp

in the housing top cap preventing direct viewing of the lamp at

pedestrian and motorist level. The multi-piece reflector system

works in unison to maximize efficiency by redirecting otherwise

unuseable light onto the lower reflector which focuses light onto

the pathway.

Optical Control

McGraw-Edison bollards are designed to efficiently direct light downward onto

the walkway while concealing the lamp from direct view, eliminating discomfort

glare and ensuring safety and visibility for pedestrians and motorists.

The McGraw-Edison Bollard Series present a responsible pathway lighting solution

for the environmentally conscience.

top view

side view

DIMENSIONS

ORDERING INFORMATION

SAMPLE NUMBER: BSL-36-100-MH-MT-BK

Product Family

BSC=Square Bollard

with lear Lens,

& Square Top

BSL=Square Bollard

with Stacked Louvers,

& Pyramidal Top

BRC=Round Bollard

with lear Lens,

& ylindrical Top

BRL=Round Bollard

with Stacked Louvers,

& Dome Top

Fixture Height

2 =24"

28=28"

32=32"

36=36"

2=42"

Lamp Wattage1

26=26W 2

32=32W 2

35=35W 3

2=42W 2

50=50W

57=57W 2

70=70W

100=100W

Lamp Type

MH=Metal

Halide

HPS=High

Pressure

Sodium

CF= ompact

Fluorescent

IC=Incandescent

Voltage5

120=120V

208=208V

2 0=240V

277=277V

MT=Multi-Tap

wired 277V6

TT=Triple-Tap

wired 347V6

Color (add as

suffix/must specify)7

BK=Black

AP=Grey

BZ=Bronze

WH=Architectural

White

NOTES: (1) All HID lamps are medium-base.

(2) ompact fluorescent only.

(3) 35W HPS available in 120V only.

(4) BS /BR only. MOL length of lamp cannot exceed 7".

(5) Product also available in non-US voltages and 50Hz for international markets. onsult factory for availability and ordering information.

(6) Multi-Tap ballast is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V.

(7) Other finish colors available. onsult Architectural olors brochure.

(8) Polycarbonate lens available on BS and BR only.

(9) oated lamp standard. Must specify clear lamp if desired.

(10) Available on BSL and BRL only.

(11) Location of R1 and R2 option on housing subject to height of luminaire.

Options (add as suffix)

F=Single Fuse (120, 277, or 347V)

FF=Double Fused (208 or 240V)

PC=Button Photocontrol

PL=Polycarbonate Lens8

L=Lamp Included9

RB=Royal Blue Glass Jar10

AB=Aqua Marine Blue Glass Jar10

HG=Hunter Green Glass Jar10

RE=Red Glass Jar10

OR=Orange Glass Jar10

R1=Provisional cut for GFI Receptacle11

R2=Installed GFI Receptacle11

42"

(1067mm)

36"

(914mm)

32"

(813mm)

28"

(711mm)

24"

(610mm)

42"

(1067mm)

36"

(914mm)

32"

(813mm)

28"

(711mm)

24"

(610mm)

8" (Rd.)

(203mm)

7" (Sq.)

(178mm)

8" (Rd.)

(203mm)

7" (Sq.)

(178mm)

STANDARD COLORS

Bronze WH

Architectural White

Black AP

Grey

ordering information

Photometrics

BSC-XX-100-MH

100-Watt MH

7,900-Lumen Lamp ( lear ED-17)

Footcandle Table

Select mounting height and read across for footcandle values of

each isofootcandle line. Distance in units of mounting height.

Mounting Footcandle Values for

Height Isofootcandle Lines

2" 1.20 0.60 0.30 0.12 0.06

36" 2.00 1.00 0.50 0.20 0.10

32" 2.40 1.20 0.60 0.24 0.12

28" 3.20 1.60 0.80 0.32 0.16

2 " 4.40 2.20 1.10 0.44 0.22

BSC-XX-100-HPS

100-Watt HPS

8,800-Lumen lear Lamp ( lear ED-17)

10x

5x10x 5x 10x

10x

5x10x 5x 10x

BSL-XX-100-MH

100-Watt MH

7,900-Lumen Lamp ( oated ED-17)

BSL-XX-100-HPS

100-Watt HPS

8,800-Lumen Lamp ( oated ED-17)

10x

5x10x 5x 10x

10x

5x10x 5x 10x

BRL-XX-100-MH

100-Watt MH

7,900-Lumen Lamp ( oated ED-17)

BRL-XX-100-HPS

100-Watt HPS

8,800-Lumen Lamp ( oated ED-17)

10x

5x10x 5x 10x

10x

5x10x 5x 10x

Footcandle Table

Select mounting height and read across for footcandle values of

each isofootcandle line. Distance in units of mounting height.

Mounting Footcandle Values for

Height Isofootcandle Lines

2" 1.20 0.60 0.30 0.12 0.06

36" 2.00 1.00 0.50 0.20 0.10

32" 2.40 1.20 0.60 0.24 0.12

28" 3.20 1.60 0.80 0.32 0.16

2 " 4.40 2.20 1.10 0.44 0.22

Footcandle Table

Select mounting height and read across for footcandle values of

each isofootcandle line. Distance in units of mounting height.

Mounting Footcandle Values for

Height Isofootcandle Lines

2" 1.20 0.60 0.30 0.12 0.06

36" 2.00 1.00 0.50 0.20 0.10

32" 2.40 1.20 0.60 0.24 0.12

28" 3.20 1.60 0.80 0.32 0.16

2 " 4.40 2.20 1.10 0.44 0.22

Inhaltsverzeichnis

Andere Cooper Lighting Landschaftsbeleuchtung Handbücher

Cooper Lighting

Cooper Lighting CML SQUARE CML40MN3VSGBKL Bedienungsanleitung

Cooper Lighting

Cooper Lighting Concourse III UCS10SR223D4 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Vision AVM40MWW3S Bedienungsanleitung

Cooper Lighting

Cooper Lighting ADH080747 Leitfaden

Cooper Lighting

Cooper Lighting ACORN ACN-2 Bedienungsanleitung

Cooper Lighting

Cooper Lighting HMX High-Mast Bedienungsanleitung

$Cooper Lighting Drop Prismatic Refractor OVX40SWW3E4 Bedienungsanleitung$

Cooper Lighting

Cooper Lighting Drop Prismatic Refractor OVX40SWW3E4 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Galleria Square GMA25SWWAR Bedienungsanleitung

Cooper Lighting

Cooper Lighting Streetworks Classical CLB-1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Avenue ARC25MWW5552 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Westminster Post Top Luminaire Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Cooper Lighting

Cooper Lighting Street Works TMU40SWW3SF Bedienungsanleitung

Cooper Lighting

Cooper Lighting Cambria 203 LED Bedienungsanleitung

Cooper Lighting

Cooper Lighting Galleria Round GRA25MWWXX Bedienungsanleitung

Cooper Lighting

Cooper Lighting N175MV Bedienungsanleitung

Cooper Lighting

Cooper Lighting Woodbridge MPW50SR255 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Nighthawk III Bedienungsanleitung

Cooper Lighting

Cooper Lighting Sure-Lites STL StairLite Bedienungsanleitung

Cooper Lighting

Cooper Lighting MCGRAW-EDISON GAR Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison PSL Bedienungsanleitung

Cooper Lighting

Cooper Lighting MPN50SR255 Bedienungsanleitung

Cooper Lighting

Cooper Lighting CMS185, CMS185W Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung

LIGMAN

LIGMAN LA-60022 Bedienungsanleitung

LIGMAN

LIGMAN EU-10016-2 Bedienungsanleitung

HEPER

HEPER ZEROX Hybrid Montage- und Bedienungsanleitung