Cooper Wheelock Series 43T AC Bells Bedienungsanleitung

Description

The Wheelock Series 43T bells provide the durable operation

and dependable performance required for life safety alarm

systems.

A complete range of vibrating models is offered in 6” and 10”

sizes for 115 or 24-volt AC operation in indoor or outdoor

installations. All models provide high sound output with low

power consumption. All models are provided with screw

terminal inputs for secure in-out ﬁeld wiring.

6-INCH BELLS

10-INCH BELLS

Speciﬁcations and Ordering Information

* Refer to Data Sheet #S7000 for mounting options.

1. Typical dBA at 10 feet is measured in an anechoic chamber.

2. All models are provided with in-out screw terminals.

3. Each bell mechanism is adjusted to operate only with the shell provided. Do not mix shells and mechanisms during installation.

Model Number Order

Code

Shell

Size Input Voltage Input

Current

dBA @

10 Ft.

Mounting

Options *

43T-G6-24-R 1627 6” 24 VAC 0.410 86

D,E,J,K,N,O,P,R,S

43T-G6-24-S 1626 6” 24 VAC 0.410 86

43T-G6-115-R 1631 6” 115 VAC 0.085 86

43T-G6-115-S 1630 6” 115 VAC 0.085 86

43T-G10-24-R 1647 10” 24 VAC 0.410 88

43T-G10-24-S 3800 10” 24 VAC 0.410 88

43T-G10-115-R 1651 10” 115 VAC 0.085 88

43T-G10-115-S 3693 10” 115 VAC 0.085 88

Features

• Approvals include: UL Standard 464, Factory Mutual (FM),

California State Fire Marshal (CSFM), New York (MEA) and

Chicago (BFP)

• Complies with OSHA 29,Part 1910.165

• High sound output with low current draw

• 6” and 10” shell sizes in 115 or 24 AC models

• Integral RFI suppression minimizes induced noise on alarm

lines

• Semi-ﬂush mounting to standard 4” square backboxes or

surface mounting to Wheelocks surface backboxes

• Polarized for supervision of alarm lines with screw terminal

inputs for fast and secure in-out ﬁeld wiring of #12 to #18

AWG wire

• Attractive textured ﬁnish to enhance appearance and

durability

• For combined audible (bell) and visual signaling, convenient

retroﬁt assemblies (Series RSSP) are available with Multi-

Candela or single candela strobes (See Data Sheet S0410

or Wheelock Fire Products Catalog)

151-92-E

E5946 7135-0785:108

Series 43T AC Bells

S0600 43T 06/06

NOTE: Due to continuous development of our products, speciﬁcations and offerings are subject to change without notice in accor-

dance with Wheelock Inc. standard terms and conditions.

Wiring

(All Bell Models)

The alarm signals shall be Wheelock Series 43T Bells or approved equal. They shall be UL Listed for Fire Protective

Service with models for vibrating operation and optional steel shells from 6” to 10” diameter. Sound output at 10 feet

shall range up to 88 dBA. The bells shall semi-ﬂush mount to standard 4” square backboxes or surface mount to

Wheelock indoor BB backbox or outdoor WBB backbox. All bell models shall be polarized for line supervision and

shall have screw terminals for in-out ﬁeld wiring. The ﬁnish on all models shall be textured enamel.

Architects and Engineers Speciﬁcations

Wheelock products must be used within their published speciﬁcations and must be PROPERLY speciﬁed, applied, installed, operated, maintained and

operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and in accordance

with local, state and federal codes, regulations and laws. Speciﬁcation, application, installation, operation, maintenance and testing must be performed

by qualiﬁed personnel for proper operation in accordance with all of the latest National Fire Protection Association (NFPA), Underwriters’ Laboratories

(UL), National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other

applicable building and ﬁre standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the

requirements of the local authority having jurisdiction (AHJ).

WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE US-

ING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARN-

INGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY

SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.

TO NEXT

APPLIANCE

OR EOLR

FROM

PRECEDING

APPLIANCE OR

FACP

+-GND

WE ENCOURAGE AND SUPPORT NICET CERTIFICATION

3 YEAR WARRANTY

Made in USA

273 Branchport Avenue

Long Branch, NJ 07740

Phone: (800) 631-2148

Fax: (732) 222-2588

www.cooperwheelock.com

Dieses Handbuch passt für folgende Modelle

Andere Cooper Wheelock Sicherheitssystem Handbücher

Cooper Wheelock

Cooper Wheelock SM87 Series Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock ROS-DC Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock SLS-A-DC Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock RSSPA-24MCC-NW Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock RSS-24MCWH Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock SAFEPATH SP-SVC Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock SQA-DC Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock Series NPS Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock CLR-DC Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock SYM-DC Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock NPS-R-031 Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock Series NPS Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock UTA-1 Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock SAFEPATH4 SP40S Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock SERIES AS Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung