Coopers 10651 Bedienungsanleitung

Car Dash Cam 10651 Instructions for Use

Please read and retain these instructions for future reference v001: 03/11/16

Power Details: Input Voltage of camera: DC 5V, 1A

Input Voltage of car charger: DC 12-24 V

Output Voltage of car charger: DC 5V, 1A

Accessories: USB cable, Car charger, Bracket, User Manual

Please read this instruction manual thoroughly before starting and ensure you are familiar with

the operation of your new CAR DASH CAM

SAFETY INSTRUCTIONS:

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED:

READ ALL INSTRUCTIONS BEFORE USE.

UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.

THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF

STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.

DO NOT USE OUTDOORS.

DO NOT PLACE ON OR NEAR HEAT SOURCES.

USE WITH THE BRACKET PROVIDED AND MOUNT ON THE WINDSCREEN.

DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.

DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED

FOR.

Car Dash Cam

10651

Instrucons for Use

Please read and retain these instrucons for future reference v001: 03/11/16

BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE•

FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE

INTERNAL DAMAGE.

1. Product Structure

1. OK

2. Mode

3. SOS

4. Power

5. Reset

6. MIC

7. Lens

8. USB Slot

9. Bracket hole

10.Screen

11.Indicator

12.TF card slot

13.Up

14.Menu

15.

Down

2. Descripon of Funcon Keys

1) OK buon - In Video Mode, press the OK buon to start recording, press it again to stop. In

Photo Mode, press the OK buon to take a photo. In Menu interface, press the OK buon to

conﬁrm your selecon.

2) Mode buon - Press the Mode buon to change camera mode between Record video / Take

photo / Play back.

3) SOS buon - When recording, press the SOS buon to lock the video ﬁle, which will not be

deleted by Loop recording funcon.

4) Power - Press and hold the Power buon 2-3 seconds to turn on/oﬀ, press Power buon to turn

on/oﬀ the night vision lights.

Reset - Press to Reset.

Car Dash Cam

10651

Instrucons for Use

Please read and retain these instrucons for future reference v001: 03/11/16

7) Lens - Camera lens.

8) USB slot - For connecng PC to transfer data or connecng Car charger for power supply.

9) Bracket Hole - For connecng bracket installaon.

10)Screen - 3.0 inch LCD screen.

11)Indicator - Blue indicator lights up when camera switches on; Red indicator lights up when

charging. Indicator light will turn oﬀautomacally when fully charged; Blue indicator will be

ﬂashing whilst recording video.

12)12) TF Slot - TF Memory Card Slot, it is suggested to choose card in Class 10 and above 8GB. (TF

card not included in standard package).

13)Up buon - In Menu interface, press the Up buon to select an opon. In Standby or Photo

mode, press the Up buon to zoom in.

14)Menu Buon - Press the Menu buon to access the menu interface, press it twice to select the

menu change.

15)Down Buon - In menu interface, press the Down buon to select an opon. In Standby or

Photo mode, press the Down buon to zoom out.

3. Special Funcon Descripon:

3.1 G-sensor

Measures acceleraon and lt.

In video recording mode, when sudden changes occur in lt or acceleraon, the current video ﬁle

will be locked automacally, it will not be deleted by Loop recording funcon.

3.2 SOS

In video recording mode, press the SOS buon to lock the ﬁle, which will not be deleted by Loop

recording funcon.

3.3 Automacally turn on/oﬀ

Aer the car charger is connected, the camera will automacally switch on when the car engine

starts. It will automacally switch oﬀ and save the video ﬁle aer the car engine is shut oﬀ.

3.4. Moon Detecon

Aer the car charger is connected, the camera will automacally switch on when the car engine

starts. Please turn Moon Detecon “ON” from the video mode menu.

Aer 5-12 seconds recording, Stand-by mode is turned on automacally, a yellow dot will be

ﬂashing in the top le corner. If anything is moving in front of the camera, video will record

automacally.

MIC - Sound receiver.

Car Dash Cam 10651 Instructions for Use

Please read and retain these instructions for future reference v001: 03/11/16

4. Record video / Take photo operations

4.1 Power on/off

Press and hold the Power button 2 to 3 seconds to turn on the camera, the blue indicator lights up.

Press Power button again for 2 to 3 seconds to turns off the camera, the blue indicator switches off.

Note: When turning on the camera on a low battery, you will get a notification of LOW BATTERY

VOLTAGE, and the camera will turn off automatically.

4.2 REC mode

Press the Mode button to Video mode, the top left corner of the screen will show you a Recorder

icon, then press the OK button to start video recording, at the same time, a Red dot will flash on the

screen.

4.3 Photo mode

Press the Mode button to Photo mode, the top left corner of the screen will show you a camera icon,

then press the OK button to take one picture, at the same time the screen is flashing once.

In Photo menu, you could choose Capture time for each photo, Single/2s/5s/10s Timer as an option.

4.4 Video / Photo playback

Press the Mode button switch to Playback mode, the top left corner of the screen will show you a

Playback icon. Press the Up / Down button to select the file you want to display, and press OK to play

back the selected video.

4.5 Menu Setting

Press the Menu button to access the menu interface. Every mode has a different menu. For instance,

if you want to change the selection to Video, you should press the Mode button and switch to Video

mode, then press the Menu button.

Press the Up/Down button to select a specific option, press OK to confirm.

Press the Menu button again to exit the setting.

4.6 Time setting

Press the Menu button to enter for Set mode, press Menu button again to access the set up menu,

press the Up button to select the date and time options. Press the OK button to switch between Year

/ Month / Day / Hour, and press the Up/Down button to adjust the required value, press the OK

button to confirm the modification.

4.7 USB mode

Connect camera with a computer by USB cable, press the Power on button, it will show you a USB

menu, press the Up/Down to select the mode you want.

USB Disk: In this mode, you can access video files and photos.

5. Battery Instruction

5.1 Battery indication Image

Full Battery Slightly low battery Low battery Battery empty

Car Dash Cam 10651 Instructions for Use

Please read and retain these instructions for future reference v001: 03/11/16

5.2 Battery recharge

There are 3 methods to charge the battery, the red indicator lights up when charging, the charging

time is about 180 minutes, and the red indicator light switches off automatically when the battery is

fully charged.

Method 1: Using a power adapter for charging (DC Adapter is not included in the standard package)

Method 2: USB charging

Method 3: Using Car charger for charging

Note: Press the Reset button on the camera when the system is not responding.

6. Installing in Vehicles

6.1 Mount to Windshield

1) Attach the bracket to the device, slide it into the bracket holder until you hear a click.

2) Before installing the bracket, please use alcohol to clean the windscreen and suction cup of the

bracket. Wait until dry and press suction-cup on the windscreen.

Car Dash Cam 10651 Instructions for Use

Please read and retain these instructions for future reference v001: 03/11/16

3) Hold the base firmly on the windscreen and press down the clamp to mount the car holder to the

windscreen. Please ensure the base is securely locked in place.

6.2 Adjust the device position

1) Loosen the knob to swivel the device vertically or horizontally.

2) Tighten the knob to ensure the car dash cam is securely locked in place.

Clamp

Car Dash Cam 10651 Instructions for Use

Please read and retain these instructions for future reference v001: 03/11/16

7. Product Specification

Feature

Real HD 720P Car DVR

Video Resolution

1920*1080/1440*1080/1280*720/848*480/640*480/320*240

LCD Screen

3.0”(16:9)

Lens

120 degree wide lens angle

Video file format

AVI

Photo resolution

12M/10M/8M/5M/3M/2MHD/1.3M/VGA

Photo format

M-JPEG

G-sensor

Supported

Loop recording

Supported

Motion Detection

Supported

Automatically Power on / off

Supported

Time Stamp

Y/M/D/H

Built-in Memory

32MB

MIC

Supported

Night vision

Supported

Frequency

50HZ/60HZ

USB

USB 2.0

Power interface

5V 1A

Battery

Built-in 200mAh

Color

Black

Language

English, Russian, Chinese, Japanese, Korean, etc.

8. Trouble Shooting

For problems in normal operating situations, please try the methods below:

8.1 Cannot take photo and record

Check if the TF card has enough space or is locked.

8.2 Automatically stops when recording

Use a compatible high speed TF card with SDHC.

8.3 Unclear video

Check if there is any dust or fingerprints, and use lens wipes to clean the camera lens.

8.4 Black image when recording sky or water scene

Images with big contrasts will influence the automatic exposure function of the camera, you can

adjust EV in setting mode to correct.

8.5 Color is not perfect on cloudy day or with outdoor lighting

Set the White balance function to automatic.

8.6 System crash

Restart by pressing the Reset button after system crash.

WARNING

•CHECK THE APPLIANCE AND POWER CABLE CAREFULLY FOR DAMAGE BEFORE EACH USE.

•FOR ADULT USE.

•KEEP THE APPLIANCE AWAY FROM CHILDREN.

Car Dash Cam 10651 Instructions for Use

Please read and retain these instructions for future reference v001: 03/11/16

•DO NOT USE IF THE POWER CORD OR PLUG IS DAMAGED. TO BE REPAIRED BY A QUALIFIED

ELECTRICIAN OR TO BE REPLACED BY THE MANUFACTURER, SERVICE AGENT OR SIMILARLY

QUALIFIED PERSON, IN ORDER TO AVOID A HAZARD.

CARE AND CLEANING INSTRUCTIONS

Always switch off and unplug before cleaning.

Do NOT immerse in water. Risk of electric shock.

Do NOT use abrasive cleaners or sharp utensils to clean this appliance.

Wipe surfaces with a soft dry cloth.

Allow to dry thoroughly before further use.

Store the unit in a cool, dry place.

BATTERIES

•Keep batteries away from children and pets.

•Do not mix used and new batteries.

•Remove the batteries if left for long periods.

•Never dispose of batteries in a fire.

•Battery disposal, spent or expired batteries must be properly disposed of and recycled in

compliance with local regulations. For detailed information, contact your local authority.

•Follow the battery manufacturer’s safety, usage, and disposal instructions.

DISPOSAL

•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your

local recycling regulations.

•At the end of the product’s lifespan please dispose of it at an authorised household WEEE

waste recycling centre.

Inhaltsverzeichnis

Andere Coopers Dashcam Handbücher

Coopers

Coopers 9673 Bedienungsanleitung

Beliebte Dashcam Handbücher anderer Marken

Cansonic

Cansonic UltraDuo Z2 Bedienungsanleitung

Gazer

Gazer F720 Bedienungsanleitung

HP f500g Bedienungsanleitung

Xblitz

Xblitz TANGO 4K Bedienungsanleitung

Rexing

Rexing M1 Bedienungsanleitung

Maka Technologies

Maka Technologies Marbella MXPro Bedienungsanleitung

NESA

NESA NRC-80DLM Montage- und Bedienungsanleitung

Kaiser Baas

Kaiser Baas R20 Bedienungsanleitung

Boyo

Boyo VTM43TC Bedienungsanleitung

Minolta

Minolta MNCD37 Bedienungsanleitung

Thinkware

Thinkware FA10 Bedienungsanleitung

Momento

Momento MD-5200 Bedienungsanleitung

BlackVue

BlackVue DR590X-1CH Bedienungsanleitung

HP F300 Bedienungsanleitung

CammSys

CammSys BlackSys BH-300 Bedienungsanleitung

Snooper

Snooper DVR-2HD Bedienungsanleitung

Lukas

Lukas Q900 Bedienungsanleitung

RVS

RVS 450C Bedienungsanleitung