3. Attach the front axle su ort (9) to
the trolley base (10) using 8x20mm
carriage su ort bolts (260,
washers (21) and locking nuts (22) –
see left.
4. Attach the wheels by fitting the wheel
s acers (23) onto the axles before
attaching the wheels (5) ensuring the
valve stems are facing outwards.
Secure using 12mm wheel washers (25)
and 12mm wheel locking nuts (24) –
see right.
5. Attach the handle to the yoke (11) and
the lastic cou ling (13) using 8X60mm
handle bolt (27), washer (21) and
locking nut (22). Attach the handle (14
or trailer hitch (15)using the handle in
(18) and clevis in (19) – see right.
6. Attach the front anel (3) back anel
(4) and side anels (2) to the trolley
base (1) using the fence ins (8). Use
the locking handles (20) to attach the front and back anels to the side anels. Secure
using locking nuts (22).
7. Fit the tar aulin and secure
using the ress studs.
