1) Uncoil the charging lead, gently remove the socket caps covering the connectors.
(Complete one end at a time, plugging in the open connector before removing
the opposite cap)
2) Securely connect to the charging outlet, then connect the opposite end securely
to the vehicle charging inlet.
3) Ensure the connections are secure.
NOTE: Do not force into place, if there are any obstructions take caution and remove
them before inserting the plug.
1) Disconnect from the vehicle charging inlet.
2) Close the protective cap of the vehicle charging inlet.
3) Place the protective cap onto the Type 2 connector.
4) Disconnect from the charging outlet.
5) Place the protective cap onto the Type 2 connector.
6) Store your Charging cable.
NOTE: Never use undue force when plugging in or
disconnecting from charging inlets or outlets.
6
CEVB –Storage Bag (Sold Separately)
IMPORTANT: Ensure no water
or debris enters into the
connectors prior to charging.
The connectors/plugs should
be clean and dry.
