Coremorrow N31 Bedienungsanleitung
N31 Linear Piezo Motor
User Manual
Version: V1.0
This document describes the following products:
■N31.25E N31.25K
■N31.50E N31.50K
■N31.100E N31.100K
DECLARATION
Thank you for choosing Coremorrow's products!
This user manual is applicable to N31 Linear Piezo Motor. For your smooth
and correct use of this product, please read this manual carefully before use.
Please follow the instructions in the manual installation and use procedures.
Improper operation may cause injury to the operator or damage to the
product. Therefore, the entire installation and operation process should be
completed by a professional with a certain foundation and understanding of
the product principle, or under the guidance of a professional.
If the product is disassembled or modified without permission, our company
will not be responsible for any consequences arising therefrom.
It is illegal to change the product model and other false sales of our
products. Users are advised to be vigilant. Once you find out or be deceived,
contact us directly, we will crack down on illegal activities and prevent
deception and economic losses. CoreMorrow will certainly investigate legal
responsibility of the illegal subject and related parties.
With the continuous development and innovation of technology, we will
add the latest information to the manual as needed without notice. Please
contact us if you need any information.
1
1. Introduction ........................................................................................................................................2
1.1 Purpose and content ................................................................................................................2
1.2 Symbol and meaning................................................................................................................2
1.3 Expected reader..........................................................................................................................2
1.4 Manual lost replacement ........................................................................................................2
2. Safety Guide........................................................................................................................................3
3. Product Overview ...........................................................................................................................4
3.1 Characteristics.............................................................................................................................4
3.2 Motion Direction........................................................................................................................4
4. Operating Environment .................................................................................................................4
5. Installation and Operation.............................................................................................................5
5.1 Installation and announcement............................................................................................5
5.2 Load................................................................................................................................................5
5.3 Operating......................................................................................................................................8
6. Transportation and Inspection .....................................................................................................8
6.1 Transportation.............................................................................................................................8
6.2 Unpacking inspection...............................................................................................................8
7. Maintenance and processing........................................................................................................9
7.1 Problem Processing ..................................................................................................................9
7.2 Daily maintenance.....................................................................................................................9
8.Customer Service ............................................................................................................................10
9.Contact us..........................................................................................................................................10
Contents
2
N31 Linear Piezo Motor User Manual
1.
2.
1. Introduction
1.1 Purpose and content
The manual is mainly for your smooth and correct use of piezo motor.
The manual contains all necessary information for N31 linear piezo motor.
The manual describes the precautions during installation and use.
1.2 Symbol and meaning
DANGER: Improper handling may could cause injury to the operator.
Attention: Improper handling can cause damage to the equipment.
No order between items.
1.3 Expected reader
The manual default user has knowledge of piezo motor and controllers, and has a basis for
its installation and use.
1.4 Manual lost replacement
If the manual is accidentally lost, please contact our customer service department, we will
send you the latest version of user manual.
Please operating in order.
3
In order to prevent damage to the product caused by improper operation, please
pay attention to following points when using:
N31 piezo motor is used as much as possible in dust-free, oil-free, lubricant-free
environments;
Since the product adopts flexible structure design, it is recommended that the load
not exceed the bearing capacity of the product. Pay attention to the torque when
loading. Do not twist or twist the load surface to avoid damage to the structure;
Do not disassemble the product to avoid product damage;
Avoid stretching and bending the cable interface to prevent damage to the cable;
Please use the dedicated cable provided by us to connect the piezo motor and piezo
controller;
Please do not use cable extension wire, if need longer cable, please contact us.
Temperature changed and pressure will charge the piezo motor. Piezo motor
will remain charged for a period of time disconnected from the controller, so the
operator should pay attention when using it:
Do not disassemble N31 piezo motor;
Discharge N31 piezo motor before installation, it could be achieved by connecting
to the controller;
Do not pull out the controller during operation;
Before using, please check whether the connecting wire of the product is in good
condition, whether the product and the controller are effectively protected from
grounding, in case of danger, please strictly regulate the operation during operation,
do not touch it (up to 150V voltage) after power on.
2. Safety Guide
N31 linear piezo motor is designed with advanced technology and safety standards, for
safety and proper use of the product, please pay attention to following points when using:
4
N31 Linear Piezo Motor User Manual
Operating temperature: 0~50℃
Environment free of dust, clean, and non-corrosive substances
Relative humidity: <60%
Low voltage piezo actuator recommended voltage between 0 and 120V for long-
term and high-reliability operation
Motion direction of N31
3. Product Overview
3.1 Characteristics
Large blocking force
Automatic zero position after power-on
Optional grating sensor
Optional 2 or 3 axes
Wear-resistant material
Vacuum non-magnetic compatible
Closed-loop automatic return after accidental touch
3.2 Motion Direction
4. Operating Environment
5
N31 Installation diagram
Before installation, first check the safety, such as whether the cable is damaged or broken,
and whether the power supply has grounding protection.
5.1 Installation and announcement
1. Ensure that the installation plane is relatively flat.
2. Fix the platform with M3 screws and tighten it.
3. Install load, properly tighten, load should not exceed 5kg.
N31 installation diagram is shown below:
5. Installation and Operation
Travel mechanism
Fixed mounting
(M3)
Outlet
Load connection(M4) Load connection(M2.5)
5.2 Load
When installing the load, ensure that the load mass is less than the max load of the N31,
and install the load as much as possible at the center of the moving surface.
The correct placement of the load is shown below:
Load applied to the center of piezo motor
6
N31 Linear Piezo Motor User Manual
Try not to let the load center of gravity exceed piezo motor
Do not load longer loads and add to the side of the piezo motor
It is forbidden to load the load on one side of the piezo motor, which would cause serious
damage to the product, as shown in the following figure:
For protection, we don't recommend the load is too high. If it is used a higher load, please
reduce the position center of the load gravity.
The error placement method is as follows:
If the screws used in tightening and connecting are too long, the screws will not be
installed or some of screws will leak out, which will scratch the piezo motor and affect the
motion accuracy. If the screws are too short, the connection will not be compact and easy
to loosen. Looseness could damage the internal structure of the piezo motor.
We recommend using the connection method shown below:
7
Correct connection
Please do not connect as shown below:
Incorrect connection
Note:
Slowly tighten the load when installing it, and the torque should not be too large to
avoid damage to mechanism.
Avoid stretching and bending cables.
Please connect N31 and controller with special cable provided by CoreMorrow.
Please do not extend the cable without authorization, please contact us if you need
a longer cable.
8
N31 Linear Piezo Motor User Manual
5.3 Operating
Please confirm the following information before starting the power supply:
The environment meets requirements of N31 operating environment;
The fixing screws must be tightened;
The above information is determined to perform controller related operations:
1. Please carefully read piezo controller user manual before operating, then start the
controller;
2. Set the piezo controller to zero;
3. It could work normally within the rated voltage range of piezo motor.
4. Please set the piezo controller to zero after used.
5. If abnormal noise or oscillation occurs during use, immediately turn off the power and
check parameter settings.
6.1 Transportation
Product is packed in carton. The transportation is carried out under the condition of
packaging. This product can be transported by various means of transportation under
normal conditions. During transportation, it should avoid direct rain and snow, avoid
contact with corrosive substances, and avoid strong collision, try to avoid improper
behavior such as squeezing, irregular placement.
6.2 Unpacking inspection
Please check below information:
Before opening the package, please carefully check the packaging for damage,
bruising, wetting, moisture, deformation, etc.;
Please check the parts on a case-by-case basis based on the supply contract and the
packing list;
Whether there is obvious damage on the surface of the product;
6. Transportation and Inspection
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere Coremorrow Motor Handbücher
