CORNFIELD ELECTRONICS DuoPoly Benutzerhandbuch
DuoPoly
Quick Operation Guide
Version 2.42
Cornfield Electronics
main>
r right voice
l left voice
k push console's virtual keyboard
p select preset (0, 1, 2, 3, 4)
v set volume (0 to 255)
w select waveform (0, 1, 2*)
* latch oscillator frequencies (geometric)
+ latch oscillator frequencies (arithmetic)
u unlatch oscillator frequencies
x set transposition amount (in semi-tones)
[ start sequencers
] stop sequencers
| pause/resume sequencers
.mute
< unmute
! reset
? display info
ESC or `exitsketch
* waveform 2 available only for __STNDLONE__ and __BAREBONE runtime models
(continued ...)
main
left button right button
press left voice press right voice
tap tap
tap-tap exit sketch tap-tap
volume
right> or left>
d detune oscillator (-128 to 127, total range is a quarter tone )
e push envelope control
E push effects chain
f set oscillator frequency (20.0 to 20000.0)
g set glide speed (0 to 255, 0 = off)
k push console's virtual keyboard
S push sequencer
t set sequencer tempo (15.0 to 20000.0)
T push tremolo control
V push vibrato control
v set volume (0 to 255)
w select waveform (0, 1, 2*)
* latch frequency geometrically
+ latch frequency arithmetically
[ start sequencer
] stop sequencer
| pause/resume sequencer
.mute
< unmute
! reset
? display info
ESC or ` return to main panel
* waveform 2 available only for __STNDLONE__ and __BAREBONE__ runtime models
(continued ...)
right or left
left button right button
press scroll pots up press scroll pots down
tap - 1 octave tap + 1 octave
tap-tap return to main panel tap-tap run key menu once
tap-press tap-press program a sequence
Sqnc>
r record a sequence (push step programmer)
t set sequencer tempo (15.0 to 20000.0)
[ start sequencer
] stop sequencer
| pause/resume sequencer
! reset
? display info
step>
SPACE or . ++duration
z C
sC#
xD
dD#
cE
vF
gF#
bG
hG#
nA
jA#
mB
,highC
0 thru 8 select octave 0 thru 8
? display current octave
ESC or ` commit sequence
left button right button
press press ++duration
tap - 1 octave tap + 1 octave
tap-tap commit sequence tap-tap
envelope>
a set attack time (0 to 255)
d set decay time (0 to 255)
r set release time (0 to 255, 0 = hold)
s set sustain level (0 to 255)
~ set legato retriggering
' set staccato retriggering
.mute
< unmute
! reset
? display envelope state
ESC or ` exit emvelope panel
(continued ...)
envelope
left button right button
press scroll pots up press scroll pots down
tap -1 octave tap +1 octave
tap-tap exit envelope panel tap-tap run key menu once
tremolo>
f set tremolo frequency (0.01 to 20.0)
d set tremolo depth (0.0 to 1.0)
t set trigger count (# half-cycles to traverse: 0-255)
~ set legato retriggering
' set staccato retriggering
+ trigger starts af “softest” level, and increases
- trigger starts at “loudest” level, and decreases
.mute
< unmute
! reset
? display tremolo state
ESC or ` exit tremolo panel
(continued ...)
Andere CORNFIELD ELECTRONICS Synthesizer Handbücher
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS Mantra Bedienungsanleitung
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS Dronetic Bedienungsanleitung
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS Quadrant Bedienungsanleitung
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS DuoPoloy Benutzerhandbuch
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS Xoid Bedienungsanleitung
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS Arpology Bedienungsanleitung
CORNFIELD ELECTRONICS
CORNFIELD ELECTRONICS ArduTouch Bedienungsanleitung
