Cosen C-510MNC Bedienungsanleitung

COSEN SAWS



C-510MNC

SNC‐100ProgrammableAutomatic

Hinge‐TypeMiter‐CuttingHorizontalBandsaw



(CE&Non‐CEModels)



InstructionManual



ThePinnacleofCuttingPerformance

CosenMechatronicsCo.,Ltd.



NOTE:

Read this instruction manual carefully to familiarize yourself with the installation,

operation and maintenance of your COSEN bandsaw machine.

Operate the machine following the procedures described in the manual to prevent

personal injuries or machine damage.

Keep this manual handy and refer to it whenever you are uncertain of how to

perform any of the procedures.

For technical support or parts purchase, please contact your nearest COSEN

representative or our service center:

For Europe:

email: [email protected]

phone: +31-77-7600280

fax: +31-77-7600288

web: www.cosensaws.eu

For Taiwan and other countries:

email: [email protected]

phone: +886-3-5332143

fax: +886-3-5348324

web: www.cosen.com.tw

For US, Mexico, and Canada:

email: [email protected].

phone: +1-704-943-1030

toll free: +1-877-SAWING1

fax: +1-704-943-1031

web: www.cosensaws.com

For China:

email: service@cosensaws.cn

phone: +86-152-50127815

web: www.cosensaws.cn

Instruction Manual: C-510MNC

SNC-100 Programmable Automatic Hinge-Type Miter-Cutting Horizontal Bandsaw

(CE & Non-CE Models)

Ver.8 2017/6/15

No part of this publication may be photocopied or otherwise reproduced without the prior written

permission of COSEN.

Printed in Taiwan

FROM THE MANUFACTURER

Thank you for your purchase of COSEN’s bandsaw machine and your trust in the COSEN

brand.

We are excited to have you as our valued customer and look forward as much as you do to

the accelerated productivity, long-lasting endurance and superb cost-effectiveness this

machine is about to bring to you.

To ensure you are fully utilizing our machine and being advantaged in every possible way,

please do take your time and read through this instruction manual.

Any comment or suggestion in making our service better, please do not hesitate to let us

know. Thank you again!



Safety rules

Make sure your work area is cleared of uninvited people and obstacles

every time before you start operating the machine.

Never step or stand on the roller table. Your foot may slip or trip on the

rollers and you will fall.

Never wear gloves or loose clothing when operating the machine. It may

lead to serious injury if they are caught in the running machine. Wrap or

cover long hair.



Never touch the running saw blade with gloves or not. It is dangerous if

your hands, clothing or gloves are caught by the running blade.



Make sure any use of fire is prohibited in the shop and install a fire

extinguisher or other fire control device near the machine when cutting

titanium, magnesium, or any other material that produces flammable chips.

Never leave the machine unattended when cutting flammable materials.

Use a water-soluble cutting fluid on this machine. Oil-based cutting fluids

may emit smoke or catch fire, depending on how they are used.



Never cut carbon or any other material that may produce and disperse

explosive dust. It is possible that sparks from motors and other machine

parts will ignite and explode the air-borne dust.

Safety rules



Never adjust the wire brush or remove chips while the saw blade is still

running. It is extremely dangerous if hands or clothing are caught by the

running blade.



Stop the saw blade before you clean the machine. It is dangerous if hands or

clothing are caught by the running blade.



Never start the saw blade unless the workpiece has been clamped firmly. If

the workpiece is not securely clamped, it

will be forced out of the vise

during cutting.

Take preventive measures when cutting thin or short pieces from the work

to keep them from falling. It is dangerous if the cut pieces fall.



Use roller tables at the front and rear sides of the machine when cutting

long work. It is dangerous if the work piece falls off the machine.

Turn off the shop circuit breaker switch before performing maintenance on

the machine. Post a sign indicating the machine is under maintenance.

Table of Contents

Section 1 –Safety Information

1-1

Safety Instructions ………………………………………………………………………………………………………

1-1

Safeguard Devices ……………………………………………………………………………………………………….

1-3

Illustration: Safety Fence ………….……………………………………………………………………………..…

1-4

Emergency Stop ………………………………………………………………………………………………………….

1-5

Illustration: Emergency Stop ………………………………………………………………………………………

1-6

Safety Labels ……………………………………………………………………………………………………………….

1-7

Illustration: Safety Labels ………………………………………………………………………………………..…

1-8

Hearing Protection ………………………………………………………………………………………………………

1-9

CE Compliance …………………………………………………………………………………………………………….

1-9

Risk Assessment ………………………………………………………………………………………………………….

1-9

Section 2 –General Information

2-1

Specifications ……………………………………..……………………………………………………………………….

2-2

Machine Parts Identification ……………………………………………………………………………………….

2-3

Floor Plan …………………………………………………………………………………………………..……………….

2-4

Section 3 –Moving & Installation

3-1

Location & Environment ………………………………..……………………………………………………………

3-1

Unpacking & Inspecting ……..……………………………………………………………………………………….

3-2

Lifting …………………………………………..………………………………………………………………….………….

3-3

Illustration: Lifting Points …………………………………………………………………….……………….……

3-5

Removing Shipping Bracket …………………………..……………………………………………….……………

3-6

Cleaning …………………………………………..…………………………………………………………….……………

3-6

Installing …………………………...………………………………………………………………………….…………….

3-6

Supplying Hydraulic Oil …………………………………………………………………….…………….

3-6

Supplying Coolant ………..………………………………………………………………….……………..

3-7

Connecting Electric Power ……………………………………………………………….……………..

3-7

Leveling …………………………………………………………………….……………………………………

3-8

Anchoring the Machine …………………………………………………………………….……………

3-9

Installing Roller Table (Optional) ………………………………………………….………………….

3-9

Installing Fire Control Device ………………………………………………….………………………

3-9

Relocating ………………………...…………………………………………………………………….………………….

3-9

Section 4 –Operating Instruction

4-1

Safety Precautions …………………..…………………..……………………………………….…………………….

4-2

Before Operating …………………………..…………………………………………………………………………….

4-3

Control Panel ……..……………………………………..………………………………………….…………………….

4-4

Table of Contents

Control Panel ………………….………………………………………………………………………..…….

4-4

Control Buttons ……………………………………………………………………………………….……..

4-5

Blade Descend Pressure & Speed ………..…………………………………………………….……

4-7

HMI Touch Screen & Functions …………………………………………………………….…………

4-7

HMI Error Codes ………………………..……………………………………………………….………….

4-17

Standard Accessories ………….………………………..……………………………………………….……………

4-18

Optional Accessories …….…….………………………..…………………………………………….………………

4-20

Unrolling & Installing the Blade …………………………………………………………………….…………….

4-22

Adjusting Wire Brush ………..……………………………………………………………………….……………….

4-25

Adjusting Saw Arm ………..……………………………………………………………………….…………………..

4-25

Adjusting Coolant Flow ………..………..…………………………………………………………………..…….…

4-26

Placing Workpiece Onto Workbed ………..………..…………………………………….…………………….

4-26

Positioning Workpiece for Cutting ………..………..………………………………….…………………….…

4-27

Adjusting Blade Speed ………..………..………………………………………………………………………….…

4-28

Breaking-In the Blade ………..………..…………………………………………………………………..……….…

4-28

Test-Running the Machine ………..………………..…..………………………………………………………….

4-28

Cutting Operation ………..………..……………………………………………..…………………………………….

4-29

Starting an Automatic Operation ………..………..………………………….…………………………………

4-30

Using Top Clamp for Bundle Cutting ………..……….…………………………………………………………

4-30

Terminating a Cutting Operation ………..………..…………………………………….……………………….

4-31

Section 5 –Electrical System

5-1

Electrical Circuit Diagrams ……….…………………..……………………………………………………………..

5-1

Section 6 –Hydraulic System

6-1

Hydraulic Diagrams ……….…………………..……………………………………………………………….……….

6-1

Section 7 –Bandsaw Cutting: A Practical Guide

7-1

Introduction ……………………….…….…………………..…………………………………………………………….

7-1

Saw Blade Selection ………………….…………………..……………………………………………………………

7-2

VISE LOADING …………….…………………..………………………………………….………………………………

7-3

BladeBreak -In ……………………………………………………………………….……………………..

7-3

Section 8 –Maintenance & Service

8-1

Introduction ……………………….…….…………………..…………………………………………………………….

8-1

Basic Maintenance ………………….…………………..…………………………………………….……………….

8-1

Maintenance Schedule …………….…………………..…………………………………………………………….

8-1

Before Beginning a Day’s Work ……………………………………………………………………….

8-1

After Ending a Day’s Work …………………………………………………….………………………..

8-1

After Ending a Day’s Work …………………………………………………….………………………..

8-1

iii

Table of Contents

Every Month ………………………………………………………………………….……………………….

8-2

Every Three Months ………………..…………………………………………….……………………….

8-2

Every Six Months ……………….………………………………………………….……………………….

8-2

Storage Conditions …………………………....………..……………………………………………………………..

8-2

Terminating the Use of Machine ……..…………..……………………………………………………………..

8-3

Oil Recommendation for Maintenance ……………………………………………………………………….

8-4

Section 9 –Troubleshooting

9-1

Introduction ……………………….…….…………………..…………………………………………………………….

9-1

Precautions ………………….…………………..…………………………………………………………………….....

9-1

General Troubles & Solutions ………………………..…………………………………………………………….

9-2

Minor Troubles & Solutions ………………………..………………………………………………..…………….

9-3

Motor Troubles & Solutions ………………………..…………………………………………………..………….

9-3

Blade Troubles & Solutions ………………………..………………………………………………………………..

9-4

Sawing Problems & Solutions ………………………..……………………………………………………………

9-5

Re-Adjusting the Roller Table ………………………..…………………………………………………………….

9-6

Section 10 –Parts

10-1

Spare Parts Recommendations …………………..……………………………………………………………….

10-1

Part List ……………………………………………………………………………………………………………………….

10-2

Section 11 –Warranty

11-1

Warranty …………………..………………………………………………………………………………………………..

11-1

Inhaltsverzeichnis

Andere Cosen Gesehen Handbücher

Cosen

Cosen AH-250H Bedienungsanleitung

Cosen

Cosen C2 Bedienungsanleitung

Cosen

Cosen C-260NC Bedienungsanleitung

Cosen

Cosen V2026NC Bedienungsanleitung

Cosen

Cosen SH-1000F Bedienungsanleitung

Cosen

Cosen C-420NC Bedienungsanleitung

Cosen

Cosen SH-700DM Bedienungsanleitung

Cosen

Cosen MH-350DM Bedienungsanleitung

Cosen

Cosen MT-150 Bedienungsanleitung

Cosen

Cosen SVT-6070H Bedienungsanleitung

Cosen

Cosen C-620NC Bedienungsanleitung

Cosen

Cosen C-320NC Bedienungsanleitung

Cosen

Cosen SH-7550S Bedienungsanleitung

Cosen

Cosen SH-330ER Bedienungsanleitung

Cosen

Cosen SH-510LDMM Bedienungsanleitung

Cosen

Cosen SH-710LDM Bedienungsanleitung

Cosen

Cosen SH-460M Bedienungsanleitung

Cosen

Cosen MH-1016JA Bedienungsanleitung

Cosen

Cosen CNC-800DM Bedienungsanleitung

Cosen

Cosen C-650MNC Bedienungsanleitung

Cosen

Cosen SH-250R Bedienungsanleitung

Cosen

Cosen C3 Bedienungsanleitung

Cosen

Cosen SH-3026L Bedienungsanleitung

Cosen

Cosen MT-105 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung