150112 E1
10 ft x 20 ft / 3 m x 6 m Steel Frame Canopy
ITM./ART. 781893
Instruction Manual
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
For parts and customer service, please call 1-800-867-9018 in U.S. and Canada (English and Spanish)
Monday –Friday, 8:30 am to 4:30 pm, Pacific Time. Or email: service@zhengteusa.com.
For replacement parts, provide a copy of your purchase receipt as proof of purchase or provide tracking number on roof cover
sewn-in label. Tracking number is marked as a series of letters and numbers. DO NOT REMOVE SEWN-IN LABEL ON
ROOF COVER.
View assembly video and instruction manual at www.zhengteusa.com.
Consult with your local governing authority/local municipal codes regarding installation of temporary structures
before assembly. Some jurisdictions may require permits for, or otherwise regulate, installation and use.
WARNING: KEEPALL FLAME AND HEAT SOURCES AWAY FROM THIS CANOPY FABRIC.
This canopy meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with
any flame source. The application of any foreign substance to the canopy fabric may render the flame-resistant
properties ineffective.
WARNING:
For outdoor use.
This is a temporary structure and not recommended as a permanent structure.
This canopy is not recommended for severe weather conditions which include high winds and snow.
Remove the roof before severe weather conditions, including strong winds and snow.
Snow should never be allowed to accumulate on the roof.
PRIOR TO ASSEMBLY:
Choose the site for your canopy carefully.
The foundation must be level.
Keep away from overhead utility lines, tree branches, or other structures.
Check for underground pipes or wires if digging is required.
Do not install near roof lines or other structures that could shed snow, ice, or excessive rain run-off onto the canopy.
Assemble the canopy as close to its final location as possible.
A minimum of 2 people are required for assembly.
ANCHORING INSTRUCTIONS:
Proper anchoring of the frame is required for safety.
Any structure not anchored securely has the potential to fly away during high wind causing damage and safety
hazard.
How the item is anchored, and the hardware required, will vary based upon the set up location.
Do not anchor to pavers / pavement slabs because they are not a solid foundation.
It is recommended to use one of the following methods to anchor each post. See Page 7.
1. Use the 8 ground stakes provided to secure the base plates if installed on soft ground. Tie the Olefin straps
to each corner of the canopy roof and secure to the 4 remaining ground stakes.
2. Insert concrete bolts (not included) through all 8 base plates if mounting to concrete.
Periodically check the anchors to ensure that they remain secure.
CARE AND MAINTENANCE
ROOF / SIDE PANELS / ELASTIC BALLSTRAPS:
Gently clean with an environmentally-friendly soap solution and water using a sponge.
Do not use abrasive materials, wire brushes, chemicals, harsh cleaners, or bleach.
Rinse using a garden hose and air dry. If removed, ensure thoroughly dry prior to storage.
Do not use a pressure washer.
FRAME:
Gently clean with an environmentally-friendly soap solution and water using a sponge.
Do not use abrasive materials, wire brushes, chemicals, harsh cleaners, or bleach.
Rinse using a garden hose and air dry.
Do not use a pressure washer.
If there are nicks, chips and scratches, go to you local hardware store or home center and obtain a closest match
touch-up paint suitable for outdoor metal use. Follow instructions that come with the paint.
