
12. Use the product in a well-ventilated area. .
13. This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles when
moving this heater. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes, and curtains at
least 3 feet (0.9m) from the front of the heater and keep them
away from the sides and rear.
14. Do not touch hot surfaces. Always use the handle of the
product. Use protective oven mitts or gloves to avoid burns
or serious personal injury.
15. A heater has hot and arcing or sparking parts inside.
16. Always maintain your distance from the product while it is use
to avoid serious burns and personal injury
17. Never insert fingers, hair, metallic objects or any other item
into the vents and openings of the product, as an
electrocution, fire, and/or burn hazard exists.
18. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock, fire,
or damage to the heater.
19. Never block the air openings of the product or place it on a
soft surface (i.e., a bed or a couch) where the air openings
may be blocked. Wipe the air openings clean if they become
clogged.
20. Do not use this product to dry or heat clothing, shoes, pipes,
or any other item.
21. Do not place or expose this product to water or other liquids.
22. Do not move the product when it is heated. Allow the product
to thoroughly cool before handling it.
23. Do not run cord under carpeting and do not cover cord with
throw rugs, runners or the like. Arrange cord away from traffic
area and where it will not be tripped over.
24. To disconnect the product, turn the controls to the “OFF”
position, then remove the plug from the electrical outlet.
Disconnect the plug (do not pull on the Power Cord) from the
electrical outlet.
25. Do not use attachments not recommended or sold by the
product manufacturer, as a risk of fire, electrical shock, or
serious personal injury may result.
26. Attachments, when furnished, may become hot during use.
Allow any attachments to cool before handling them.