Coway Airmega 250 Bedienungsanleitung

USER MANUALAir Puri󽗉er Airmega 250/250S

Symbols Used in This ManualThe following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety.Safety InstructionsRead and follow all the safety tips and warnings before using the product.READ AND SAVE THESE INSTRUCTIONS WARNINGWarning indicates a potentially hazardous situation that may result in death or severe injury to the user or others. CAUTIONCaution indicates a potentially hazardous situation that may result in injury to the user or others, or the loss of property. NOTENote indicates useful tips or additional information for procedures and product use.[]This square bracket represents control buttons and indicators on the product.e.g., [Power]• Do not exceed the voltage and power rating of the power outlet or connection device. This may generate excessive heat and cause electric shock or fire.• Only use the appropriate type of electric socket for the product. Connecting the product to an incorrect socket may result in damage.• Do not immerse the product or any of its parts in water. Operate the product only after a qualified technical examines and replaces the parts that were under water.• Do not touch the power plug with wet hands.• If the electric outlet is wet, do not connect the power plug of the product. Wait till the electric outlet dries completely before use.• Do not operate the product if the motor fan fails to operate or is damaged.• Disconnect the power plug from the electric outlet if strange sounds, smells, or smoke come from the product. Contact the customer service center immediately for instructions.• Disconnect the power plug from the electric outlet when the product is not in use and before cleaning, inspecting, or replacing parts.• Use a dedicated electric outlet for the product. Do not connect the product to a power strip that has connections to several other products.• Do not operate the product if the power plug or cords are damaged.• Do not forcibly bend, twist, pinch, or damage the power cord.• Do not force the power plug into an incorrect electric outlet or into a loose electric outlet. Contact a qualified technician to install a proper electric outlet.• A damaged power plug or cord must be replaced by the manufacturer or a qualified technician• Remove the power plug from the electric outlet by grasping the power plug and pulling it gently. Never pull the cord to remove the power plug. WARNING7

01BEFORE USING THE PRODUCT

Safety InstructionsRead and follow all the safety tips and warnings before using the product.• Keep the electric cord away from heat sources.• Do not repair the product unless this manual recommends it. Doing so will void your warranty. All repair work must be carried out by a qualified technician.• This product has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.• Do not use this product in industrial areas or factories where oil, grease, or dust particles may be present. This product is for household use only.• Do not change the filter while the product is operating. Always turn off the product and unplug the power plug before accessing the components inside the product.• Do not place the product near a humidifier or in humid areas, such as bathrooms or laundry rooms, where the product may come into contact with water.• Do not place the product near flammable gases, cigarettes, incense, and other combustible materials.• Do not place the product on a bed or against soft objects, such as curtains.• Do not clean the product using detergents, paint thinner, or other household solvents.• Do not spray insecticides or other flammable materials near the product.• This product should not be used by children under 8 without supervision.• This product should not be used by persons with reduced physical, sensory, or mental capabilities or lack of experience without supervision or instruction concerning to the use of the product in a safe way and understand the hazards involved.• Do not allow children to play with the plastic wrapping and product.• Do not use this product with any solid-state speed control device, as it may result in electric shock or fire.• Do not use an adapter or extension cord, as it may cause fire, shock, or personal injury.• Do not use attachments or filters not recommended by the manufacturer.• Exercise caution while removing the components from the product. Ensure that your body parts do not get stuck or scratched while servicing the product.• Do not insert any objects or finger into the openings of the product. If any objects fall into the openings, immediately turn off the product and unplug the power plug. Contact a qualified technician or the manufacturer to remove the object.• Do not wash or reuse the Max2 filter.• Do not block the air outlet of the product. Doing so may decrease the efficiency of the product and increase the risk of injury.• This product is for household use as described in this manual. Using it in an industrial environment or any other place not recommended by the manufacturer and may result in electric shock, fire, and injury to person.• Do not place anything on top of the product.• Do not run the power cord under carpets or cover it with rugs.• Change the filters at the recommended intervals so that excess dust does not accumulate.• Do not place the product where the both sides of product are blocked.• Do not place the product in direct sunlight.• Do not place the product next to or on windows.• Place the product on a firm, flat, and dry surface that provides sufficient air circulation.• Keep the product and its cord out of way, where it cannot be stepped on or tripped over.• The end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated.• Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING CAUTIONREAD AND SAVE THESE INSTRUCTIONS801BEFORE USING THE PRODUCT

Parts DiagramCheck the parts of the product (exterior in the front and top view and control panel) and how they function.ExteriorCheck the parts and functions of the exterior of the product.Air outlet coverOpen this cover when removing any fallen foreign objects and cleaning the air outlet.Control panelThese controls allow you to operate the product and monitor the current operation status.Air quality indicatorThis shows the air pollution level around the product in real time.The color changes depending on the pollution level.Front coverOpen this cover when cleaning the pollution sensor.Handles (left, right)Hold these handles to lift or transport the air purifier.Power cordPlug the end of the power cord into a power outlet (120 V~ 60 Hz).Side ViewTop View9

02PREPARATION

Parts DiagramCheck the parts of the product (exterior in the front and top view and control panel) and how they function.1002PREPARATIONControl Panel (250S)8

Air quality indicator

Power button

Mode button /indicator

Light button

Wi-Fi button /indicator

 Light sensor

Speed button / indicator

Filter reset button / indicator

Control Panel (250)8

Air quality indicator

Power button

Mode button /indicator

Light button

Timer button /indicator

 Light sensor

Speed button / indicator

Filter reset button / indicator

button/indicator1

Power buttonUse the button to turn the product on and off.- When the product operates for the first time, it is operated in the smart mode. If you turn off the product during operation and turn it on again, it is operated in the mode active before the product was turned off.3

Speed button / indicatorPress the speed button to select the level 1 → level 2 → level 3.The indicator is turned on when the speed level 1/level 2/level 3 is selected.5



Filter reset button / indicator

When the filter replacement indicator is turned on, press the corresponding button for more than 3 seconds after cleaning and replacing the filter.The indicator stays on during the filter cleaning/replacement cycle. When the cleaning cycle or life becomes less than 2%, the corresponding indicator will emit an orange color light.- If both indicators(PRE and MAX2) turn on at the same time, the filters can be reset at once.- If the filter replacement indicator is not turned on, the related button functions do not operate.- If you have replaced or repaired the filter before the filter replacement indicator was turned on, refer to page 18.- The cleaning and replacement cycle of the pre-filter and combined filter is recommended and may vary depending on the use environment.

Mode button / indicatorPress the mode button to select the smart mode → rapid mode → sleep mode.4

Light buttonUse this button to turn on and off the indicator and air quality indicator. If you press the [Light] button while all indicators and the air quality indicator are turned on, you can turn on and off the indicators in the following order: Air quality indicator off → all indicators off → all indicators on.6

Wi-Fi button / indicator(Only 250S)Touch the Wi-Fi button to connect to a Wi-Fi network.When connected to Wi-Fi, the status indicator's light will turn on.7

Light sensorThis sensor detects light around the product.8

Air quality indicatorThis indicator displays the indoor air quality in LED colors. 

Good (blue) → Moderate (green) → Unhealthy (yellow) → Very unhealthy (Red)



Timer button / indicator(Only 250)Press the timer button to set the timer.

CAUTIONMake sure that the power cord is unplugged before opening the covers.123Open the cover located at the front ofthe product.Cover ▶ Pre-filter ▶ Max2 filterRemove the plastic wrapping for Max2 filter.Discard the plastic wrapping for Max2 filter.Return the filter and cover in reverse order at the first step. Max2 filter ▶ Pre-filter ▶ Cover CAUTION• When removing the plastic wrapping from the filter, be careful not to damage the surface of filter.• Do not allow children to play with the plastic wrapping. NOTE• Place the Max2 filter into the filter case with the green side facing the product. Reversed placement may affect the filter lifetime.• The product will not turn on If the cover is installed in correctly.

FRONT/전면/前

12Setting Up the ProductBefore using the product, you must remove the plastic wrapping of the inserted Max2 filter.03INSTALLATION

12Insert the power plug into a power outlet.The indicators on the air purifier will blink.Touch the [Power] button to turn the air purifier on.You will hear a chime sound when the air purifier starts to operate. CAUTION• Do not touch the control panel while connecting the power.• Buttons may not work for a certain period of time.• If the buttons do not work, unplug the power cord for about 10 minutes to discharge, and then connect it again. CAUTIONThis product is for 120 V~ 60 Hz use only. Make sure your power supply meets these requirements.13

Connecting the Power and Turning On the Air PurifierWhen your filters are prepared, connect the power and turn on the air purifier.Connecting the Air Purifier to the Wi-Fi Network (250S Only)Find out the application pairing guide with the link provided below : https://iocare.coway.com/manual/us/air/airmega250s.html

Press the [Mode] button to select the smart mode.Press the [Mode] button to select the sleep mode. This mode minimizes thespeed during operation for a quiet and pleasant environment.Smart Mode - Sleep If the product is set to Smart mode, Sleep mode is activated automatically, so that it can reduce noise and power consumption. It activates when the room is dark and the air quality is Good(Level 1) for 3 minutes.If the light sensor detects light for 5 minutes or longer and/or if the air quality level in the room is Moderate(Level 2) or worse. The Smart mode will activate automatically.250S/2501404OPERATIONSmart Mode - Auto If the product is set to Smart mode, it automatically adjusts the air speed according to the current air quality around the product. The air speed is adjusted as shown in the table below:Air QualityGoodModerate/unhealthyVery unhealthyAir SpeedLevel 1Level 2Level 3250S/250

250S/250250S25015

Smart Mode - ECOWhen set to Smart Mode, if the pollution level remains Good(Level 1) for more than 10 minutes, the fan stops automatically to conserve energy. If the product detects air pollution, the fan will automatically restart again.If the pollution level remains Good(Level 1) for more than 10 minutes in smart mode, the fan stops automatically to save energy. If the product detects air pollution, the fan will automatically restart. Also, if the ECO mode maintains for 30 minutes, the fan will restart as well. If the pollution level remains Good for more than 10 minutes after restarting, the ECO mode will be activated again.Setting the TimerYou can set the product to automatically turn off after an hour, 4 hours, or 8 hours. Use this feature to save energy when you leave home or go to bed.Rapid ModePress the [Mode] button to select rapid mode. When the air quality is maintained at level 1 for more than 5 minutes, it is switched to the smart mode. When the product continues to operate for more than a maximum of 60 minutes, it is switched to the smart mode.- The maximum fan speed in the rapid mode is the same as level 3.Fresh AirEnter Eco ModeDetecting Air PollutionFor 250S users, you can set the timer and scheduler using Airmega application.Touch the [Timer] button until the indicator light displays the desired time.

Andere Handbücher für Airmega 250

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis