CP Plus ORANGE CP-UVK-701A Bedienungsanleitung
Analog 4-Wire Video Intercom
Quick Start Guide
Version 1.0.1
Foreword
General
This document mainly introduces structure, installation, wiring and menu operations of the analog 4-wire
video intercom.
Model
CP-UVK-701A, CP-UVK-701MTA
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words
Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or unpredictable
result.
TIPS
Provides methods to help you solve a problem or save you time.
NOTE
Provides additional information as the emphasis and supplement to
the text.
About the Manual
•The manual is for reference only. If there is inconsistency between the manual and the actual product,
the actual product shall prevail.
•We are not liable for any loss caused by the operations that do not comply with the manual.
•The manual would be updated according to the latest laws and regulations of related jurisdictions. For
detailed information, refer to the paper manual, CD-ROM, QR code or our official website. If there is
inconsistency between paper manual and the electronic version, the electronic version shall prevail.
•All the designs and software are subject to change without prior written notice. The product updates
might cause some differences between the actual product and the manual. Please contact the
customer service for the latest program and supplementary documentation.
•There still might be deviation in technical data, functions and operations description, or errors in print.
If there is any doubt or dispute, we reserve the right of final explanation.
•Upgrade the reader software or try other mainstream reader software if the manual (in PDF format)
cannot be opened.
•All trademarks, registered trademarks and the company names in the manual are the properties of
their respective owners.
•Please visit our website, contact the supplier or customer service if there is any problem occurring
when using the device.
•If there is any uncertainty or controversy, we reserve the right of final explanation.
Important Safeguards and Warnings
The following description is the correct application method of the device. Please read the manual carefully
before use, in order to prevent danger and property loss. Strictly conform to the manual during application
and keep it properly after reading.
Operating Requirements
•Do not expose the device to direct sunlight or heat source.
•Do not install the device in a humid or dusty area.
•Install the device horizontally at stable places to prevent it from falling.
•Do not drip or splash liquids onto the device; do not put on the device anything filled with liquids.
•Install the device at well-ventilated places and do not block its ventilation opening.
•Use the device only within rated input and output range.
•Do not dismantle the device by yourself.
•The device should be used with screened network cables.
Power Requirements
•Use recommended power cables in the region under their rated specification.
•Use power supply that meets SELV (safety extra low voltage) requirements, and supply power with
rated voltage that conforms to Limited Power Source in IEC60950-1. For specific power supply
requirements, please refer to device labels.
•Appliance coupler is a disconnecting device. During normal use, please keep an angle that facilitates
operation.
Device Update
Do not cut off power supply during device update. Power supply can be cut off only after the device has
completed update and has restarted.
Table of Contents
1. Structure .................................................................................................................................................. 5
1.1. Introduction....................................................................................................................................... 5
1.2. Features............................................................................................................................................. 5
1.3. Front Panel ........................................................................................................................................ 6
1.4. Rear Panel.......................................................................................................................................... 7
2. Installation................................................................................................................................................ 8
2.1. INDOOR ............................................................................................................................................. 8
2.2. OUTDOOR.......................................................................................................................................... 8
3. Wiring....................................................................................................................................................... 9
3.1. Preparations .................................................................................................................................... 10
3.1.1. Port Connection Rules ............................................................................................................... 10
3.1.2. Cord Specification...................................................................................................................... 10
3.2. Wiring One OUTDOOR and One INDOOR.......................................................................................... 11
3.3. Wiring Three OUTDOORs and One INDOOR...................................................................................... 12
3.4. Wiring Two OUTDOORs and Three INDOORs.................................................................................... 13
4. Menu Operations.................................................................................................................................... 13
4.1. Snapshots ........................................................................................................................................ 14
4.1.1. Taking Snapshots....................................................................................................................... 14
4.1.2. Viewing Snapshots..................................................................................................................... 15
4.2. Time ................................................................................................................................................ 16
4.3. Restoring to Default Settings............................................................................................................ 16
5. Appendix 1: Cybersecurity Recommendations ........................................................................................ 17
1. Structure
1.1. Introduction
The analog 4-wire video intercom consists of a door station ("OUTDOOR") and an indoor monitor ("INDOOR").
It is applicable to buildings, such as residential buildings, for people to do voice and video calls. The OUTDOOR
is installed outdoors, and INDOOR is installed indoors.
1.2. Features
INDOOR
•Real-time video/voice communication
•Can be connected to three OUTDOORs
•Can be connected to cameras (CVBS)
•Plug-and-play
OUTDOOR
•Real-time voice communication
•Self-adaptive IR illumination
1.3. Front Panel
No.
Icon
Description
1
–
Microphone.
2
•Press to hang up the incoming call.
•Take snapshots during monitoring (only supported by INDOOR1020J-T).
3
Wake up the screen, and bring up the menu.
For how to operate the menu, see "Error! Reference source not found. Error!
Re
ference source not found.".
4
When someone is calling from the OUTDOOR:
•Press once to do voice communication with the person.
•Press twice quickly to hang up.
5
When someone is calling from the OUTDOOR:
•Press to talk to the person (only supported by INDOOR1020J).
•Press to take snapshots (only supported by INDOOR1020J-T).
When no one is calling:
•Press once, twice, three times and four times to view live video of:
OUTDOOR1, OUTDOOR2, analog camera 1 and analog camera 2
respectively.
•On any live video, press to take snapshots (only supported by
INDOOR1020J-T).
6
When someone is calling, press to open the door where the OUTDOOR is
installed.
7
–
Power indicator.
8
–
LCD screen.
9
–
Microphone.
10
–
Built-in camera.
11
–
Power indicator.
12
–
•Call button.
•Press once to call the INDOOR.
•Press and hold for 10 seconds to change the bell type of the OUTDOOR.
The power indicator will flash.
•Press and hold for 15 seconds to turn up the bell volume of the
OUTDOOR. The power indicator will flash. When the volume reaches
maximum, this step will set it to minimum. Repeat this step to set
appropriate volume.
•Press and hold for 20 seconds to change to DWDR (digital wide dynamic
range)/normal mode for the OUTDOOR. The power indicator will flash.
13
–
Speaker.
1.4. Rear Panel
No.
Description
No.
Description
1
Analog camera port 1.
6
INDOOR cascading port 1.
2
OUTDOOR port 1.
7
INDOOR cascading port 2.
3
OUTDOOR port 2.
8
OUTDOOR hanging slot.
4
Power input.
9
Wires.
5
Analog camera port 2.
–
–
2. Installation
2.1. INDOOR
Fix the bracket on the wall by screws, hang the INDOOR on the bracket, and then apply silicone sealant to the
gap between the device and the wall.
2.2. OUTDOOR
Install the OUTDOOR bracket on the wall, and then hang the OUTDOOR on the bracket; or install the OUTDOOR
cover on the wall, and then hang the OUTDOOR on the cover. Finally, apply silicone sealant to the gap between
the device and the wall.
3. Wiring
At most 2 OUTDOORs and 3 INDOORs can be wired in one communication system.
3.1. Preparations
3.1.1. Port Connection Rules
•Port A of a INDOOR can be connected to Port C of another INDOOR to do data communication.
•Port B of a INDOOR can be connected to Port D of another INDOOR to do data communication.
•Port A of a INDOOR cannot be connected to Port B or D of another INDOOR to do data communication.
•Port C of a INDOOR cannot be connected to Port B or D of another INDOOR to do data communication
3.1.2. Cord Specification
Depending on the distance between the OUTDOOR and INDOOR, you need to select RVV4 cords of different
specifications.
Transmission Distance (TD)
RVV4 Cord Specification
TD ≤ 10 m
RVV4 × 0.3 mm²
10 m < TD ≤ 30 m
RVV4 × 0.5 mm²
30 m < TD ≤ 50 m
RVV4 × 0.75 mm²
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CP Plus Gegensprechanlage Handbücher
