Cradlepoint IBR1700 Bedienungsanleitung

11/2/2020 COR IBR1700 Mobile Router Quick Start Guide

https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started 1/6

COR IBR1700 Mobile Router Quick Start Guide

Jun 23, 2020 •Knowledge

Content

IBR1700 Mobile Router Quick Start Guide

Introduction

This guide provides instructions for the basic set up of your COR IBR1700 mobile router as well as discusses what's inside the box and optional accessories

to enhance the router's functionality. For instructions on installing the router in your vehicle, refer to the Vehicle Installation Guide for COR Series Mobile

Routers (https://customer.cradlepoint.com/s/article/Vehicle-Installation-Guide-for-COR-Series-Mobile-Routers) or email our Professional Installer Network to

locate a professional installer in your service area at [email protected] (mailto: [email protected]).

Navigation

What’s in the Box

Hardware

Accessories

Required

Optional

Before You Begin

Location Considerations

SIM Card for Wireless Connectivity

Setup

Understanding LEDs

Connecting to NetCloud

Troubleshooting

Resources

Help and Support

COR IBR1700 Series Mobile Router Models

What's in the Box

IBR1700 high-performance, hardened metal router with embedded, business-class 3G/4G modem; includes integrated mounting plate

DC GPIO/power cable

Safety, Regulatory, and Warranty guide

Hardware

Caption

Search (Knowledge Base, Forums, Cases)

Home (/s/) TECHNICAL SUPPORT (/s/contactsupport) FORUMS (/s/forums) TRAINING (/s/cpu) NETCLOUD (/s/NetCloud)

11/2/2020 COR IBR1700 Mobile Router Quick Start Guide

https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started 2/6

Accessories

The IBR1700 series mobile routers are designed for installation in vehicles and therefore require additional accessories for optimal performance.

For antennas, refer to the Cradlepoint Approved Antennas information on the Cradlepoint Antennas

(https://cradlepoint.com/products/antennas/) webpage.

For accessories, refer to the Cradlepoint Accessories webpage (https://cradlepoint.com/products/accessories/).

Required

Antennas and associated cables will need to be purchased separately. Refer to the webpage for more information.

Optional

Refer to the Accessories (https://cradlepoint.com/products/accessories/) page on the Cradlepoint website to learn more about optional accessories for

enhancing the IBR1700 series router. These optional accessories include:

COR Extensibility dock

2x10 GPIO cable

Secondary MC400 LTE modem

Barrel to 4-pin power adapter

Extended temperature AC power supply

Before You Begin

Read through the following before you set up your Cradlepoint COR IBR1700 router(s).

Location Considerations

The IBR1700 series routers are built for installation in vehicles of all varieties. Refer to the Vehicle Installation Guide for COR Series Mobile Routers

(https://customer.cradlepoint.com/s/article/Vehicle-Installation-Guide-for-COR-Series-Mobile-Routers) for more information.

SIM Card for Wireless Connectivity

A wireless broadband data plan must be added to your Cradlepoint IBR1700 for wireless broadband connectivity. Wireless broadband data plans are

available from wireless carriers such as Verizon, AT&T, Sprint, EE, and Vodafone. The SIM must be provisioned by the carrier. Contact your carrier for details

about selecting a data plan and about the process for provisioning your SIM. To configure the router for failover and failback functionality, refer to the article,

Effectively Utilizing 2-SIM Modems (https://customer.cradlepoint.com/s/article/NCOS-Effectively-utilizing-2-SIM-modems).

Setup

Read through the following to set up your IBR1700 series mobile router.

1. Insert an activated 2FF-sized SIM into the router.

11/2/2020 COR IBR1700 Mobile Router Quick Start Guide

https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started 3/6

Unscrew and remove the MC400 modular modem door from the router.

Insert the card into the SIM1 slot, metal contacts up and notch in. It will click into place. Depress again to remove.

Insert the secondary SIM card into the SIM2 slot if desired.

2. If using a MC400 modular modem, insert activated 2FF-sized SIM card(s) into the modem.

Insert the card into the SIM1 slot, metal contacts down and notch in.

Insert the secondary SIM into the SIM2 slot, if desired.

Slide the MC400 modular modem into the IBR1700, Cradlepoint logo side up, USB plug first.

Replace the modem door and secure with the screws.

Remove the plastic port covers from the modem door before returning the cover to the router.

Note: The MODEM COVER must be replaced, or the modem will not power on.

3. Set up the Antenna and WiFi Configuration.

The IBR1700 includes three (3) independent WiFi radios, allowing for a much more customizable and robust experience when using WiFi. For more

information on configuring and using the IBR1700's WiFi, please view this article: NCOS: 6.5 IBR1700 WiFi Radio Setup (/s/article/NCOS-6-5-IBR1700-

WiFi-Radio-Setup?r=110&ui-knowledge-components-aura-

actions.KnowledgeArticleVersionCreateDraftFromOnlineAction.createDraftFromOnlineArticle=1).

There are many antennas options for the IBR1700. Refer to the Vehicle Installation Guide for COR Series Mobile Routers

(https://customer.cradlepoint.com/s/article/Vehicle-Installation-Guide-for-COR-Series-Mobile-Routers) for information about selecting an antenna option

that works best for you.

4. Connect the power source.

The 4-pin power/GPIO cable connects directly to the router and is intended for connecting to a DC power source. Refer to the following for pin

configuration to ensure the cables are connected appropriately:

PIN Wire Color Definition Details

1 Black Ground Ground to the vehicle chassis

2 Red Power VDC battery constant

3 Orange Input VDC ignition sensing accessory input

4 Blue Output General purpose I/O (GPIO)

5. Activate the device through NetCloud Manager.

Refer to the Connecting to NetCloud (https://cradlepoint.lightning.force.com/lightning/r/Knowledge__kav/ka9380000004EVvAAM/view#NetCloud) section

of this document.

Return to Top

11/2/2020 COR IBR1700 Mobile Router Quick Start Guide

https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started 4/6

Understanding LEDs

INDICATOR BEHAVIOR

POWER: The Cradlepoint IBR1700 must be powered using an approved 9–36 V DC power source.

Green = Powered ON

Yellow = Attention is required

No Light = Not receiving power. Check the power source connection

GPS: Indicates the status of GPS connection.

Blue = GPS locked

Blinking Blue = Obtaining lock

No Light = Off/no lock

MC400 MODEM: Indicates information about the optional MC400 modem.

Green = Modem has established an active connection

Blinking Green = Modem is connecting

Amber = Modem is not active

Blinking Amber = Data connection error. No modem connection possible

Blinking Red = Modem is in the process of resetting

No Light = Modem not connected

INTEGRATED MODEM Indicates information about the integrated modem.

Green = Modem has established an active connection

Blinking Green = Modem is connecting

Amber = Modem is not active

Blinking Amber = Data connection error. No modem connection possible

Blinking Red = Modem is in the process of resetting

Blinking Red with Signal Strength LEDs = SIM door is not installed, modem is off

No Light = Modem not connected

SIGNAL STRENGTH Blue LED bars indicate the active modem’s signal strength.

4 Solid Bars = Strongest signal

1 Blinking Bar = Weakest signal (a blinking bar indicates half of a bar)

4 Blinking Bars = SIM door is open and the modem is powered off

WiFi STATUS: Indicates information about WiFi channels.

2.4 GHz Green = Activity on 2.4 GHz WiFi band

5 GHz Blue = Activity on 5 GHz WiFi band

WiFi AS WAN: Indicates WiFi as WAN status.

White = WiFi as WAN active

Other

ADDITIONAL LED INDICATIONS

Several different LEDs blink when the factory reset button is detected

Two of the modem LEDs blink red in unison for 10 seconds when there is an error during NCOS upgrade

When an external USB modem is plugged in, only the Signal Strength LEDs will light up

Return to Top

Connecting to NetCloud

Activate your device through NetCloud Manager (NCM). Your device is packaged with NetCloud services, and activation requires that you log into your

NetCloud account. Refer to the following for more information:

11/2/2020 COR IBR1700 Mobile Router Quick Start Guide

https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started 5/6

Vehicle Installation Guide for COR Series Mobile Routers (/s/article/Vehicle-Installation-Guide-for-COR-Series-Mobile-Routers) 12.07K

NCOS: VPN Quick Start Guide for Capable Cradlepoint Products (/s/article/NCOS-VPN-Quick-Start-Guide-for-capable-Cradlepoint-products) 37.18K

IBR900 Mobile Router Quick Start Guide (/s/article/IBR900-Getting-Started) 24.61K

(/ / ti l /Q i k St t G id )

Getting Started with NetCloud Manager (https://customer.cradlepoint.com/s/article/Getting-Started-with-NetCloud-Manager?ui-force-components-controllers-

recordGlobalValueProvider.RecordGvp.getRecord=1&r=82&ui-knowledge-components-aura-

actions.KnowledgeArticleVersionCreateDraftFromOnlineAction.createDraftFromOnlineArticle=1)

Troubleshooting

If the device takes longer than 5 minutes to connect to the Internet, you may need to log into the local UI of the device to make configuration changes or start

the troubleshooting process. You must be physically co-located with the device in order to do this. Refer to the following document for more information:

How to Troubleshoot Connection Issues (/s/article/NCOS-No-Internet-or-Connection-Issues?r=47&ui-knowledge-components-aura-

actions.KnowledgeArticleVersionCreateDraftFromOnlineAction.createDraftFromOnlineArticle=1)

Once the device connects to the Internet, it should then connect to your NetCloud Manager account and start its configuration download.

Resources

IBR1700 Webpage (https://cradlepoint.com/product/endpoints/ibr1700/)

IBR1700 Spec Sheet (https://resources.cradlepoint.com/product-resources/spec-sheet-cor-ibr1700)

Getting Started with Ignition Sensing (https://customer.cradlepoint.com/s/article/Getting-Started-With-Ignition-Sensing)

Help and Support

Cradlepoint Customer Connect Community (https://customer.cradlepoint.com/s/)

Cradlepoint Support (https://cradlepoint.com/support/)

COR IBR1700 Mobile Router Models

This guide applies to the following COR IBR1700 Mobile router models.

CRADLEPOINT IBR1700-1200M-B S5A844A

CRADLEPOINT IBR1700-1200M S5A844A

CRADLEPOINT IBR1700-600M S5A741A

Cradlepoint Terms of Service & License Agreement (https://cradlepoint.com/about-us/terms-of-service/)

Return to Top

Title

COR IBR1700 Mobile Router Quick Start Guide

URL Name

IBR1700-Getting-Started

No related lists to display

Ask a Question

11/2/2020 COR IBR1700 Mobile Router Quick Start Guide

https://customer.cradlepoint.com/s/article/IBR1700-Getting-Started 6/6

Quick Start Guide Index (/s/article/Quick-Start-Guides) 1.54K

Getting Started With Ignition Sensing (/s/article/Getting-Started-With-Ignition-Sensing) 12.63K

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung