Craftsman 320.17217 Bedienungsanleitung

Operator's Manual

j CRRFTSMRH°j

evolv M

3/8" Keyless Drill

Model No. 320.17217

000s

WARNING: To reduce the risk of

injury, the user must read and

understand the Operator's Manual

before using this product.

• WARRANTY

SAFETY

ASSEMBLY

DESCRIPTION

OPERATION

MAINTENANCE

Sears Brands Management Corporation

www.craftsman.com

Warranty Page2

SafetySymbols Page3

SafetyInstructions Pages4-7

Unpacking Pages8

Description Pages8-10

Operation Pages10-13

Maintenance Page14

Troubleshooting Page15

PartsList Pages16-17

SearsRepairPartsPhoneNumber BackCover

CRAFTSMAN@ EVOLV FULL WARRANTY

If this Craftsman@ Evolv product fails due to a defect in material or

workmanship within one year from the date of purchase, return it to any

Sears store or other Craftsman@ Evolv outlet in the United States for free

replacement.

This warranty is void if this product is ever used for commercial or rental

purposes.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

AWARNING: Some dust created by using power tools contains chemicals

known to the state of California to cause cancer and birth defects or other

reproductive harm.

SAVE THESE INSTRUCIONS!

READ ALL iNSTRUCTiONS!

17217 Manual Revised 09-0708 Page 2

The purpose of safety symbols is to attract your attention to possible dangers.

The safety symbols and the explanations with them deserve your careful

attention and understanding. The symbol warnings do not, by themselves,

eliminate any danger. The instructions and warnings they give are no substitutes

for proper accident prevention measures.

,_ WARNING: Be sure to read and understand all safety instructions in this

manual, including all safety alert symbols, such as "DANGER," "WARNING,"

and "CAUTION," before using this keyless drill. Failure to following all

instructions listed below may result in electric shock, fire and/or serious personal

injury.

SYMBOL MEANNING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

,_ DANGER: Failure to obey this safety warning will result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the

risk of fire, electric shock, and personal injury.

,_ WARNING: Failure to obey this safety warning can result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the

risk of fire, electric shock, and personal injury.

,_ CAUTION: Failure to obey this safety warning may result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the

risk of fire, electric, shock and personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES

These inform user of important information and/or instructions that could lead to

equipment or other property damage if not followed. Each message is preceded

by the word "NOTE" as in the example below.

NOTE: Equipment and/or property damage may result if these instructions are

not followed.

The operation of any power tool can result in foreign

objects being thrown into your eyes, which can result

in severe eye damage. Before beginning power tool

operation, always wear safety goggles or safety glasses

with side shields and a full-face shield when needed.

We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields,

available at Sears Stores or other Craftsman outlets.

Always use eye protection that is marked to comply with

ANSI Z87.1

17217 Manual Revised 09-0708 Page 3

WARNING: Be sure to read and understand all instructions in this manual

before using the drill. Failure to follow all instructions may result in hazardous

radiation exposure, electric shock, fire, and/or serious personal injury.

WARNING: Do not attempt to operate this tool until you have thoroughly

read all instructions, safety rules, and warnings. Failure to comply with them can

result in fire, electric shock, or serious personal injury. Save the manual and refer

to it frequently.

GENERALSAETYPRECAUTIONS

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distractions cause you to lose control.

ELECTRICAL SAFETY

Double insulated tools are equipped with a polarized plug (one blade

is wider than the other.) This plug will fit in a

polarized outlet only one way. if the plug does not

fit fully in the outlet, reverse the plug. if it still does

not fit, contact a qualified electrician to install a

polarized outlet. Do not change the plug in any

way. Double insulation eliminates the need for the

three wire grounded power cord and grounded power

supply system.

Avoid body contact with grounded surfaces such

as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is

grounded.

Do not abuse the cord. Never use the cord to carry the tools or pull

the plug from an ouUet. Keep cord away from heat, oil, sharp edges or

moving parts. Replace damaged cords immediately. Damaged cords

increase the risk of electric shock.

= When operating a power tool outside, use an outdoor extension cord

marked "W-A" or "W". These cords are rated for outdoor use and reduce

the risk of electric shock. The following table shows the correct size to

use, depending on cord length and nameplate amperage rating of the tool.

17217 Manual Revised 09-0708 Page 4

Don't expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

Whenindoubt,usethenextheaviergauge.AlwaysuseULandCSAlisted

extensioncords.

Recommended sizes of extension cords

Ampere Rating

More Than

Not More Than

Volts

120v

Total Length of Cord in feet

25ft 50ft 100ft 150ft

AWG

18 16

16 16

14 12

16 14

14 12

Not Recommended

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off before plugging in.

Carrying tools with your finger on the switch or plugging in tools that have

the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench

or a key that is left attached to a rotating part of the tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper

footing and balance enables better control of the tool in unexpected

situations.

=Use safety equipment. Always wear eye protection. Dust mask, non-skid

safety shoes, hard hat, or hearing protection must be used for appropriate

conditions.

Before connecting the tool to a power source (receptacle, outlet, etc.},

be sure voltage supplied is the same as that specified on the nameplate

of the tool. A power source with voltage greater than that specified for the

tool can result in serious injury to the user - as well as damage to the tool.

TOOL USEAND CARE

•Use clamps or other practical way to secure and support the workpiece

to a stable platform. Holding the work by hand or against your body is

17217 Manual Revised 09-0708 Page 5

unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct

tool will do the job better and more safely at the rate for which is designed.

Do not use tool if the switch does not turn it on or off. Any tool that

cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing the tool. Such preventive

safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons.

Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools, with sharp cutting edges are less likely to bind and are

easier to control.

Check for misalignment or binding of moving parts, breakage of parts,

and any other condition that may affect the tools operation, if damaged,

have the tool serviced before using. Many accidents are caused by poorly

maintained tools.

•Use only accessories that are recommended by the manufacturer for

your model. Accessories that may be suitable for one tool, may become

hazardous when used on another tool.

* Do not alter or misuse tool. These tools are precision built. Any alteration or

modification not specified is misuse and may result in a dangerous condition.

SERVICE

Tool service must be performed only by qualified repair personnel.

Service or maintenance performed by unqualified personnel could result in a

risk of injury.

When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure to follow Maintenance instructions may create a

risk of shock or injury.

17217 Manual Revised 09-0708 Page 6

SAFETY SYMBOLS FOR YOUR TOOL

The label on your tool may include the following symbols.

V............................................................... Volts

A............................................................... Amps

Hz............................................................. Hertz

W .............................................................. Watts

min ........................................................... Minutes

rXj ........................................................... Alternating Current

.......................................................... Direct Current

no ........................................................... No-load Speed

[] .............................................................. Class II construction

.../min ....................................................... Revolutions or Strokes per minute

A_, ........................................................... Indicates danger, warning caution.

It means attention! Your safety is

involved.

SPECiFiC SAFETY RULES FOR DRILL

,_ DANGER: Keep hands away from drilling area and drill bit. Do not reach

under the material being drilled.

Always keep your body positioned to either side of the drill, but not in line with

the drill bit.

• Do not reach underneath the work.

• Always clamp workpiece before drilling. Never hold a workpiece in your hand

or legs. Small or thin material may flex or vibrate with the drill bit, causing

loss of control.

Never touch the drill bit after use. It may be hot after prolonged use.

Always hold tool by insulated gripping surfaces when performing an

operation where the tool may contact hidden wiring or its own cord. Contact

with a "live" wire will make the exposed metal parts of the tool "live" and

shock the operator.

Always use drill bits that are of a correct size and shape. Drill bits that do not

fit the chuck jaws of the electric drill will perform erratically and will cause

loss of control.

• Always be sure that all chuck adjustments have been made and that the drill

bit is fastened tightly before drilling. Loose drill can cause the tool to slip, and

loss of control may result.

WARNING: To reduce the risk of injury, user must read instruction manual.

17217 Manual Revised 09-0708 Page 7

_1_ WARNING: Your drill should never be connected to the power source

when you are assembling parts, making adjustments, installing or removing

bits, cleaning it, or when it is not in use. Disconnecting the drill will prevent

accidental starting, which could cause serious personal injury.

When unpacking the box, do not discard any packing materials until all of the

contents are accounted for:

1. Carefully lift the drill out of the carton and place it on a stable, flat surface.

2. Open the color box to locate the following:

* 1 drill

* Operator's manual

3. Inspect the items carefully to make sure that no breakage or damage has

occurred during shipping. If any of the items mentioned is missing, (refer

to "PARTS LIST" illustration), return the drill to your nearest Sears store or

Craftsman outlet to have the drill replaced.Carefully remove the tool and any

accessories from the box. Make sure that all items listed in the packing list

are included.

,_ WARNING: If any part is broken or missing, do not attempt to assemble the

drill, plug in the power cord, or operate the drill until the broken or missing part

has been replaced. Failure to do so could result in possible serious injury.

CARTON CONTENTS/LOOSE PARTS (Fig. 1)

Fig. 1

Drill

KNOW YOUR DRILL (Fig.2)

Before attempting to use this drill, familiarize yourself with all its operating

features and safety requirements.

_1_ WARNING: Do not allow familiarity with your drill to make you careless.

Remember that a careless fraction of a second is sufficient to inflict severe

injury.

17217 Manual Revised 09-0708 Page 8

Fig. 2

Built-in belt chip Lock-on button

Cord guard

Keyless chuck

Trigger switc

Forward/reverse

switch

PRODUCT SPECIFICATIONS

Motor 120V~60Hz, 5.2A

No Load Speed 0-2500 (RPM)

Chuck 3/8" (10ram)

Cord length 6'

Weight 3.1 Ibs

WARNING: The safe use of this product requires an understanding of the

information on the tool and in this operator's manual as well as knowledge of the

project you are attempting. Before use of this product, familiarize yourself with

all operating features and safety rules.

VARIABLE=SPEEDTRIGGER SWITCH

To start the drill, press the trigger switch. To stop the drill, release the trigger

switch.

The variable-speed trigger switch delivers higher speed with increased trigger

pressure and lower speed with decreased trigger pressure.

LOCK=ON BUTTON

Squeeze the trigger switch and depress the "Lock-on" button.

FORWARD/REVERSE SWITCH

To use the drill in the forward position, push the switch to the left. To use the drill

in the reverse position, push the switch to the right.

KEYLESS CHUCK

For quick and easy bit changes.

17217 Manual Revised 09-0708 Page 9

CORD GUARD

Protects the cord from bending to prevent damage.

BUILT-IN BELT CLiP

Conveniently hooks onto your tool belt for carrying the drill.

NOTE: Make sure the plug has been removed from power supply and drill bits

have been removed from drill. Your drill comes equipped with variable speeds,

which can be adjusted by using the 2-finger trigger switch.

• Low-speed range for drilling in hard materials such as steel

• High-speed range for drilling in soft materials

WARNING: Disconnect the tool from the power supply before installing or

removing a drill bit.

CAUTION: To prevent gear damage, always allow the chuck to come to a

complete stop before changing the direction of rotation.

WARNING: Always wear safety goggles or safety glasses with side shields

when operating your electric drill. Failure to do so could result in foreign objects

being thrown into your eyes resulting in possible serious eye damage.

WARNING: Always wear an appropriate dust mask and hearing protection

when using your electric drill.

WARNING: Clamp or otherwise secure your workpiece to prevent it from

moving under the drill while being drilled. An unsecured workpiece could be

thrown toward the operator causing injury.

FORWARD/REVERSE SWITCH (Fig. 3)

Your drill is reversible. The

forward/reverse switch is

conveniently mounted above

the trigger switch.

To make the drill rotate

clockwise (for drilling), push the

forward/reverse switch to the

left.

To make the drill rotate

counterclockwise to remove

screws, push the forward/

reverse switch to the right.

Note: Never change position of

17217 Manual Revised 09-0708 Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Craftsman Bohren Handbücher

Craftsman

Craftsman 320.10320 Bedienungsanleitung

Craftsman

Craftsman 315.262520 Bedienungsanleitung

Craftsman

Craftsman 315.115760 Bedienungsanleitung

Craftsman

Craftsman 315.274790 Bedienungsanleitung

Craftsman

Craftsman 315.101160 Bedienungsanleitung

Craftsman

Craftsman 973.274960 Bedienungsanleitung

Craftsman

Craftsman 315.DD2010 Bedienungsanleitung

Craftsman

Craftsman CMCK210C2 Bedienungsanleitung

Craftsman

Craftsman 315.114540 Bedienungsanleitung

Craftsman

Craftsman 315.105050 Bedienungsanleitung

Craftsman

Craftsman 351.229000 Bedienungsanleitung

Craftsman

Craftsman 315.115410 Bedienungsanleitung

Craftsman

Craftsman 172.28129 Bedienungsanleitung

Craftsman

Craftsman CMCD720 Bedienungsanleitung

Craftsman

Craftsman 315.111720 Bedienungsanleitung

Craftsman

Craftsman 11543 - C3 19.2 Volt Cordless Hammer Bedienungsanleitung

Craftsman

Craftsman 320.17592 Bedienungsanleitung

Craftsman

Craftsman CMCD711 Bedienungsanleitung

Craftsman

Craftsman 315.113861 Bedienungsanleitung

Craftsman

Craftsman 26302 - Professional 20 Volt Lithium-Ion Bedienungsanleitung

Craftsman

Craftsman 315.HD2000 Bedienungsanleitung

Craftsman

Craftsman 973.111620 Bedienungsanleitung

Craftsman

Craftsman 315.111270 Bedienungsanleitung

Craftsman

Craftsman 315.10136 Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung

Bosch

Bosch GSB 21-2 Bedienungsanleitung