Craftsman Evolv 320.17263 Bedienungsanleitung

Operator's Manual

ICRRFTSMRN°I

evolv

Hammer Drill

Model No. 320.17263

WARNING: To reduce the risk of

injury, the user must read and

understand the Operator's Manual

before using this product.

•WARRANTY

• SAFETY

• ASSEMBLY

• DESCRIPTION

• OPERATION

• MAINTENANCE

Sears Brands Management Corporation

www.craftsman.com

Warranty Page 2

Safety Symbols Page 3

Safety Instructions Page 4-7

Unpacking Page 8

Description Page 9-10

Operation Page 10-14

Maintenance Page 15

Troubleshooting Page 16

Parts List Page 17-19

Sears Repair Parts Phone Number Back Cover

CRAFTSMAN® EVOLV FULL WARRANTY

If this Craftsman@ Evolv product fails due to a defect in material or

workmanship within one year from the date of purchase, return it to any

Sears store or other Craftsman@ Evolv outlet in the United States for free

replacement.

This warranty is void if this product is ever used for commercial or rental

purposes.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

AWARNING: Some dust created by using power tools contains chemicals

known to the state of California to cause cancer and birth defects or other

reproductive harm.

SAVE THESE INSTRUCIONS!

READ ALL INSTRUCTIONS!

17263Manual Revised 09-0709 Page 2

The purpose of safety symbols is to attract your attention to possible dangers.

The safety symbols and the explanations with them deserve your careful

attention and understanding. The symbol warnings do not, by themselves,

eliminate any danger. The instructions and warnings they give are no substitutes

for proper accident prevention measures.

_, WARNING: Be sure to read and understand all safety instructions in this

manual, including all safety alert symbols, such as "DANGER," "WARNING,"

and "CAUTION," before using this keyless drill. Failure to following all

instructions listed below may result in electric shock, fire and/or serious personal

injury.

SYMBOL MEANNING

_, SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

_, DANGER: Failure to obey this safety warning will result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the

risk of fire, electric shock, and personal injury.

_, WARNING: Failure to obey this safety warning can result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the

risk of fire, electric shock, and personal injury.

_lk CAUTION: Failure to obey this safety warning may result in death or serious

injury to yourself or to others. Always follow the safety precautions to reduce the

risk of fire, electric, shock and personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES

These inform user of important information and/or instructions that could lead to

equipment or other property damage if not followed. Each message is preceded

by the word "NOTE" as in the example below.

NOTE: Equipment and/or property damage may result if these instructions are

not followed.

WEAR YOUR

The operation of any power tool can result in foreign

objects being thrown into your eyes, which can result

in severe eye damage. Before beginning power tool

operation, always wear safety goggles or safety glasses

with side shields and a full-face shield when needed.

We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields,

available at Sears Stores or other Craftsman outlets.

Always use eye protection that is marked to comply with

ANSI Z87.1

17263 Manual Revised 09-0709 Page 3

A_, WARNING: Be sure to read and understand all instructions in this manual

before using the hammer drill. Failure to follow all instructions may result in

hazardous radiation exposure, electric shock, fire, and/or serious personal injury.

_, WARNING: Do not attempt to operate this tool until you have thoroughly

read all instructions, safety rules, and warnings. Failure to comply with them can

result in fire, electric shock, or serious personal injury. Save the manual and refer

to it frequently.

GENERALSAETYPRECAUTIONS

WORK AREA SAFETY

•Keep work area clean and well lit. Cluttered or dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

•Keep children and bystanders away while operating a power tool.

Distractions cause you to lose control.

ELECTRICAL SAFETY

Double insulated tools are equipped with a polarized plug (one blade is

wider than the other.) This plug will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician to install a polarized outlet. Do not

change the plug in any way. Double insulation

eliminates the need for the three wire grounded

power cord and grounded power supply system.

Avoid body contact with grounded surfaces such

as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is

grounded.

Don't expose power tools to rain or wet

conditions. Water entering a power tool will increase the risk of electric

shock.

Do not abuse the cord. Never use the cord to carry the tools or pull

the plug from an outlet. Keep cord away from heat, oil, sharp edges or

moving parts. Replace damaged cords immediately. Damaged cords

increase the risk of electric shock.

•When operating a power tool outside, use an outdoor extension cord

marked "W-A" or "W". These cords are rated for outdoor use and reduce

the risk of electric shock. The following table shows the correct size to

use, depending on cord length and nameplate amperage rating of the tool.

When in doubt, use the next heavier gauge. Always use UL and CSA listed

17263 Manual Revised 09-0709 Page 4

extension cords.

Recommended sizes of extension cords

Ampere Rating

More Than

Not More Than

Volts

120v

Total Length of Cord in feet

25ft 50ft 100ft 150ft

AWG

18 16

16 16

14 12

16 14

14 12

Not Recommended

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattentionwhile

operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off before plugging in.

Carrying tools with your finger on the switch or plugging in tools that have

the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool on. A wrench

or a key that is left attached to a rotating part of the tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper

footing and balance enables better control of the tool in unexpected

situations.

• Use safety equipment. Always wear eye protection. Dust mask, non-skid

safety shoes, hard hat, or hearing protection must be used for appropriate

conditions.

Before connecting the tool to a power source (receptacle, outlet, etc.),

be sure voltage supplied is the same as that specified on the nameplate

of the tool. A power source with voltage greater than that specified for the

tool can result in serious injury to the user - as well as damage to the tool.

TOOL USE AND CARE

• Use clamps or other practical way to secure and support the workpiece

to a stable platform. Holding the work by hand or against your body is

unstable and may lead to loss of control.

•Do not force tool. Use the correct tool for your application. The correct

17263 Manual Revised 09-0709 Page 5

tool will do the job better and more safely at the rate for which is designed.

Do not use tool if the switch does not turn it on or off. Any tool that

cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing the tool. Such preventive

safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons.

Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools, with sharp cutting edges are less likely to bind and are

easier to control.

Check for misalignment or binding of moving parts, breakage of parts,

and any other condition that may affect the tools operation. If damaged,

have the tool serviced before using. Many accidents are caused by poorly

maintained tools.

•Use only accessories that are recommended by the manufacturer for

your model. Accessories that may be suitable for one tool, may become

hazardous when used on another tool.

•Do not alter or misuse tool. These tools are precision built. Any alteration or

modification not specified is misuse and may result in a dangerous condition.

SERVICE

•Tool service must be performed only by qualified repair personnel.

Service or maintenance performed by unqualified personnel could result in a

risk of injury.

When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure to follow Maintenance instructions may create a

risk of shock or injury.

SAFETY SYMBOLS FOR YOUR TOOL

The label on your tool may include the following symbols.

V............................................................... Volts

A............................................................... Amps

Hz............................................................. Hertz

W .............................................................. Watts

min ........................................................... Minutes

'_J ........................................................... Alternating Current

---. ......................................................... Direct Current

n............................................................ No-load Speed

17263Manual Revised 09-0709 Page 6

[] .............................................................. Class II construction

.../min ....................................................... Revolutions or Strokes per minute

•k, ........................................................... Indicates danger, warning caution.

It means attention! Your safety is

involved.

SPECIFIC SAFETY RULES FOR HAMMER DRILL

Hold the tool by its insulated gripping surfaces when performing an

operation where the cutting tool may contact hidden wiring. Contact with

a "live" wire will make exposed metal parts of the tool "live" and shock the

operator.

Never leave the trigger locked "ON",before plugging the tool in ,check that

the trigger lock is "OFF".

Do not use the "Lock-ON" feature in situations where drill bit binding is

likely.

Position the cord clear of rotating bit.

The hammer drill bit may be very hot. Do not touch the drill bit immediately

after drilling or hamming. The hot bit can cause a severe burn.

Secure the material being drilled. When drilling sheet metal, use a vice

and a block of wood placed under the material. Never hold the metal in your

hand, across your hand, or across your legs. Rotating sheet metal can cause

serious injury.

Never leave keys and adjusting wrenches on the tool before turning the

tool on.

• Do not use dull or damaged bits and accessories.

• When installing a drill bit, insert the shank of the bit well within the jaws of

the chuck.

• If the tool is stalled, release the trigger immediately, reverse the direction of

rotation, and slowly squeeze trigger to back out the bit.

•Do not operate the power unit with a damaged cord or plug. If damaged,

the plug should be replaced immediately.

•Do not operate power unit if it has received a sharp blow, been dropped,

or otherwise damaged in any way; take it to a qualified service person.

•Disconnect the power unit from power supply when it is not in use.

Following this rule will reduce the risk of electric shock, fire, or serious

personal injury.

_, WARNING: To reduce the risk of injury, user must read instruction manual.

,_ WARNING: Do not force the power tool. In heaw-duty applications,

excessive force can cause the power tool to overheat.

17263Manual Revised 09-0709 Page 7

A_, WARNING: Your hammer drill should never be connected to the power

source when you are assembling parts, making adjustments, installing or

removing bits, cleaning it or when it is not in use. Disconnecting the hammer drill

will prevent accidental starting, which could cause serious personal injury.

When unpacking the box, do not discard any packing materials until all of the

contents are accounted for:

1. Carefully lift the drill out of the carton and place it on a stable, flat surface.

2. Open the color box to locate the following:

• 1 Hammer drill

• Auxiliary handle

• Depth gauge

• Chuck key

• Case

• Operator's manual

3. Inspect the items carefully to make sure that no breakage or damage has

occurred during shipping. If any of the items mentioned is missing, (refer

to "PARTS LIST" illustration), return the drill to your nearest Sears store or

Craftsman outlet to have the drill replaced. Carefully remove the tool and any

accessories from the box. Make sure that all items listed in the packing list

are included.

_, WARNING: If any part is broken or missing, do not attempt to assemble the

hammer drill, plug in the power cord, or operate the hammer drill until the broken

or missing part has been replaced. Failure to do so could result in possible

serious injury.

CARTON CONTENTS/LOOSE PARTS (Fig. 1}

Fig.

Hammer Drill (Chuck key

included)

Auxiliary handle

Depth gauge 1

Case 1

17263 Manual Revised 09-0709 Page 8

ID]=_.'_o_l[e_]

KNOW YOUR HAMMER DRILL (Fig. 1)

Before attempting to use this hammer drill, familiarize yourself with all its

operating features and safety requirements.

_, WARNING: Do not allow familiarity with your hammer drill to make you

careless. Remember that a careless fraction of a second is sufficient to inflict

severe injury.

Fig. 2

Depth gauge

Drill chuck

Auxiliary handle

Hammer/Drill seletion switch

_! Forward/Reverse switch

i j Lock on button

Switch

PRODUCT SPECIFICATIONS

Motor 120V~60Hz, 6A

No Load Speed 0-2600 (RPM)

Hammer 0-46800 (BPM)

Keyed Chuck 1/2"

Maximum hammering capacity 1/2" in steel

3/4" in concrete

1-1/4" spade bit in soft wood

7/8" spade bit in hard wood

2" hole saw in soft wood

1" hole saw in hard wood

Weight 4.41bs (2kgs)

17263 Manual Revised 09-0709 Page 9

_, WARNING: The safe use of this product requires an understanding of the

information on the tool and in this operator's manual, as well as knowledge of the

project you are attempting. Before use of this product, familiarize yourself with all

operating features and safety rules.

ASSEMBLY AND ADJUSTMENTS (Fig.2)

A_, WARNING: Remove the

hammer drill from the carton

and examine it carefully. Do

not discard the carton or any

packaging material until all

parts are examined.

_1, WARNING: Before plugging

your hammer drill into the

power supply, always check

to make sure it is not in the

"Lock-on" position (depress

and release the trigger switch).

Failure to do so could result

in accidental starting of your

hammer drill, resulting in

possibly serious injury. Do not lock the trigger on jobs where your hammer drill

may need to be stopped suddenly.

INSTALLING THE AUXILIARY HANDLE AND DEPTH GAUGE

1. Slide the depth gauge into Fig. 3

the mounting hole located on

the grip clamp, depth gauqe

2. Slide the grip clamp and the

auxiliary handle onto the hammer .................... _

drill collar and secure it by

turning the handle unit it is tight.

3. The handle can be rotated

180° so that the depth gauge

can be used on either side of

the hammer drill housing.

clamp

auxiliary handle

mounting hole

_lk WARNING: The handle must be held firmly while the hammer drill is in use.

Do not hold the front metal housing while using the hammer drill.

ON/OFF TRIGGER SWITCH (Fig.4)

Turn your hammer drill on by pressing the trigger switch; release the switch to it

17263Manual Revised 09-0709 Page 10

Inhaltsverzeichnis

Andere Craftsman Bohren Handbücher

Craftsman

Craftsman 315.116890 Kurzanleitung zur Einrichtung

Craftsman

Craftsman 320.17592 Bedienungsanleitung

Craftsman

Craftsman 973.220490 Bedienungsanleitung

Craftsman

Craftsman 315.101300 Bedienungsanleitung

Craftsman

Craftsman 315.262520 Bedienungsanleitung

Craftsman

Craftsman 137.219120 Bedienungsanleitung

Craftsman

Craftsman 315.101280 Bedienungsanleitung

Craftsman

Craftsman 11543 - C3 19.2 Volt Cordless Hammer Bedienungsanleitung

Craftsman

Craftsman 315.101140 Bedienungsanleitung

Craftsman

Craftsman 315.HD3000 Kurzanleitung zur Einrichtung

Craftsman

Craftsman 973.111330 Bedienungsanleitung

Craftsman

Craftsman 315.119100 Bedienungsanleitung

Craftsman

Craftsman 315.11078 Bedienungsanleitung

Craftsman

Craftsman nextec 320.10003 Bedienungsanleitung

Craftsman

Craftsman 320.38595 Bedienungsanleitung

Craftsman

Craftsman 973.271830 Bedienungsanleitung

Craftsman

Craftsman evolv 320.30856 Bedienungsanleitung

Craftsman

Craftsman 315.111610 Bedienungsanleitung

Craftsman

Craftsman 315.27127 Bedienungsanleitung

Craftsman

Craftsman 315.DD2101 Bedienungsanleitung

Craftsman

Craftsman 315.119100 Bedienungsanleitung

Craftsman

Craftsman 315.10136 Bedienungsanleitung

Craftsman

Craftsman 315.101150 Bedienungsanleitung

Craftsman

Craftsman 315.101250 Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

KENT USA

KENT USA TRD1230 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung

Craftsman evolv 320.17263 Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken