Craftsman 137.407530 Bedienungsanleitung

Operator's Manual

10 iN. COMPACT SLIDE MITER SAW

Model No. 137.407530

C us

CAUTION"

Before using this Miter Saw,

read this manual and follow

all its Safety Rules and

Operating Instructions

• Safety Instructions

• Assembly

• Operation

• Maintenance

0 Parts List

Customer Help Line

For Technical Support

1-800-843-1682

Sears Parts &

Repair Center

1-800-488-1222

Sears Brands Management Corporation Hoffman Estates, IL 60179 USA

See the full line of Craftsman ®products at craftsman.corn

Click on the Craftsman Club ®link and join today!

Part No. 137407530001 Printed in China

SECTION PAGE

Warranty ................................................................................................................ 2

Product Specifications ........................................................................................... 3

Symbols .................................................................................................................. 4

Power Tool Safety .................................................................................................. 5

Compound Miter Saw Safety ................................................................................. 8

Electrical Requirements and Safety ....................................................................... 10

Accessories and Attachments ................................................................................ 12

Tools Needed for Assembly ................................................................................... 13

Carton Contents .................................................................................................... 14

Know Your Sliding Compound Miter Saw .............................................................. 15

Glossary of Terms .................................................................................................. 16

Assembly ............................................................................................................... 18

Adjustments ........................................................................................................... 24

Operation ............................................................................................................... 31

Maintenance .......................................................................................................... 46

Troubleshooting Guide .......................................................................................... 48

Parts List ............................................................................................................... 50

Repair Protection Agreement ................................................................................ 54

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted against defects in

material or workmanship. A defective product will receive free repair or replacement if repair

is unavailable. For warranty coverage details or to obtain free repair or replacement, visit the

web page: www.craftsman.com/warranty

This warranty does not cover the blade, which is an expendable part that can wear out from

normal use within the warranty period. This ONE YEAR warranty is void if this product is

ever used while providing commercial services or if rented to another person. For 90 DAY

commercial and rental use terms, see the Craftsman warranty web page. This warranty gives

you specific legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

CALIFORNIA PROPOSITION 65

WAR.I.Gl

Some dust created by power sanding, sawing, grinding, drilling and other construction

activities contains chemicals known to the state of California to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

®Lead from lead-based paints,

®Crystalline silica from bricks, cement and other masonry products, and

®Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work.

To reduce your exposure to these chemicals: work in a well ventilated area, and work

with approved safety equipment, such as those dust masks that are specially designed to

filter out microscopic particles. Avoid prolonged contact with dust from power sanding,

sawing, grinding, drilling, and other construction activities. Wear protective clothing and

wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or

lay on the skin may promote absorption of harmful chemicals.

2 ............................................................................................................................................................................................................................................................................................................................................................................

2013/11

MOTOR:

Power Source ........................................ 120V AC, 60 Hz, 15Amp

Speed .................................................... 4800 RPM (No load)

Electric Brake ........................................ Yes

Double Insulated ................................... Yes

Arbor Shaft Size .................................... 5/8 in.

BLADE:

Diameter ................................................ 10 in.

Arbor Hole ............................................. 5/8 in.

MITER SAW:

Miter Detent Stops ................................. 0°, 15°, 22.5°, 31.6°, 45° Right & Left

Bevel Positive Stops .............................. 0°, 33.9 °, 45° Left

CUTTING CAPACITY:

Crosscut (Maximum Height) .................. 3-1/2 in. x 11-1/2 in.

Crosscut (Maximum Width) ................... 2-1/2 in. x 12-1/2 in.

Miter 45 ° Right & Left ............................ 3-1/2 in. x 8 in.

Bevel 45 ° Left ........................................ 1-3/4 in. x 11-1/2 in.

45° Miter and 45° Bevel Left ................. 1-3/4 in. x 8 in.

Crown Molding Nested .......................... 5-3/4 in.

Base Molding Against Fence ................. 3-1/2 in.

,A WARNING 1

To avoid electrical hazards, fire hazards or damage to the tool, use proper

circuit protection. This tool is wired at the factory for 110=120 Volt operation.

It must be connected to a 110=120 Volt /15 Ampere time delay fuse or circuit

breaker. To avoid shock or fire, replace power cord immediately if it is worn,

cut or damaged in any way. Before using your tool, it is critical that you read

and understand these safety rules. Failure to follow these rules could result

in serious injury to you or damage to the tool.

WARNINGiCONS

Your power tool and its Operator's Manual may contain "WARNING iCONS"

(a picture symbol intended to alert you to, and/or instruct you how to avoid,

a potentially hazardous condition). Understanding and heeding these

symbols will help you operate your tool better and safer. Shown below are

some of the symbols you may see.

SAFETY ALERT: Precautions that involve your safety.

®PROHIBITION

0WEAR EYE PROTECTION: Always wear safety goggles or safety

glasses with side shields.

WEAR RESPIRATORY AND HEARING PROTECTION: Always wear

respiratory and hearing protection.

READ AND UNDERSTAND iNSTRUCTiON MANUAL: To reduce

the risk of injury, user and all bystanders must read and understand

instruction manual before using this product.

KEEP HANDS AWAY FROM BLADE: Failure to kee.p your hands

away from the blade will result in serious personal injury.

SUPPORT AND CLAMP WORK

[A DANGER1

IA wARNING1

IA CAUTION1

DANGER: indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING: indicates a potentially hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION: indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate injury,

I CAUTION i CAUTION: used without the safety alert symbol indicates

a potentially hazardous situation which, if not avoided, may

result in property damage,

GENERAL SAFETY iNSTRUCTiONS

BEFORE USING THiS POWER TOOL

Safety is a combination of common

sense, staying alert and knowing how

to use your power tool. 8.

[,A WARNING1

To avoid mistakes that could cause

serious injury, do not plug the tool in 9.

until you have read and understood

the following.

1. _ READ and become familiar

with the entire Operator's

Manual. LEARN the tool's

application, limitations and possible

hazards.

2. KEEP GUARDS iN PLACE and in

working order.

3. REMOVE ADJUSTING KEYS

AND WRENCHES. Form the habit

of checking to see that keys and

adjusting wrenches are removed

from the tool before turning ON.

4. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite

accidents.

10.

MAKE WORKSHOP CHILD

PROOF with padlocks, master

switches or by removing starter

keys.

DO NOT FORCE THE TOOL. It will

do the job better and safer at the

rate for which it was designed.

USE THE RIGHT TOOL. Do not

force the tool or an attachment

to do a job for which it was not

designed.

USE PROPER EXTENSION

CORDS. Make sure your extension

cord is in good condition. When

using an extension cord, be sure to

use the one heavy enough to carry

the current that the product will

draw. An undersized cord will result

in a drop in line voltage and in

loss of power which will cause the

tool overheat. The table on page

11 shows the proper wire gauge

size usage to each extension cord

length and ampere rating. If in

doubt, use the next heavier gauge.

The smaller the gauge number, the

heavier the cord.

5. DO NOT USE iN DANGEROUS

ENVIRONMENTS. Do not use

power tools in damp locations, or

expose them to rain or snow. Keep

work area well lit.

6. KEEP CHILDREN AWAY. All visitors

and bystanders should be kept a

safe distance from work area.

11.WEAR PROPER APPAREL. Do

not wear loose clothing, gloves,

neckties, rings, bracelets or other

jewelry which may get caught in

moving parts. Nonslip footwear is

recommended. Wear protective

hair covering to contain long hair.

12. _ ALWAYS WEAR EYE 17.

%) PROTECTION, Any power

tool can throw foreign

objects into the eyes and could

cause permanent eye damage.

ALWAYS wear Safety Goggles (not

glasses) that comply with ANSi

Safety standard Z87.1. Everyday

eyeglasses have only impact- 18.

resistant lenses. They ARE NOT

safety glasses. Safety Goggles are

available at Sears, NOTE: Glasses

or goggles not in compliance with

ANSI Z87.1 could seriously injure 19.

you when they break.

13. _ WEAR AFACE MASK

OR DUST MASK. Sawing

operation produces dust.

14. SECURE WORK. Use

clamps or a vice to hold

work when practical. It is

safer than using your hand and

it frees both hands to operate

the tool,

15. DISCONNECT TOOLS FROM

POWER SOURCE before servicing,

and when changing accessories

such as blades, bits and cutters.

16. REDUCE THE RISK OF

UNINTENTIONAL STARTING,

Make sure switch is in the OFF

position before plugging the tool in.

20.

21.

USE RECOMMENDED

ACCESSORIES. Consult

this Operator's Manual for

recommended accessories.

The use of improper accessories

may cause risk of injury to yourself

or others.

NEVER STAND ON THE TOOL,

Serious injury could occur if the

tool is tipped or if the cutting tool is

unintentionally contacted.

CHECK FOR DAMAGED PARTS.

Before further use of the tool, a

guard or other part that is damaged

should be carefully checked to

determine that it will operate

properly and perform its intended

function - check for alignment of

moving parts, binding of moving

parts, breakage of parts, mounting

and any other conditions that may

affect its operation. A guard or

other part that is damaged should

be properly repaired or replaced.

NEVER LEAVE THE TOOL

RUNNING UNATTENDED. TURN

THE POWER "OFF". Do not walk

away from a running tool until the

blade comes to a complete stop

and the tool is unplugged from the

power source.

DO NOT OVERREACH. Keep

proper footing and balance at all

times. NEVER reach across the

path of the cutting blade while tool

is in operation.

22.MAINTAINTOOLSWITHCARE.

Keeptoolssharpandcleanforbest

andsafestperformance.Follow

instructionsforlubricatingand

changingaccessories,

23.DONOTusepowertoolin

presenceofflammableliquids

orgases.

24.DONOToperatethetoolifyouare

undertheinfluenceofanydrugs,

alcoholormedicationnthatcould

affectyourabilitytousethetool

properly.

25.WARNING:Dustgeneratedfrom

certainmaterialscanbehazardous

toyourhealth.Alwaysoperatesaw

inwell-ventilatedareaandprovide

forproperdustremoval.

26"1,_, DANGER I Pe°plewith

electronic

devices, such as pacemakers,

should consult their physician(s)

before using this product. Operation

of electrical equipment in close

proximity to a heart pacemaker

could cause interference or failure

of the pacemaker.

27. WEAR HEARING

PROTECTION to reduce the

risk of induced hearing loss.

SPECiFiCSAFETYiNSTRUCTiONS

FOR THiS COMPOUND MITER SAW 10. USE only blade collars specified for

your saw.

DO NOT operate the miter saw

until it is completely assembled

and installed according to these

instructions.

iF YOU ARE NOT thoroughly

familiar with the operation of miter

saws, seek guidance from your

supervisor, instructor or other

qualified person.

11.

12.

13.

NEVER use blades larger in

diameter than 10 inches.

NEVER apply lubricants to the

blade when it is running.

ALWAYS check the blade for

cracks or damage before operation.

Replace a cracked or damaged

blade immediately.

,ALWAYS hold the work firmly

against the fence and table.

DO NOT perform any operation

free hand (use clamp wherever

possible).

14.

15.

NEVER use blades recommended

for operation at less than 4800 RPM.

ALWAYS keep the blade guards in

place and use at all times.

KEEP HANDS out of the path of

the saw blade. If the workpiece

you are cutting would cause your

hands to be within 7.5 in. of the

saw blade, the workpiece should

be clamped in place before making

the cut.

BE SURE the blade is sharp, runs

freely and is free of vibration.

16. NEVER reach around the saw blade.

17. MAKE SURE the blade is not

contacting the workpiece before the

switch is turned ON.

18. iMPORTANT: After completing the

cut, release the trigger and wait for

the blade to stop before returning

the saw to the raised position.

ALLOW the motor to come up to

full speed before starting a cut.

KEEP THE MOTOR AiR SLOTS

CLEAN and free of chips or dust.

ALWAYS MAKE SURE all handles

are tight before cutting, even if the

table is positioned in one of the

positive stops.

BE SURE both the blade and the

collar are clean and the arbor bolt

is tightened securely.

19.

20.

MAKE SURE the blade has come

to a complete stop before removing

or securing the workpiece,

changing the workpiece angle or

changing the angle of the blade.

NEVER cut metals or masonry

products with this tool. This miter

saw is designed for use on wood

and wood-like products.

21.NEVERcutsmallpieces.Ifthe

workpiecebeingcutwouldcause

yourhandorfingerstobewithin

7.5in.ofthesawbladethe

workpieceistoosmall.

22.PROVIDEadequatesupporttothe

sidesofthesawtableforlongwork

pieces.

23.NEVERusethemitersawinan

areawithflammableliquidsor

gases.

24.NEVERusesolventstoclean

plasticparts.Solventscould

possiblydissolveorotherwise

damagethematerial.

25.SHUTOFFthepowerbefore

servicingoradjustingthetool.

26.DISCONNECTthesawfrom

thepowersourceandcleanthe

machinewhenfinishedusing.

27.MAKESUREtheworkareais

cleanbeforeleavingthemachine.

31.

32.

33.

34.

28.SHOULDanypartofyourmitersaw

bemissing,damaged,orfailinany 35.

way,oranyelectricalcomponent

failtoperformproperly,lockthe

switchandremovetheplugfrom

thepowersupplyoutlet.Replace 36.

missing,damaged,orfailedparts

beforeresumingoperation.

29.Becauseofthedownwardcutting

motion,yoursafetyrequiresthat

youstayveryalerttokeeping

handsandfingersawayfromthe

paththatthebladetravels.

30.Besureallguardsareinplaceand

working.Ifaguardseemsslow

toreturntoitsnormalpositionor

"hangs-up",adjustorrepairit

immediately.Bealertatalltimes

-especiallyduringrepetitive,

monotonousoperations.Don'tbe

lulledintocarelessnessduetoa

falsesenseofsecurity.Blades

areextremelyunforgiving.Clean

thelowerguardfrequentlytohelp

visibilityandmovement.Unplug

beforeadjustmentorcleaning.

Abrasivecut-offwheelsshould

notbeusedonmitersaws.Miter

sawguardsarenotappropriatefor

abrasivecut-offwheels.

Toavoidlossofcontrolorplacing

handsinthepathoftheblade,

holdorclampallmaterialsecurely

againstthefencewhencutting.Do

notperformoperationsfreehand.

Supportlongmaterialatthesame

heightasthesawtable.

Aftercompletingacut,release

thetriggerswitchandallowthe

bladetocometoacompletestop,

thenraisethesawbladefromthe

workpiece.

Lockthemitersawheadinthe

downpositionduringtransportor

whennotinuse.

DRYRUN- Itisimportanttoknow

wherethebladewillintersect

withtheworkpieceduringcutting

operations.Alwaysperforma

simulatedcuttingsequencewiththe

powertoolswitchedOFFtogainan

understandingoftheprojectedpath

ofthesawblade.Atsomeextreme

angles,therightorleftsidefence

mighthavetoberemovedto

ensureproperclearancepriorto

makingacut.

POWER SUPPLY AND MOTOR

SPECiFiCATiONS

The AC motor used in this saw is

a universal, nonreversible type.

See "MOTOR" in the "PRODUCT

SPECIFICATIONS" section on page 3.

WARNINGl

To avoid electrical hazards, fire

hazards, or damage to the tool, use

proper circuit protection. Your saw

is wired at the factory for 120 V

operation. Connect to a 120 V,

15 A circuit and use a 15 A time

delay fuse or circuit breaker, To

avoid shock or fire, if power cord is

worn or cut, or damaged in any way,

have it replaced immediately.

ELECTRICAL REQUIREMENTS =

DOUBLE INSULATEDr_

The power tool is double insulated to

provide a double thickness of insulation

between you and tool's electrical

system. All exposed metal parts are

isolated from the internal metal motor

components with protecting insulation.

Replacement parts - When servicing

use only identical replacement parts.

Polarized plugs - This saw has a plug

that looks like the one shown below:

To reduce the risk of electrical shock,

this saw has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one

way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does

not fit, contact a qualified electrician to

install the proper outlet. Do not change

the plug in any way.

WARNING}

Double insulation does not take the

place of normal safety precautions

when operating this tool.

To avoid electrocution:

1. Use only identical replacement

parts when servicing a tool with

double insulation. Servicing

should be performed by a

qualified technician.

2. Do not use power tools in wet or

damp locations or expose them

to rain or snow.

MOTOR SAFETY PROTECTION

IMPORTANT:

To avoid motor damage, the motor

should be blown out or vacuumed

frequently to keep sawdust from

interfering with the motor ventilation.

1. CONNECT this sawto a 120 V, 15A

circuit with a 15 A time-delay fuse or

circuit breaker. Using the wrong size

fuse can damage the motor.

2. If the motor won't start, release the

trigger switch immediately. UNPLUG

THE SAW. Check the saw blade to

make sure it turns freely. If the blade

is free, try to start the saw again. If

the motor still does not start, refer to

the TROUBLESHOOTING GUIDE.

Inhaltsverzeichnis

Andere Craftsman Gesehen Handbücher

Craftsman

Craftsman 572.24700 Bedienungsanleitung

Craftsman

Craftsman 137.212150 Bedienungsanleitung

Craftsman

Craftsman 113.244510 Bedienungsanleitung

Craftsman

Craftsman 113.234940 Bedienungsanleitung

Craftsman

Craftsman 137.212140 Bedienungsanleitung

Craftsman

Craftsman 21237 - 10 in. Sliding Miter Saw Bedienungsanleitung

Craftsman

Craftsman 118.22000 Bedienungsanleitung

Craftsman

Craftsman CMES300 Bedienungsanleitung

Craftsman

Craftsman CMXEMAX69434501 Bedienungsanleitung

Craftsman

Craftsman 113.198411 Operators Bedienungsanleitung

Craftsman

Craftsman 126.32561 Bedienungsanleitung

Craftsman

Craftsman 315.108400 Bedienungsanleitung

Craftsman

Craftsman Professional 315.228510 Bedienungsanleitung

Craftsman

Craftsman Craftsman 113.236180 Bedienungsanleitung

Craftsman

Craftsman 137.218010 Bedienungsanleitung

Craftsman

Craftsman 22299 Bedienungsanleitung

Craftsman

Craftsman 315.212350 Bedienungsanleitung

Craftsman

Craftsman 21807 - 10 in. Table Saw Bedienungsanleitung

Craftsman

Craftsman 113.23611t Bedienungsanleitung

Craftsman

Craftsman 5411.3 Bedienungsanleitung

Craftsman

Craftsman 172.171040 Bedienungsanleitung

Craftsman

Craftsman 137.415030 Bedienungsanleitung

Craftsman

Craftsman 351.243981 Bedienungsanleitung

Craftsman

Craftsman 21602 - 16 in. Variable Speed Scroll Saw Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung