Craftsman 172.26672 Bedienungsanleitung

Owner's Manual

ICRAFTSMRNI

IPR Q FEa II0 NAL

Reciprocating Saw

Vafriable Speed

Double Insulated

Model No.

172.26672

CAUTION: Read, understand and follow

all Safety Rules and Operating Instructions

inthis manual before using this product,

,,SAFETY

•OPERATION

•MAINTENANCE

•ESPAI;IOL

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Warranty.::.: ........................................................... Page 2

Safety Instructions .............................................. Pages 3-7

Safety Symbols ............................................... Page 7

Description ............................................................ Page 8

Operation .......................................................... Pages 8-11

Maintenance .......................................................... Pages t2-13

Accessories ......................................................... :.Page 13

Parts List ................................... :........................... Page 14-15

Service Numbers ................................................... Back Cover

ONE FULLYEARWARRANTY ON CRAFTSMAN TOOL

If this Craftsman Tool fails to give complete satisfactionwithin one year horn

the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR

SEARS PARTS &REPAIR CENTER tNTHE UNTIED STATES, and Sears

will replace it, free of charge.

If this Craftsman Tool is used for commercial or rental purposes, this warranty

applies far only 90 days from the date of purchase.

This warranty gives you specificlegal rights, and you may also have other

rights which vary from state to state.

Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONSI

I/_ WARNING: BE SURE to read and understand all instructions.

FaiFurs to follow all instructions Fisted below may result in electric

shock, fire and/or serious personal injury.

WORK AREA SAFETY

1. ALWAYS keep your work area clean and well IlL Cluttered benches and

dark areas invite accidents.

2. DO NOT operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes•

3. ALWAYS keep bystanders, ehUdran, and visitors away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Doubts insulated tools are equipped with a polarized plug (one blade is

wider than the other.) This plug wilFf'd in a polarized outlet only one way.

if the plug does not fit fully In the outlet, reverse the plug. if it still does

not fit, contact a qualified electrician to install a polarized outlet.

Do not change the plug in any way.

2. Double insulation [] eliminates the need for the three wire grounded power

cord and grounded power supply system. Applicable only to Class II

(doubre insulated) tools.

3. Before plugging in the tool, BE SURE that the outlet voltage supplied is

within the voltage marked on the tool's data plate, DO NOT use "AC only"

rated tools with a DC power supply.

4. ALWAYS avoid body contact with grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock ifyour body is grounded.

5. If operating the power tool In damp locations Is unavoidable,

/ALWAYS use a Ground Fault Circuit Interrupter to supply power to

your tool. ALWAYS wear electrician's rubber gloves and footwear

in damp conditions,

6, DO NOT expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk of electric shock.

7. DO NOT abuse the cord. NEVER use the cord to carry the tools or pull

the plug from the outlet. Keep cord away from heat, off, sharp edges or

moving parts. Replace damaged cords immediately. Damaged cords

increase the risk of electric shock.

ELECTRICALSAFETYcont.

8.Whenoperating a power tool outside, ALWAYS use an outdoor extension

cord marked '_JV-A"or 'W." These cords are rated for outdoor use and

reduce the risk of electhc shock.

NOTE: The extension cord must have adequate wire size AWG (American Wire

Gauge) for safe, efficient use. Smaller gauge wires, have greater capacity

(16 gauge wire has more capacity than 18 gauge wire).

PERSONAL SAFETY

1. ALWAYS stay alert, watch what you are doing and use common sense

when operating a power tool. DO NOT use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

2. ALWAYS dress properly. DO Nor wear loose clothing or Jowelry. Pull

back long hair. Keep your hair, clothing, and gloves away from moving

parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3. ALWAYS avoid accidental starting. BE SURE switch is in the "Off"

posttion before plugging in. DO NOT carry tools with your finger on the

switch. Carrying tools w_thyour finger on the switch or plugging in tools that

have the switch in the "On" posif_oninvites accidents.

4. ALWAYS remove adjusting keys or wrenches before turning the toot on.

A wrench or a key that is left attached to a rotating part of the tool may result

in personal injury.

5. DO NOT overreach. ALWAYS keep proper footing and balance at all

times. Proper footing and balance enables better control of the tool in

unexpected situations.

6, ALWAYS use safety equipment. Always wear eye protection,

Dust mask, non-skid safety shoes, hard hat, or hearing protection must be

used for appropriate conditions

TOOLUSEANDCARESAFETY

1.ALWAYSuseclampsorother practical ways to secure and support the

workptace to a stable platform. Holding the work by hand or against your

body is unstable and may lead to loss of control.

2. DO NOT force tool. Use the correct tool and blade for your application.

The correct tool and blade wiltdo the job better and safer at the rate for

which it is designed.

3. DO NOT use tool If switch does not turn it"On" or"Off". Any tool that

cannot be controlled with the switch isdangerous and must be repaired.

4. ALWAYS disconnect the plug from the power source before making any

adjustments, changing accessories,or storing the tool. Such preventive

safety measures reduce the risk of starting the tool accidentally.

5, ALWAYS store Idle tools out of reach of children and other untrained

persons.Tools are dangerous in the hands of untrained users.

6. ALWAYS maintain tools with care. Keep cutting tools sharp and clean.

Properly maintained tools with sharp cutting edges are less likely to bind

and are easier to control.

7. ALWAYS check for mlsalignment or binding of moving par_s, breakage

of parts, and any other condition that may affect the tool's operation.

If damaged, have the tool serviced before using. Many accidents are

caused by poorly maintained too;s,

[Ak WARNING: USEOFACCESSORIESTHATARENOT

RECOMMENDED FOR USE WITH THIS TOOL MAY CREATE

AHAZARDOUS CONDITION.

8. ALWAYS use only accessories that are recommended for this tool.

Accessories that may be suitable for one tool can become hazardous

when used on another tool.

SERV1CE SAFETY

1. If any part of this saw Is missing or should break, bend, or fail in any

way; or should any electrical component fail to perform properly:

ALWAYS shut off the power switch and remove the saw plug from the power

source and have the missing, damaged or fei(ed parts replaced BEFORE

resuming operation.

2.Toot service must be performed only at a Sears Service Center. Service

or maintenance performed by unqualified pemonnel could result in arisk

of injuP!.

ADDITIONAL SPECIFIC SAFETY RULES

t. Know your power tool. Read operator's manual carefully. Learn the

applications and limitations, as wed as the specific potential hazards

related to this tool. Fo_owing this rule 'Nil[reduce the r_skof electric shock,

fire or sedous i_ury.

2. ALWAYS hold tool by insulated gdpp|ng surfaces when pet_corming an

operation where the cutting tool may contact hidden wiring or Its own

cord, Contact with a 'live_wire wilt make the exposed metal parts of the tool

"_ive"end shock the operator.

3. ALWAYS keep your hands away from cutting at_)a. DO NOT reach under

the matedal being cut because the nesmess of the blade to your hand is

hidden from your sight.

4. DO NOT use dull or damaged bisdes. Bent blades can break easily,

or cause kickback,

5, ALWAYS wear safety glasses or eye shields when using this saw.

ALWAYS wear a dust mask or respirator for applications which

generate duel

g. ALWAYS protect your lungs.Wear a face mask or dust mask if the

operation is dusty. Following this rule will reduce the dsk of serious

personal injury.

7. ALWAYS protect your hearing,wear hearing protection during extended

periods of operation. Following this rule will reduce the risk ofsadous

personal injury.

8. ALWAYS inspect and remove all nails from lumber before sawing.

Following this rule will reduce the risk of serious personal injury.

g. SAVE THESE INSTRUCTIONS. Rofer to them frequently and use them to

instruct others who may use this tool. If someone borrows this tool,

make sure they have these InntrucUons also.

ADDITIONAL SPECIFIC SAFETY RULES ¢onL

Z_ WARNING: Some dust particles crusted by power sanding,

sawing, grinding, drilling and other ¢anetructlon Jobs contain

chemicals known to cause cancer, birth defects or other reproductive

harm. Soma examples of theee chemfcals am:

• Lead from lead,-based paints.

• Crystalline silica from bricks and cement and other masonry products.

-Arsenic and chromium from chemically-treated lumber,

Your risk from these exposures varies, depending upon how often you do this

type of work. To reduce your exposure to these chemicals:

• Work in awel{-ventifatad area.

• Work with approved safety equipment, such as those dust

masks that are specially designed to filterout microscopic

particles.

/_ WARNING: The operallan of any saw can

result in foreign objects being thrown iota your eyes,

which can reeolt in severe eye damage. Before

beginning power tool ope_'ation,ALWAYS wear

safety goggles or safety glasses with side shield

and a fall face shield when needed.We recommend

aWide Vision Safety Mask for use o,_ereyegk_sses

or standard safety glasses with side shield, both available

at Sears Retail Stores.

The label on your tool may Include the foltowtng symbols.

V........................................................................... Volts

A........................................................................... Amperes

Hz ......................................................................... Hertz

•W. ......................................................................... Watts

_' rain ....................................................................... Miseries

_'_ ........................................................................ Alternating current

.... •.................................................................. Direct curt'ant

no ........................................................................ No-load speed

[] ........................................................................ Class If construction

.,./rata ................................................................... Revolutions or

reciprocation per minute

z_ ...................................................................... Indicates danger, warning

caution, it means attention!!!

Yoursafety is Involved.

IMPORTANT! READ ALL INSTRUCTIONS

Your12.0-amp redprocabngsaw hasmanybuilt-inc_enience features for fast, efficient

cutting.Thesefeaturesincludea variablespssd triggerswitchthat allowsyou to change

the speedsfor cuttingavadetyof rrmteriais,A/1adjustal_e/pivotingshoe/or maximum

conlm_in a varfatyof cutsand an easy-tc-griprubberboot.The tool-lessbladecJamphas

easy leveractionfar extrafast bladechanges.

Fig. 1 _r_ Tool-_essBlade Clamp /Variable Speed

Trigger Switch

Btade Rubber

Handle

•Gdp

='="==_llJir,=w_--=-__ _.;,_-=:- :'-:=.1_,

Input

BladeStroke

BladeType

Rating

No-feadSpeeds

12.0 Amps

11/4in.

1/2in. Universal Shank

120 volts, 60 Hz AC

0to 2700 SPM

Beforeattemptingto useany tool,be sureto familiarizeyourselfwith all

theoperatingfeatures andsafetyinstructfe_s.

z_ WARNING: %FANY PARTS ARE MISSING, 00 NOT OPERATE

THIS SAW UNTIL THE MISSING PARTS ARE REPLACED. FAILURE TO

DO SO COULD RESULT IN POSSIBLE SERIOUS PERSONAL INJURY.

A_ CAUTION; DO NOT let familiarity with your saw make you

careless. Remember that a careless fraction of asecond issufficient to

cause severe injury,

Z_ CAUTION: ALWAYSwear eye protacttonwhileoperat(ngthis J

powertool. ,.....

USING THE TRIGGER SVVITCH TO CONTROL VARIABLE SPEED

This saw is equipped with a vadatde speed trigger switch. The saw can be

turned ON or OFF by squeezing or releasing the trigger switch.

The speed of the blade can be adjusted by the pressure you apply to the

trigger switch. s!

USINGTHETRIGGER SWITCH TO CONTROLVARIABLE SPEED cont.

1. To increase the speed, apply more pressure to the trigger switch.

2. To decrease the speed, apply less pressure,

Choosing the Correct Speed

The speed you use will depend on the type of materials that you are cutting:

1. Use high speeds for cutting wood.

2. Medium speed is best for non-ferrous materials.

3. Low speed is recommended for curing metal,

NOTE:Material thickness and blade selection will also affect your speed

selection. As ageneral rule, as the material thickness increases, the speed

should be slower.

Z_ CAUTION: useaveryslowspeedwhen beginninga cut. Then

increase speed once the cut is started. Preloaged use at a very slow

speed may damage your saw.

BLADE INSTALLATION AND REMOVAL

This sow is designed to use all 1/2-in. universal shank blades.

I _ WARNING: To prevent personal injury,ALWAYS disconnect the

plug from power source BEFORE assembling parts, making adjustments

or changing blades.

To Install Blade (Figure 2)

1. Disconnect saw from power soume.

2. When installing the blade, extend the

adjustable/pivoting shoe away from the

blade clamp orjust remove it for easier

access.

3. Push blade clamp lever up with your

thumb and hold it.

•4. insert the blade into the saw's blade

f" clamp and make sure that blade

attaches to 1he blade nub inside damp,

5. Release blade clamp lever to lock blade

in place. Pull on blade to be sure it is

securely locked in place.

To Remove Blade

1. Disconnect saw from power source.

2, When removingthe blade, extendthe

adjustable/pivotingshoeawayfrom the blade

damp or just removeitfor easier access.

3, Push blade clamp lever up with your

thumb and hold it.

4. Pull the blade out of the blade clamp.

Fig.2 {}ladeC_npLe_er_._ /

_pme_ sh_l

BIw,6e Cl_'_mp

0 m == 0 •

THE SLIDING IpIVOTING SHOE (Figure 3)

The shoe slides in or out to adjust the

depth of cut to material being cut for

maximum control and longer blade life.

Adjusting the Depth of the Shoe

1. Push down and hold the shoe

adjustment button.

2, Slide shoe in or out to the depth of cut

that you desire and then release the

shoe ad ustment buttor_to lock the

shoe in p ace.

NOTE: The shoe also pivots to provide

maximum control against the surface

being cut.

Fig. 3 Moves in or out

To Pivot Shoe: (See Fig. 3)

1. Firmly hbid saw and then pivot I

shoe to desired position. IF], 4

FLUSH CUTTING (Figure 4)

1. Use the blade installed teeth up.

The compact design of the motor

housing and the adjustabie/pivottog

shoe on this saw allows you to make

extremely ctose cuts in floors, corners

and other extremely tight areas.

2. To obtain the maximum flush cubing

capability of this saw, make sure that

the shoe is in its cJceestposition to the

saw housing. And the teeth of'the blade

ere facing as close as possible to the

work surface.

WOOD CUTTING (Figure 5)

t. ALWAYS clamp the workpieco

down to prevent it from s))pping.

2. Place the adjuetobie shoe and

the blade lightly against the

surface to be cut,

3. Turn on saw and allow it to come

to full speed before applying pressure

to the workplace,

4, ALWAYS hold the saw firmly with=beth

hands while cutting. Whenever powdble,

hotd the adjustable shoe flrmty ag_net

the matodal to be cuL This will preempt

the saw from jumping or vibretfngand

help minimize blade breakage.

NOTE: Wear gloves if cutting for long periods.

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Gesehen Handbücher

Craftsman

Craftsman 315.108320 Bedienungsanleitung

Craftsman

Craftsman 315.243130 Bedienungsanleitung

Craftsman

Craftsman 315.115820 Bedienungsanleitung

Craftsman

Craftsman 315.11870 Bedienungsanleitung

Craftsman

Craftsman 113.248212 Bedienungsanleitung

Craftsman

Craftsman 21194 - 7-1/4 in. Sliding Compound Miter Saw Bedienungsanleitung

Craftsman

Craftsman Professional 315.228510 Bedienungsanleitung

Craftsman

Craftsman 113.298090 Bedienungsanleitung

Craftsman

Craftsman 172.10853 Bedienungsanleitung

Craftsman

Craftsman nextec 320.61325 Bedienungsanleitung

Craftsman

Craftsman 137.221940 Bedienungsanleitung

Craftsman

Craftsman 113.2472T0 Bedienungsanleitung

Craftsman

Craftsman 320.46123 Bedienungsanleitung

Craftsman

Craftsman 315.212740 Bedienungsanleitung

Craftsman

Craftsman 137.21236 Bedienungsanleitung

Craftsman

Craftsman 900.112650 Bedienungsanleitung

Craftsman

Craftsman 137.21602 Bedienungsanleitung

Craftsman

Craftsman 113.242720 Bedienungsanleitung

Craftsman

Craftsman 351.224400 Bedienungsanleitung

Craftsman

Craftsman 113.242502 Bedienungsanleitung

Craftsman

Craftsman 351.224360 Bedienungsanleitung

Craftsman

Craftsman 137.216200 Bedienungsanleitung

Craftsman

Craftsman 137.415020 Bedienungsanleitung

Craftsman

Craftsman 172.10851 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung