Craftsman 21194 - 7-1/4 in. Sliding Compound Miter Saw Bedienungsanleitung

Operator's Manual

CRRFrSr4RH°

7-1/4 in. SLiDiNG COMPOUND

MITER SAW WiTH LASER TRAC®

Model No. 137.211940

C US

CAUTION:

Before using this Miter Saw,

read this manual and follow

all its Safety Rules and

Operating Instructions

• Safety Instructions

• Installation

• Operation

• Maintenance

• Parts List

Customer Help Line

For Technical Support

1-800-843-1682

Sears Parts &

Repair Center

1-800-488-1222

Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA

Visit our Craftsman website: www.sears.com/craftsman

Part No. 137211940001 Printed in China

SECTION PAGE

Warranty.........................................................................................2

ProductSpecifications....................................................................3

Symbols..........................................................................................4

PowerToolSafety..........................................................................5

CompoundMiterSawSafety..........................................................7

ElectricalRequirementsandSafety.................................................. 9

AccessoriesandAttachments........................................................11

ToolsNeededforAssembly............................................................12

CartonContents.............................................................................13

KnowYourSlidingCompoundMiterSaw......................................... 14

GlossaryofTerms..........................................................................15

AssemblyandAdjustments.............................................................17

Operation.......................................................................................26

Maintenance...................................................................................37

TroubleshootingGuide...................................................................39

PartsList........................................................................................41

CRAFTSMAN ONE YEAR FULL WARRANTY

If this Craftsman tool fails due to a defect in material or workmanship within

one year from the date of purchase, call 1-800-4-MY-HOME ®to arrange for

free repair (or replacement if repair proves impossible).

This warranty applies for only 90 days from the date of purchase if this product

is ever used for commercial or rental purposes.

This warranty does not include expendable parts, such as lamps, batteries,

bits or blades.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

WARNING ]

Some dust created by using power tools contains chemicals known to the

state of California to cause cancer and birth defects or other reproductive

harm. Some examples of these chemicals are:

o Lead from lead-based paints

o Crystalline silica from bricks, cement and other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do

this type of work. To reduce your exposure to these chemicals, work in a

well ventilated area and work with approved safety equipment such as dust

masks that are specially designed to filter out microscopic particles.

MOTOR

Power Source ..................................................................... 9Amp, 120V AC, 60Hz

Speed ................................................................................. 5000 RPM (No load)

Brake .................................................................................. Electric

Double Insulated ................................................................. Yes

BLADE SIZE

Diameter .............................................................................. 7-1/4 in.

Arbor size ............................................................................ 5/8in.

ROTATING TABLE:

Diameter ............................................................................ 9-1/32 in.

Miter Detent Stops ............................................................ 0, 15,22.5, 31.6, 45°R & L

Bevel Positive Stops ......................................................... 0, 45° L

CUTTING CAPACITY:

Crosscut ............................................................................ 2 in. x 8 in.

Miter 45 ° R & L................................................................... 2 in. x 6 in.

Bevel 45° L......................................................................... 1-1/2 in. x 8 in.

45° Miter and 45° Bevel ..................................................... 1-1/2 in. x 6 in.

i_J_WARNING]

To avoid electrical hazards, fire hazards or damage to the tool, use proper

circuit protection.

This tool is wired at the factory for 110=120 Volt operation, it must be

connected to a 110=120 Volt /15 Ampere time delay fuse or circuit breaker.

To avoid shock or fire, replace power cord immediately if it is worn, cut or

damaged in any way.

Before using your tool, it is critical that you read and understand these

safety rules. Failure to follow these rules could result in serious injury to

you or damage to the tool.

WARNINGiCONS

Your power tool and its Operator's Manual may contain "WARNING iCONS"

(a picture symbol intended to alert you to, and/or instruct you how to avoid,

a potentially hazardous condition). Understanding and heeding these

symbols will help you operate your tool better and safer. Shown below are

some of the symbols you may see.

SAFETY ALERT: Precautions that involve your safety.

®PROHiBiTiON

WEAR EYE PROTECTION: Always wear safety goggles or safety

glasses with side shields.

READ AND UNDERSTAND OPERATOR'S MANUAL: To reduce

the risk of injury, user and all bystanders must read and understand

operator's manual before using this product.

KEEP HANDS AWAY FROM BLADE: Failure to keep your hands

away from the blade will result in serious 3ersonal injury.

SUPPORT AND CLAMP WORK

[,_, DANGER] DANGER: indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING: indicates a potentially hazardous situation

which, if not avoided, could result in death or serious

injury.

CAUTION: indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury.

GENERALSAFETY iNSTRUCTiONS 8.

BEFORE USING THIS POWER TOOL

Safety isa combination of common

sense, staying alert and knowing how 9.

to use your power tool.

CAUTION

To avoid mistakes that could cause

serious injury, do not plug the tool in 10.

until you have read and understood

the following.

READ and become familiar with

the entire Operator's

Manual. LEARN the tool's

application, limitations and

possible hazards.

KEEP GUARDS iN PLACE and in

working order.

REMOVE ADJUSTING KEYS

AND WRENCHES. Form the habit

of checking to see that keys and

adjusting wrenches are removed

from the tool before turning ON.

KEEP WORK AREA CLEAN.

Cluttered areas and benches invite

accidents.

.DO NOT USE iN DANGEROUS

ENVIRONMENTS. Do not use

power tools in damp locations, or

expose them to rain or snow. Keep

work area well lit.

.KEEP CHILDREN AWAY. All

visitors and bystanders should be

kept a safe distance from work

area.

.MAKE WORKSHOP CHILD

PROOF with padlocks, master

switches or by removing starter

keys.

11.

12.

DO NOT FORCE THE TOOL. It will

do the job better and safer at the

rate for which itwas designed.

USE THE RIGHT TOOL. Do not

force the tool or an attachment

to do a job for which it was not

designed.

USE PROPER EXTENSION

CORDS. Make sure your extension

cord is in good condition. When

using an extension cord, be sure

to use one heavy enough to carry

the current your product will draw.

An undersized cord will result in

a drop in line voltage and in loss

of power which will cause the tool

to overheat. The table on page

10 shows the correct size to use

depending on cord length and

nameplate ampere rating. If in

doubt, use the next heavier gauge.

The smaller the gauge number, the

heavier the cord.

WEAR PROPER APPAREL. Do

not wear loose clothing, gloves,

neckties, rings, bracelets or other

jewelry which may get caught in

moving parts. Nonslip footwear is

recommended. Wear protective

hair covering to contain long hair.

OALWAYS WEAR EYE

PROTECTION. Any power

tool can throw foreign

objects into the eyes and

could cause permanent eye

damage. ALWAYS wear Safety

Goggles (not glasses) that comply

with ANSI Safety standard Z87.1.

Everyday eyeglasses have only

impact-resistant lenses. They

ARE NOT safety glasses. Safety

Goggles are available at sears.

NOTE:Glassesorgogglesnotin

compliance with ANSI Z87.1 could

seriously injure you when they

break.

and any other conditions that may

affect its operation. A guard or

other part that is damaged should

be properly repaired or replaced.

13. WEAR A FACE MASK OR DUST

MASK. Sawing operation produces

dust.

14. SECURE WORK. Use

clamps or a vise to hold work

when practical. It issafer

than using your hand and it

frees both hands to operate

the tool.

15. DISCONNECT TOOLS FROM

POWER SOURCE before servicing,

and when changing accessories

such as blades, bits and cutters.

16. REDUCE THE RiSK OF

UNINTENTIONAL STARTING.

Make sure switch is in the OFF

position before plugging the tool in.

17. USE RECOMMENDED

ACCESSORIES. Consult

this Operator's Manual for

recommended accessories. The

use of improper accessories may

cause risk of injury to yourself or

others.

18. NEVER STAND ON THE TOOL.

Serious injury could occur if the

tool is tipped or if the cutting tool is

unintentionally contacted.

20. NEVER LEAVE THE TOOL

RUNNING UNATTENDED. TURN

THE POWER "OFF". Do not walk

away from a running tool until the

blade comes to a complete stop

and the tool is unplugged from the

power source.

21. DO NOT OVERREACH. Keep

proper footing and balance at all

times.

22. MAINTAIN TOOLS WiTH CARE.

Keep tools sharp and clean for best

and safest performance. Follow

instructionsfor lubricating and

changing accessories.

23. WARNING: Dust generated from

certain materials can be hazardous

to your health. Always operate saw

in well-ventilated area and provide

for proper dust removal.

24.IA, DANGER ] People with

electronic devices, such as

pacemakers, should consult their

physician(s) before using this

product. Operation of electrical

equipment in close proximity to

a heart pacemaker could cause

interference or failure of the

pacemaker.

19. CHECK FOR DAMAGED PARTS.

Before further use of the tool, a

guard or other part that is damaged

should be carefully checked to

determine that it will operate

properly and perform its intended

function - check for alignment of

moving parts, binding of moving

parts, breakage of parts, mounting

SPECiFiC SAFETY iNSTRUCTiONS

FOR THiS COMPOUND MITER SAW

.DO NOT operate the miter saw

until it is completely assembled

and installed according to these

instructions.

.iF YOU ARE NOT thoroughly

familiar with the operation of miter

saws, seek guidance from your

supervisor, instructor or other

qualified person.

10.

11.

12.

13.

ALWAYS hold the work firmly 14.

against the fence and table.

DO NOT perform any operation

free hand (use clamp wherever

possible). 15.

KEEP HANDS out of the path of

the saw blade. If the workpiece 16.

you are cutting would cause your

hands to be within 6-3/4 in. of the

saw blade, the workpiece should 17.

be clamped in place before making

the cut.

USE only blade collars specified for

your saw.

NEVER use blades larger in

diameter than 7-1/4 inches.

NEVER apply lubricants to the

blade when it is running.

ALWAYS check the blade for

cracks or damage before operation.

Replace a cracked or damaged

blade immediately.

NEVER use blades recommended

for operation at less than 5000

RPM.

ALWAYS keep the blade guards in

place and use at all times.

NEVER reach around the saw

blade.

MAKE SURE the blade is not

contacting the workpiece before the

switch is turned ON.

5. BE SURE the blade is sharp, runs 18.

freely and is free of vibration.

6. ALLOW the motor to come up to

full speed before starting a cut. 19.

7. KEEP THE MOTOR AiR SLOTS

CLEAN and free of chips or dust.

8. ALWAYS MAKE SURE all handles

are tight before cutting, even ifthe

table is positioned in one of the 20.

positive stops.

9. BE SURE both the blade and the

collar are clean and the arbor bolt

is tightened securely.

iMPORTANT: After completing the

cut, release the trigger and wait for

the blade to stop before returning

the saw to the raised position.

MAKE SURE the blade has come

to a complete stop before removing

or securing the workpiece,

changing the workpiece angle or

changing the angle of the blade.

NEVER cut metals or masonry

products with this tool. This miter

saw is designed for use on wood

and wood-like products.

21.NEVERcutsmallpieces.Ifthe

workpiecebeingcutwouldcause

yourhandorfingerstobewithin

6-3/4in.ofthesawbladethe

workpieceistoosmall.

22.PROVIDEadequatesupporttothe

sidesofthesawtableforlongwork

pieces.

23.NEVERusethemitersawinan

areawithflammableliquidsor

gases.

24.NEVERusesolventstoclean

plasticparts.Solventscould

possiblydissolveorotherwise

damagethematerial.

25.SHUTOFFthepowerbefore

servicingoradjustingthetool.

26.DISCONNECTthesawfrom

thepowersourceandcleanthe

machinewhenfinishedusing.

27.MAKESUREtheworkareais

cleanbeforeleavingthemachine.

28.SHOULDanypartofyourmitersaw

bemissing,damaged,orfailinany

way,oranyelectricalcomponent

failtoperformproperly,lockthe

switchandremovetheplugfrom

thepowersupplyoutlet.Replace

missing,damaged,orfailedparts

beforeresumingoperation.

POWERSUPPLYANDMOTOR

SPECiFiCATiONS

TheACmotorusedinthissawis

auniversal,nonreversibletype.

See"MOTOR"inthe"PRODUCT

SPECIFICATIONS"sectiononpage3.

[,,d_WARNING]

To avoid electrical hazards, fire

hazards, or damage to the tool,

use proper circuit protection. Your

saw is wired at the factory for 120

V operation. Connect to a 120 V, 9A

circuit and use a 9 A time delay fuse

or circuit breaker. To avoid shock

or fire, if power cord is worn or

cut, or damaged in any way, have it

replaced immediately.

DOUBLE iNSULATED []

The power tool is double insulated to

provide a double thickness of insulation

between you and tool's electrical

system. All exposed metal parts are

isolated from the internal metal motor

components with protecting insulation.

Replacement parts - When servicing,

use only identical replacement parts.

Polarized plugs - This saw has a plug

that looks like the one shown below:

To reduce the risk of electrical shock,

this saw has a polarized plug (one

blade iswider than the other). This plug

will fit in a polarized outlet only one

way. Ifthe plug does not fit fully in the

outlet, reverse the plug. If itstill does

not fit, contact a qualified electrician to

install the proper outlet. Do not change

the plug in any way.

I,A WARNING J

Double insulation does not take the

place of normal safety precautions

when operating this tool.

To avoid electrocution:

1. Use only identical replacement parts

when servicing a tool with double

insulation. Servicing should be

performed by a qualified technician.

2. Do not use power tools in wet or

damp locations or expose them to

rain or snow.

MOTOR SAFETY PROTECTION

iMPORTANT

To avoid motor damage, the motor

should be blown out or vacuumed

frequently to keep sawdust from

interfering with the motor ventilation.

1. Connect this saw to a 120 V circuit.

This circuit must not be less than a

#18 wire with a 9 A time lag fuse.

NOTE: When using an extension

cord on a circuit with a #18 wire, the

extension cord must not exceed 25

feet in length.

2. If the motor will not start, release

the trigger switch immediately.

UNPLUG THE SAW. Check the saw

blade to make sure it turns freely. If

the blade is free, try to start the saw

again. If the motor still does not start,

refer to the TROUBLESHOOTING

GUIDE.

3. If the tool suddenly stalls while

cutting wood, release the trigger

switch, unplug the tool and free the

blade from the wood. The saw may

nowbestartedandthecutfinished.

4. FUSESmay"blow"orcircuit

breakersmaytripfrequentlyif:

a. MOTORisoverloaded-

overloadingcanoccurifyoufeed

toorapidlyormaketoomany

start/stopsinashorttime.

b. LINEVOLTAGEismore

than10%aboveorbelowthe

nameplatevoltagerating.For

heavyloads,thevoltageatmotor

terminalsmustequalthevoltage

specifiedonthenameplate.

c. IMPROPERordullsawblades

areused.

5. Mostmotortroublesmaybetraced

tolooseorincorrectconnections,

overload,lowvoltageorinadequate

powersupplywiring.Alwayscheck

theconnections,theloadand

supplycircuitifthemotordoesn't

runwell.Checkminimumgaugefor

thelengthofcordyouareusingon

thechartbelow.

GUIDELINESFOREXTENSION

CORDS

Useaproperextensioncord.Make

sureyourextensioncordisingood

condition.Whenusinganextension

cord,besuretouseoneheavyenough

tocarrythecurrentyourproductwill

draw.Anundersizedcordwillcause

adropinlinevoltage,resultingin

lossofpowerandoverheating.The

tablebelowshowsthecorrectsize

tousedependingoncordlengthand

nameplateampererating.Ifindoubt,

usethenextheaviergauge.The

smallerthegaugenumber,theheavier

thecord.

Besureyourextensioncordis

properlywiredandingoodcondition.

Alwaysreplaceadamagedextension

cordorhaveitrepairedbyaqualified

personbeforeusingit.Protectyour

extensioncordsfromsharpobjects,

excessiveheatanddamporwetareas.

Use a separate electrical circuit for

your tools. This circuit must not be

less than a #18 wire with a 9 A time lag

fuse. NOTE: When using an extension

cord on a circuit with a #18 wire, the

extension cord must not exceed 25 feet

in length. Before connecting the tool to

the power line, make sure the switch

is in the OFF position and the electric

current is rated the same as the current

stamped on the motor nameplate,

running at a lower voltage will damage

the motor.

•O" O e'|

(When using 120 volts only)

Ampere Rating Total tength of Cord

More Than Not More Than 25ft. 50ft. 100ft. 150ft.

0 6 18 16 16 14

10 12 16 16 14 12

12 16 14 12 Not Recommended

CAUTION: in all cases make certain

the receptacle in question is

properly grounded, if you are not

sure, have a certified electrician

check the receptacle.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Craftsman Gesehen Handbücher

Craftsman

Craftsman nextec 320.61325 Bedienungsanleitung

Craftsman

Craftsman 315.220381 Bedienungsanleitung

Craftsman

Craftsman 351.228031 Bedienungsanleitung

Craftsman

Craftsman 358.740160 Bedienungsanleitung

Craftsman

Craftsman 113.248340 Bedienungsanleitung

Craftsman

Craftsman 115.244500 Bedienungsanleitung

Craftsman

Craftsman MULTI-MITER 137.242760 Bedienungsanleitung

Craftsman

Craftsman Professional 351.224010 Bedienungsanleitung

Craftsman

Craftsman 881.36505 Bedienungsanleitung

Craftsman

Craftsman 315.216260 Bedienungsanleitung

Craftsman

Craftsman 137.224140 Bedienungsanleitung

Craftsman

Craftsman 5411.3 Bedienungsanleitung

Craftsman

Craftsman 137.322860 Bedienungsanleitung

Craftsman

Craftsman 113.24201 Bedienungsanleitung

Craftsman

Craftsman 21828 - Professional 10 in. Jobsite Saw Bedienungsanleitung

Craftsman

Craftsman 113.298722 Bedienungsanleitung

Craftsman

Craftsman 315.220380 Bedienungsanleitung

Craftsman

Craftsman 124.3299 Bedienungsanleitung

Craftsman

Craftsman 137.375630 Bedienungsanleitung

Craftsman

Craftsman 315.10924 Bedienungsanleitung

Craftsman

Craftsman 113.235300 Bedienungsanleitung

Craftsman

Craftsman 113.241591 Bedienungsanleitung

Craftsman

Craftsman 103.22880 Gebrauchs- und Pflegehandbuch

Craftsman

Craftsman 875.199530 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung