Craftsman CMXGVAM1144043 Leitfaden

778-15657

Using four clevis pins and four cotter pins

from the manual bag, install the labeled

tines onto the tine shaft inner tines first, then

the outer tines and exactly as shown.

A1 A2

B2 B1 A2

Remove the remaining clevis pin and cotter

pin from the manual bag, install the wheel

assembly into the chain case bracket

Remove the two screws

from the bracket in the

chain case. Insert the

horizontal bracket into the

chain case brackets and

secure the depth stake

assembly in place with the

screws just removed

Remove the bolts, washers and nuts from

the chain case bracket. Place the handle into

position and secure with the previously removed

hardware.

Remove the handle

adjustment crank from

the handle. Rotate the

handle upward and

secure it in place with

the handle

adjustment

crank.

When the handle is in place, insert the

clutch cable into the cable guide on the

handle

Tools Required:

• 1/2-inch wrench (or adjustable wrench)

Handle

Tines

Depth Stake

HandleAdjustment Crank

Clutch Lever

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.

Need Help?

www.CRAFTSMAN.com or Call 1-888-331-4569

Fast Start Guide - Assembly

778-15657

The wheels and

depth stake need

to be adjusted

to meet your tilling needs

before operation. Removing

the clevis pin from the chain

case bracket and raise the

wheels to the desired height.

Remove the clevis pin and

cotter pin place the depth

stake in the desired position

and reinstall the hardware.

Disconnect and ground the spark plug

wire against the engine. Adjust the forward

clutch cable if necessary by loosening

the hex nut. Turn the cable collar section one or

two turns to increase or decrease tension on the

cable. Retighten the lock nut against the cable collar.

Reconnect the spark plug wire.

Fill fuel tank with clean, fresh

gasoline until fuel reaches the fuel

level indicator.

Pour the entire contents of the

oil bottle (included in carton)

into the oil fill.

Move throttle control into the

Fast position.

Move the choke control

into the Choke position.

Grasp starter rope handle

and pull with quick, full-arm stroke.

When engine starts, slowly move choke

control into the Run position.

Gas Cap

Throttle

Control

Starter Rope

Handle

Choke

Control

Oil Fill

710

811

912

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.

Need Help?

www.CRAFTSMAN.com or Call 1-888-331-4569

Fast Start Guide - Engine Start

Andere Handbücher für CMXGVAM1144043

Dieses Handbuch passt für folgende Modelle

Andere Craftsman Pinne Handbücher

Craftsman

Craftsman 917.291491 Bedienungsanleitung

Craftsman

Craftsman 917.299062 Bedienungsanleitung

Craftsman

Craftsman 316.29271 Bedienungsanleitung

Craftsman

Craftsman 917.293302 Bedienungsanleitung

Craftsman

Craftsman 917.297043 Bedienungsanleitung

Craftsman

Craftsman C210 Bedienungsanleitung

Craftsman

Craftsman 917.292493 Bedienungsanleitung

Craftsman

Craftsman Sears 944.629662 Bedienungsanleitung

Craftsman

Craftsman 486.252443 Bedienungsanleitung

Craftsman

Craftsman 917.298022 Bedienungsanleitung

Craftsman

Craftsman 486.24338 Bedienungsanleitung

Craftsman

Craftsman 247.299340 Bedienungsanleitung

Craftsman

Craftsman 536.292524 Bedienungsanleitung

Craftsman

Craftsman 917.294250 Bedienungsanleitung

Craftsman

Craftsman 917.297020 Bedienungsanleitung

Craftsman

Craftsman 917.297030 Bedienungsanleitung

Craftsman

Craftsman 486.242051 Bedienungsanleitung

Craftsman

Craftsman 29748 Bedienungsanleitung

Craftsman

Craftsman 917.292350 Bedienungsanleitung

Craftsman

Craftsman 316.292601 Bedienungsanleitung

Craftsman

Craftsman 917.298021 Bedienungsanleitung

Craftsman

Craftsman 944.629541 Bedienungsanleitung

Craftsman

Craftsman C459.62103-2 Bedienungsanleitung

Craftsman

Craftsman 917.293301 Bedienungsanleitung

Beliebte Pinne Handbücher anderer Marken

MTD

MTD 410R Bedienungsanleitung

MTD

MTD FRT Series Bedienungsanleitung

Troy-Bilt

Troy-Bilt Colt FT Bedienungsanleitung

Ryobi

Ryobi 510r Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

YAT

YAT YT5601-01 Wartungshandbuch

Troy-Bilt

Troy-Bilt OEM-290-260 Bedienungsanleitung

Scheppach

Scheppach MTP560 Montageanleitung

GARDEN WAY

GARDEN WAY 12194 Bedienungsanleitung

Classen

Classen STAND-AER SA-25 Montage- und Wartungsanleitung

DR PILOT 2 Kurzanleitung

Altrad

Altrad ATIKA BH 1400 N Leitfaden

WIL-RICH

WIL-RICH 2500 Bedienungsanleitung

Viking

Viking HB 685 Bedienungsanleitung

SMASH

SMASH TLG415 Bedienungsanleitung

FarmBoy

FarmBoy FB-IC-209P Bedienungsanleitung

Mantis

Mantis SV-5C/2 Bedienungsanleitung

Wen

Wen TC1014 Bedienungsanleitung