Crane Electronics Wrenchstar Multi Bedienungsanleitung

Crane Electronics Ltd

The force in torque management

Operators Manual

WRENCHSTAR MULTI

Manual 1230-01 Issue 1

Crane Electronics Ltd

NOTICE

without the prior permission in writing from Crane Electronics Ltd is forbidden.

Crane Electronics Ltd

The force in torque management

Contents 2

CE Marking / Compliance 3

Product Disposal / About this Manual 4

Packing List / Spares /Care 5

Features and Dimensions / Overview WrenchStar Multi 6

Specifications 7

Main Functions and Features of WrenchStar Multi / Batteries 8

Warnings / Battery Warnings 9

Charging the WrenchStar Multi / WrenchStar Multi Button 10

Diagnostic Mode / Power on Sequence 11

Light Ring / ID Heads / Adapter Length Compensation 12

Battery Charge Status / Wrench Status LED / Vibrator 13

IQVu Setup with a WrenchStar Multi 14

Pairing the WrenchStar Multi 17

Loading Jobs 20

CONTENTS

Manufacturer:

Crane Electronics Ltd

Address:

3 Watling Drive

Sketchley Meadows

Hinckley

Leicestershire

LE10 3EY

Tel:

+44 (0)1455

Declares that this product has been assessed and complies with the requirements of

Directives.

Changes or modifications to the

could void

the user’s authority to operate the equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause u

This equipment has been tested and found to comply with the limits for a Class

part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the eq

uipment is operated in a

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interfe

rence to radio communications.

interference will not occur,

in a particular installa

radio or television reception, which can be determined by turning the equipment off and on, the user is

encourage

d to try to correct the interference by one or more of the following measures:

•Reorien

t or relocate the receiving antenna.

•

Increase the separation between the equipment

•

Connect the equipment into an outlet on a circuit different from that to

connected.

•

Consult the dealer or an experienced radio/TV technician to help.

CE MARKING

COMPLIANCE

Crane Electronics Ltd

3 Watling Drive

Sketchley Meadows

Hinckley

Leicestershire

LE10 3EY

+44 (0)1455

25 14 88

Declares that this product has been assessed and complies with the requirements of

Changes or modifications to the

WrenchStar Multi

not expressly approved by Crane Electronics Ltd

the user’s authority to operate the equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause u

ndesired operation.

This equipment has been tested and found to comply with the limits for a Class

digital device, pursua

These limits are designed to provide reasonable protection against harmful

uipment is operated in a

residential

environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

rence to radio communications.

However, there is

in a particular installa

tion.

If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is

d to try to correct the interference by one or more of the following measures:

t or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is

Consult the dealer or an experienced radio/TV technician to help.

Crane Electronics Ltd

The force in torque management

Declares that this product has been assessed and complies with the requirements of

the relevant CE

not expressly approved by Crane Electronics Ltd

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

digital device, pursua

nt to

These limits are designed to provide reasonable protection against harmful

environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

no guarantee that

If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is

d to try to correct the interference by one or more of the following measures:

which the receiver is

Crane Electronics Ltd

The force in torque management

Applicable in the EU and other European Countries with separate collection systems

The symbol shown here and on the product means that the product is classed as Electrical or

Electronics Equipment and should not be disposed with normal commercial waste at the end of its

working life.

The Waste of Electrical and Electronics Equipment (WEEE) Directive (2002/96/EC) has been put in place to

recycle products using best available recovery and recycling techniques to minimise the impact on the

environment, treat any hazardous substances and avoid the increasing landfill.

For more detailed information about recycling of this product please contact your local authority or the

Company where you have purchased the product.

Battery pack disposal to take place in line with the AMENDED BATTERIES DIRECTIVE 2013/56/EU.

In Countries outside the EU:

If you wish to discard this product, please contact your local authorities and ask for the correct way of

disposal.

This manual covers the WrenchStar Multi communicating with an IQVu.

For information on torque transducers or PC software to be used in conjunction with IQVu, please refer to

Corresponding manuals accordingly.

Actual screen shots represented in this manual may differ slightly from those within the IQVu app

depending on version

For information on the operation of an IQVu please refer to its own manual.

Software Version of IQVu app =

Software Version of Torque Module = a) Main processor: 160_vx.x

b) RF processor: 162_vx.x

Software Version of TCI = a) Main processor: 184_vx.x

b) RF processor: 162_vx.x

Software Version of WSM = a) Main processor: 182_vx.x

b) RF processor: 161_vx.x

PRODUCT DISPOSAL

ABOUT THIS MANUAL

Crane Electronics Ltd

The force in torque management

The following items are supplied with the WrenchStar Multi dependant on model specification purchased.

1 x WrenchStar Multi

1 x User Manual (USB)

1 x Quick Start Guide (USB)

1 x Calibration Certificate

Please ensure all items are present and notify Crane Electronics Ltd immediately of any shortages.

DIN Adaptor

Battery Pack

Charging Cradle + Power Supply Unit

Charger

Cable

Operating temperature range -20 to +50 degrees C

Storage temperature range -20 to +50 degrees C

Humidity 10-75% non-condensing

IP Rating IP40 (indoor use only)

The WrenchStar Multi may be wiped clean with a soft cloth.

PACKING LIST

CARE AND STORAGE

SPARES

AND ACCESSORIES

Crane Electronics Ltd

The force in torque management

Size (Nm)

Length

(mm)

(excludes

adaptor) Mass (g)

10 380.3 832

25 380.3 839

75 395.3 926

180 613.3 1494

340 788.3 1956

500 866.5 3500

750 1178.3 5360

Battery

Pack

108.6

The WrenchStar Multi is a wireless production and quality audit wrench which works with the IQVu or TCI.

There is a variant that works with a cable connected to the IQVu. In this case there is no battery pack or RF.

The power comes from the IQVu and the Torque and Angle data are transmitted as digital signals along the

cable to the IQVu.

The WrenchStar Multi reads the Torque and Angle values in real time and converts them to digital values.

The WrenchStar Multi analyses the digital samples using measurement algorithms to calculate properties of

the fastening such as Peak. The WrenchStar Multi communicates the final fastening readings to an IQVu

using RF giving a range of approximately 10m

. If the WrenchStar Multi loses its link to the IQVu, then it

continues to work offline, storing up to 200 readings. It is very easy to pair, (associate the connection), of a

WrenchStar Multi with a particular IQVu.

The WrenchStar Multi contains its own power source which is a Lithium Ion battery pack.

* The RF range depends on the environment in which the WrenchStar Multi and IQVu are being used and

the figure quoted is for a relatively metal free work space with the IQVu in line of sight of the WrenchStar

FEATURES AND DIMENSIONS

OVERVIEW

–

WRENCHSTAR MULTI

Crane Electronics Ltd

The force in torque management

Multi.

Physical Measurement: Bi-directional torque and angle, and pulse count

Measurement Modes: Peak Capture of highest torque value during the cycle

Move On Capture of move on point torque during auditing of tightened joint.

Yield Special measurement algorithm for use with joints being taken into

plastic region.

The Wrench supplies its Torque Range (span), PPR (for angle), serial number,

Calibration due date.

Reading Storage: The WrenchStar Multi can store up to 200 readings in offline mode.

LEDs: The WrenchStar Multi has a:

Charge LED used when charging battery pack.

Status LED

Light ring for fastening status.

Torque Measurement: Resolution to 0.006% of transducer span

Sampled every 60 micro-seconds (16,667) per second

Zero Stability: < 0.1% FSD / °C

Static Accuracy: +/-0.25% FSD

Angle Measurement: Sample every 1000 micro-seconds (1,000) per second

Frequency Response: A low pass Bessel Filter is employed for conditioning the transducer signal to

‘eliminate noise’ from the tool measurement

Selectable from 75Hz to 4608Hz

Readings: Readings are organised into subgroups.

Battery Pack: Re-chargeable Lithium Ion battery.

Capacity 2600mAh

3.7V

Weight 108.6g

Useable battery life of 10 hours with normal usage

Communication: Communicates with an IQVu using 2.400GHz RF

Warranty: 1 year manufacturer’s warranty

Display: OLED 32 x 128 pixels white

SPECIFICATIONS

Crane Electronics Ltd

The force in torque management

Serial number is on back.

The

The WrenchStar Multi unit has a battery pack that contains a Lithium Ion battery. From fully discharged the

unit will require up to a 4 hour charge to attain maximum capacity.

The full capacity of the battery is 2600mAh which yields approx. 10 hours of normal use.

When a WrenchStar Multi is placed in charging cradle, the charge indicator LED will illuminate with colour

according to the charge status.

MAIN FUNCTIONS AND FEATURES OF THE

WRENCHSTAR MULTI

Handle

Light Ring

Button

Status

LED

Charge

LED

BATTERIES

OLED

display

End Cap

Din adapter

Battery pack

Crane Electronics Ltd

The force in torque management

Charge Indicator LED Status

Red = Charging

Green = Charged

Off = no charging

Maintain unit with care. Keep unit clean for better and safer performance.

Changes or modifications to the WrenchStar Multi not expressly approved by Crane Electronics

Ltd could void the user’s authority to operate the equipment.

Always operate WrenchStar Multi with approved battery pack.

Always operate, inspect and maintain this unit in accordance with all regulations (local, state,

federal and country) that may apply.

Do not remove any labels.

Always use Personal Protective Equipment appropriate to the tool used and material worked.

Keep body stance balanced and firm. Do not overreach when operating with the tool. Anticipate

and be alert for sudden changes in motion, reaction torque, or forces during the operation.

Ensure work pieces are secure. Use clamps or vices to hold work pieces whenever possible.

Never use a damaged or malfunctioning tool or accessory with this unit.

Follow instructions for changing accessories.

Do not operate this product in explosive atmospheres, such as in the presence of flammable

liquids, gases or dust.

This unit contains no user serviceable parts. Only qualified service personnel should replace or fit

parts.

Charge the WrenchStar Multi before use.

Only charge the WrenchStar Multi in specified cradle.

Keep battery pack terminals clean.

Always store the battery pack in a dry place.

Do not short circuit the battery pack.

Do not disassemble the battery pack.

Do not expose the battery pack to high temperature.

WARNINGS

BATTERY WARNINGS

Crane Electronics Ltd

The force in torque management

The wrench can be charged by inserting into the charging cradle.

Note: alternative charging methods may become available in the future.

The WrenchStar Multi will monitor its battery level. If the battery level goes below 10% the status LED will

flash blue. If the status LED starts flashing it is recommended that the readings are immediately finished and

the WrenchStar Multi taken back to the IQVu to upload any remaining readings. The WrenchStar Multi

should be fully charged in a cradle before using. If the level goes to 0% the WrenchStar Multi will switch

OFF.

Charger voltage is 5V.

The WrenchStar Multi button has several functions:

•When the WrenchStar Multi is OFF pressing the button for less than 1s will turn the WrenchStar

Multi ON.

•When the WrenchStar Multi is ON and the button is pressed for approx. 2s the WrenchStar Multi will

go into pairing mode and the status LED will change to purple.

•If the WrenchStar Multi is in pairing mode pressing the button will take the WrenchStar Multi back to

normal RF mode and the status LED will change to blue.

•If the WrenchStar Multi is ON and the button is held for more than 5s then the WrenchStar Multi will

switch OFF.

The WrenchStar Multi will switch OFF after 10 minutes of no activity. It can be turned back ON with a press

of the button. No activity means no torque messages from the IQVu and no torque pulled.

CHARGING THE WRENCHSTAR MULTI

WRENCHSTAR MULTI BUTTON

Andere Handbücher für Wrenchstar Multi

Inhaltsverzeichnis

Andere Crane Electronics Elektrowerkzeuge Handbücher

Crane Electronics

Crane Electronics WrenchStar Mult Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch