Create STUDIO Bedienungsanleitung
USER MANUAL
MILK FROTHER AND HEATER
ESPUMADOR Y CALENTADOR DE LECHE
MILK FROTHER
STUDIO
4
INDEX
ENGLISH
Security instructions 6
Before rst use 7
Parts list 8
Instructions for use 8
Mode selection 9
Use tips 10
Problem resolution 11
Cleaning and maintenance 12
ESPAÑOL
Instrucciones de seguridad 13
Antes del primer uso 14
Listado de partes 15
Instrucciones de uso 15
Selección de modo 16
Consejos de uso 17
Resolución de problemas 18
Limpieza y mantenimiento 19
PORTUGUÊS
Instruções de segurança 20
Antes do primeiro uso 21
Lista de peças 22
Instruções de uso 22
Seleção de modo 23
Use dicas 24
Resolução de problemas 25
Limpeza e manutenção 26
FRANÇAIS
Consignes de sécurité 27
Avant la première utilisation 28
Liste des pièces 29
Mode d'emploi 29
Sélection de mode 30
Conseils d'utilisation 31
Résolution des problèmes 32
Nettoyage et entretien 33
MILK FROTHER
STUDIO
5
ITALIANO
Istruzioni di sicurezza 34
Prima del primo utilizzo 35
Elenco delle parti 36
Istruzioni per l'uso 36
selezione della modalità 37
Usa suggerimenti 38
Risoluzione del problema 39
Pulizia e manutenzione 40
DEUTSCH
Sicherheitshinweise 41
Vor dem ersten Gebrauch 42
Liste der Einzelteile 43
Gebrauchsanweisung 43
Modusauswahl 44
Tipps nutzen 45
Problemlösung 46
Reinigung und Instandhaltung 47
NEDERLANDS
Beveiligingsinstructies 48
Voor het eerste gebruik 49
Onderdelen lijst 50
Gebruiksaanwijzing 50
Mode selectie 51
Gebruik tips 52
Probleem oplossing 53
Schoonmaak en onderhoud 54
POLSKI
Instrukcje bezpieczeństwa 55
Przed pierwszym użyciem 56
Lista części 57
Instrukcja użycia 57
Wybór trybu 58
Użyj wskazówek 59
Rozwiązanie problemu 60
Czyszczenie i konserwacja 61
INDEX
MILK FROTHER
STUDIO
ENGLISH
6
Thank you very much for choosing our milk frother. Before using this product, carefully read the
instructions for its correct use.
The included safety precautions reduce the risk of electric shock, injury, and even death if strictly fol-
lowed. Keep this manual in a safe place for future reference, together with theduly completed product
warranty card, the original product packaging, and proof of purchase. If possible, pass these instruc-
tions on to the next owner of the appliance. Always observe basic safety precautions and accident
prevention rules when using an appliance. We decline any responsibility derived from the breach of
these instructions by the clients.
ENGLISH
SECURITY INSTRUCTIONS
The use of electrical appliances requires basic safety precautions. Please read
all instructions carefully.
•
Check that all parts of the product are in good condition before using it. If you
nd damage to the power cord, do not use the frother and contact technical
support.
•
Use the skimmer out of the reach of children. As the foamer and stirrer at-
tachments are small, please store them in a safe place to prevent them from
being lost or accidentally swallowed by children.
•
Unplug the product after use, when replacing accessories, or when cleaning.
•
Do not immerse the appliance, power cord or plug in water or any other liquid.
Do not wash the appliance in the dishwasher.
•
Do not place the appliance on a hot surface, such as a stovetop, or use it near
heat sources.
•
See manual for capacity instructions. The liquid volume should not exceed
the inside capacity mark as it will spill.
•
Use the product on a at and dry surface. Suitable for home use only. It is not
recommended for use in commercial or industrial settings.
•
Do not use the milk frother outdoors or on uneven surfaces.
•
Keep the appliance and its cord out of the reach of children.
•
Do not touch the metal parts or the whisk attachment while the frother is in
operation.
ENGLISH 7
•
The user is ultimately responsible for their own safety. Children or persons
with physical disabilities, low perceptual abilities or mental disabilities
should not use this product unless they are supervised or have prior knowl-
edge of its use.
•
Close the lid properly and do not touch it while the frother is in use, to avoid
burns if it spills due to misuse.
•
This appliance comes with a separate power base. It will automatically turn
off as soon as the appliance is removed from the base.
•
The appliance should only be used with the supplied power base.
•
This appliance is not intended to be used with an external timer or separate
remote control system.
•
Accessible surfaces can reach high temperatures during appliance opera-
tion. Always hold the appliance by the handle when in use and until it has
cooled down.
•
Do not turn on the frother without rst adding milk or it could cause over-
heating or dry burning of the product. It is considered dry burning when the
temperature is higher than 115 °C. The dry-burn protection will activate after
a continuous beep and the skimmer will stop. If you want to restart it, wait for
it to cool down before using it again.
•
After power on, if all the indicator lights come on for one second and there is
no response, the power base may not be making good contact. You can rotate
the frother to check if it has properly connected with the base.
BEFORE FIRST USE
• Open the packaging, save all the necessary information in it, take out the milk frother and con-
nect it to the power supply to check if it works properly.
• Please read the instructions carefully to check whether the accessories are complete.
• Clean the skimmer accessories before using it for the rst time in accordance with the cleaning
and maintenance regulations.
ENGLISH
8
PARTS LIST
CONTROL PANEL
1. Transparent lid
2. Mixer accessories
3. Skimmer Accessories
4. Non-stick jug
5. Grab handle
6. Touch control panel
7. Power base
8. Hot foam button
9. Milk heating button
10. Cold foam button
11. Hot chocolate button
12. On/Off button
1
5
4
6
7
8
10
12
9
11
2
3
1. Connect the power supply with the power base and pour the milk into the milk frother. Please
note that the amount of milk poured must not exceed the mark (see maximum capacity).
2.Connect the main body with milk to the power base and hear the sound of “D”. The four function-
al indicator lights will all be on for 1 second and then turn off in the non-operation condition. It
goes into the standby state, indicating that the power is on.
3.Choose the function mode you want. After the set time haselapsed for the mode you choose, the
frother will stop and the frother will go into standby mode.
4.Cancel the selection. If you need to cancel the selection, you can press the button once while
the skimmer is running.
5.After canceling the selection the lights will turn on. At this time, you can select any function
button to continue using the frother. If you do not select any button for 10 seconds, the frother
will automatically enter the standby state.
INSTRUCTIONS FOR USE
ENGLISH 9
Hot foam.
• In the standby state, press the key gently once and the warning tone “D” will sound. All
four function indicator lights will be on.
• Press the button and the indicator light will ash for 2 seconds. Then the indicator light
for the hot foam function will come on. and the other three functional indicators go out.
• After the work is completed, the device will sound “D” and the indicator light it will power
off and stop working to return to standby status.
• Note. The whole working time is automatically adjusted according to the added milk capacity
and original milk temperature. When the work is completed, the milk is in the bubble state
and the temperature is about 60ºC.
Heat milk.
• In standby mode, press the key gently once and the warning tone “D” will sound. All four
function indicator lights will be on.
• Then press the button and the mode will work after the indicator light ashes for 2 sec-
onds.
• Then the indicator light for the hot foam function will come on. and the other three oper-
ating indicator lights will turn off.
• After completing the work, the device will sound “D” and the indicator light it will power
off and stop working to return to standby status.
• Note. The whole working time is automatically adjusted according to the added milk capacity
and original milk temperature. When the work is completed, the milk is in the bubble state
and the temperature is about 60ºC.
Cold foam.
• In standby mode, press the key gently once and the warning tone “D” will sound. All four
function indicator lights will be on.
• Then press the button of the normal temperature frothing function and the frother will
start working after the indicator light ashes for 2 seconds.
• Then the indicator light for the frothing function will come on at cold foam. and the other
three operating indicator lights go out.
• After completing the work, the device will sound “D” and the indicator light it will power
off and stop working to return to standby status.
• Note. All the working time is automatically adjusted according to the added milk capacity
and the original temperature of the added milk. When the work is completed, the milk is in
the state of milk bubble, and the temperature will be normal.
MODE SELECTION
ENGLISH
10
Hot chocolate.
• In standby mode, press the key gently once and the warning tone “D” will sound. All four
function indicator lights will be on.
• Then press the button of the hot chocolate function once and it will work after the indi-
cator light ashes for 2 seconds.
• Then the indicator light for the hot chocolate function will come on. and the other three
operating indicator lights will turn off.
• After completing the work, the device will sound “D” and the indicator light it will power
off and stop working to return to standby status.
• Note. All the working time is automatically adjusted according to the added milk capacity
and the original temperature of the added milk. When the work is completed, the milk will be
in the bubble state and the approximate temperature will be 70ºC.
MODE ACCESSORY ABILITY WEATHER END TEMPERA-
TURE
Hot foam MAX: 160ml 100-120 sec 60ºC (±5°C)
Heat milk MAX: 350 ml 120 - 160 sec 60ºC (±5°C)
Cold foam MAX: 160 ml 60-70 sec Room temperature
Heat chocolate milk MAX: 350 ml 160 - 200 sec 70ºC (±5°C)
USE TIPS
The following tips for use will help you obtain optimal milk foam:
• Check if there is any dirt on the skimmer before using it.
• Use whole milk for best foam results.
• Add the milk before turning on the frother to avoid dry burning or overheating as this may cause
malfunction.
• Heat and froth the milk rst. Then prepare the coffee or hot chocolate as soon as the frother
starts to work.
• The frother can turn milk at room temperature into foam (with the cold froth function, for ex-
ample), but this does not mean that the foam will be cold, since during the frothing process the
temperature rises a little.
• The optimum temperature for heating milk is between 60 and 70 °C. Not only will this not destroy
the molecular structure and nutritional content of the milk, but it also improves the avor with-
out having to wait too long.
• After each use, clean the milk frother and its accessories with cold water and dry them with a
dry cloth.
Andere Handbücher für STUDIO
2
Inhaltsverzeichnis
Sprachen:
Andere Create Küchengerät Handbücher
Create
Create VEGAN MILK MAKER Bedienungsanleitung
Create
Create WINE OPENER Bedienungsanleitung
Create
Create PRO 97911-192454 Bedienungsanleitung
Create
Create RETRO M Bedienungsanleitung
Create
Create WINECOOLER XL Bedienungsanleitung
Create
Create CHEFBOT TOUCH Bedienungsanleitung
Create
Create B-LIFE SMART Bedienungsanleitung
Create
Create STONE 3 IN 1 STUDIO Bedienungsanleitung
Create
Create STUDIO Bedienungsanleitung
Create
Create WARM TOWEL TOOL Bedienungsanleitung
