Creative Structures Hexadome L Bedienungsanleitung
1 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Installation
Version 3.1
3 | 322 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
CS-0551
Sub frame
center
CS-0560
Foot connector
Left
1x
6x
6x
6x
18x
6x
6x
6x
6x
12x
6x
6x
3x36x 40x 140x 190x
6x
6x
12x
6x
12x
6x
12x
CS-0539
Sub frame beam
ø90 mm - 149 cm
CS-0561
Foot connector
Right
CS-0540
Upper main
prole ø125 mm - 157 cm
CS-0593
Anchor slide
CS-0541
Upper
X-connector
CS-0562
Anchor support
CS-0543
T- Connector Upper Left
Marked with “UL”
CS-0549
Tension cable
CS-0537
Upper (long)
sub prole ø90 mm - 233 cm
CS-0235
Positioning
cable
CS-9041
Rope 33 m.
CS-0536
Lower Main
prole ø125 mm - 277 cm
CS-0093
Locking pin (medium)
ø90 mm prole
CS-9039
Locking pin (large)
ø125 mm prole
CS-0542
Lower
X-connector
CS-0590
Ratchet plate
CS-9058
Turn buckle
CS-0544
T- Connector Lower Left
Marked with “LL”
CS-0547
Upper cable
CS-0546
T- Connector Lower Right
Marked with “LR”
CS-0548
Center cable
Hexadome Large
BOX CONTENTS
CS-0248
Securing ring
6x
6x
CS-0538
Lower (short)
sub prole ø90 mm - 130 cm
CS-0545
T- Connector Upper Right
Marked with “UR”
6x CS-0558
Sub frame
connector
6x CS-0559
Locking strip
6x CS-0594
Pull bar large
1x CS-0614
Transport
rack & 2x box
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏ ❏ ❏ ❏ ❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
L
24x
❏CS-9059
Carabiner
5 | 324 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
Pre-assemble the lower sub proles (6x) Pre-assemble the upper sub proles (6x)
STEP 1 STEP 2
! Curvature has to point backwards
LL
LR
Lower (short) sub prole
CS-0538
T-Connector Lower Right
Marked with “LR”
CS-0546
T-Connector Lower Left
Marked with “LL”
CS-0544
Locking pin
Short version
CS-0093
2x
Securing ring
CS-0248
2x
Upper (long) sub prole
CS-0537
T-Connector Upper Right
Marked with “UR”
CS-0545
T-Connector Upper Left
Marked with “UL”
CS-0543
UL
UR
Locking pin
Short version
CS-0093
2x
Securing ring
CS-0248
2x
! Curvature has to point backwards
7 | 326 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
Pre-assemble the sub frame Assemble the frame body
STEP 3 STEP 4
! Secure all parts with locking pins
(short version) and securing rings
Sub frame center
CS-0551
Sub frame beam
CS-0539
6x
Sub frame connector
CS-0558
6x
Upper main prole
CS-0540
4x
Upper X-connector
CS-0541
3x
Upper X-connector
CS-0541
3x
Upper main prole
CS-0540
2x
! Curvature has to point upwards ! Secure all parts with locking pins
(long version) and securing rings
! Hooks have to point inwards
9 | 328 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
! Secure all parts with locking pins
(long version) and securing rings Mount the sub frame at the frame body
STEP 5
Locking strip
CS-0559
6x
Securing ring
CS-0248
6x
11 | 3210 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
! Note: this lifting methode
requires more height for building
LIFTING
While building, the structure has to be lifted multiple times so that the assembly can easily be done on oor level.
The structure is designed for two lifting methods:
1. Lifting from below (for example with a traverse lift) by using the subframe. Requirements lifting device:
• minimum lifting height: 7,5 meter
• minimum save working load: 1200kg (without suspended loads)
2. Lifted from the top (for example with a crane ) by using lifting slings (2 meter, 1000 KG) and the hook
of the X-connectors
Assemble the remaining upper main proles and Lower X-connectors
STEP 6
Upper main prole
CS-0540
Lower X-connector
CS-0542
Upper main prole
CS-0540
!
!
Rotate prole clockwise to
create space for assembly
Do not secure yet
13 | 3212 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
! Secure all parts with locking pins
(long version) and securing rings
Repeat this step for the other ve sides
! Rotate prole counter clockwise
and push the X-connector slowly
in the proles
Upper cable
CS-0547
12x
Mount the rst end of the upper cables
STEP 7
! Use the two inner eyes of the X-connector
15 | 3214 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
Mount the rst end of the 12 center cables Mount the rst end of the center cables
STEP 8 STEP 9
Center cable
CS-0548
12x
Lower main prole
CS-0536
12x
! Secure all parts with locking pins
(long version) and securing rings
17 | 3216 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
Mount the upper sub proles (6x) Mount the second end of the 12 upper cables
STEP 10 STEP 11
UL
UR
!
!
!
Curvature sub proles
has to point inwards
Secure all parts with locking pins
(long version) and securing rings
When crossing other cables, place the cable
above the rst crossing cable and below
the next crossing cable(s)
19 | 3218 | 32
Hexadome L
Building instructions
www.creative-products.nl
Hexadome L
Building instructions
www.creative-products.nl
Mount the rst end of the 12 tensioning cables Mount the second level of main proles
STEP 12 STEP 13
Tensioning cable
CS-0549
12x
Lower main prole
CS-0536
12x
! Secure all parts with locking pins
(long version) and securing rings
Andere Handbücher für Hexadome L
1
Inhaltsverzeichnis
Andere Creative Structures Zelt Handbücher
Creative Structures
Creative Structures Crossover L Montageanleitung
Creative Structures
Creative Structures Crossover L Bedienungsanleitung
Creative Structures
Creative Structures Hexadome L Bedienungsanleitung
Creative Structures
Creative Structures Crossover L Bedienungsanleitung
Creative Structures
Creative Structures Lounger M Bedienungsanleitung
Creative Structures
Creative Structures CROSSOVER M Bedienungsanleitung
