Creative Hexadome M Bedienungsanleitung
www.creativestructures.nl
Building instructions Hexadome M
Version 1.0
Building instructions Hexadome M
Page 1
www.creativestructures.nl
Pre-assemble the lower sub proles (6x)
Step 1:
LL
LR
Curvature has to point backwards
!
Lower (short) sub prole
CS-0464
T-Connector Lower Right
Marked with “LR”
CS-0472
T-Connector Lower Left
Marked with “LL”
CS-0469
Locking pin
Short version
CS-0105
2x
Securing ring
CS-0248
2x
Building instructions Hexadome M
Page 2
www.creativestructures.nl
Pre-assemble the upper sub proles (6x)
Step 2:
Upper (long) sub prole
CS-0463
T-Connector Upper Right
Marked with “UR”
CS-0471
T-Connector Upper Left
Marked with “UL”
CS-0468
UL
UR
Curvature has to point backwards
!
Locking pin
Short version
CS-0105
2x
Securing ring
CS-0248
2x
Building instructions Hexadome M
Page 3
www.creativestructures.nl
Pre-assemble the sub frame
Step 3: Secure all parts with locking pins (short version)
and securing rings
!
Sub frame center
CS-0447
Sub frame beam
CS-0465
6x
Sub frame connector
CS-0336
6x
Building instructions Hexadome M
Page 4
www.creativestructures.nl
Upper main prole
CS-0460
4x
Upper X-connector
CS-0466
3x
Hooks have to point inwards
!
Curvature has to point upwards
!
Assemble the frame body
Step 4: Secure all parts with locking pins (long version)
and securing rings
!
Upper X-connector
CS-0466
3x
Upper main prole
CS-0460
2x
Building instructions Hexadome M
Page 5
www.creativestructures.nl
Secure all parts with locking pins (long version)
and securing rings
!
Building instructions Hexadome M
Page 6
www.creativestructures.nl
Mount the sub frame at the frame body
Step 5:
Locking strip
CS-0337
6x
Securing ring
CS-0248
6x
Building instructions Hexadome M
Page 7
www.creativestructures.nl
While building, the structure has to be lifted multiple times so that the assembly can easily be done on oor level.
The structure is designed for two lifting methods:
1. Lifting from below (for example with a traverse lift) by using the subframe. Requirements lifting device:
• minimum lifting height: 6 meter
• minimum save working load: 500kg
2. Lifting from above (for example with a crane) by using lifting slings (2 meter, 1000 KG) and the hooks of the
X-connectors
Lifting:
Note: this lifting methode requires more
height for building
!
Building instructions Hexadome M
Page 8
www.creativestructures.nl
Assemble the remaining upper main proles and Lower X-connectors
Step 6:
Upper main prole
CS-0460
Lower X-connector
CS-0467
Upper main prole
CS-0460
Rotate prole clockwise to
create space for assembly
!
Do not secure yet
!
Building instructions Hexadome M
Page 9
www.creativestructures.nl
Rotate prole counter clockwise
and push the X-connector slowly in the proles
!
Secure all parts with locking pins (long version)
and securing rings
!
Repeat this step for the other ve sides
Andere Handbücher für Hexadome M
1
Andere Creative Zelt Handbücher
