CreativeStar Artemis TI-CS-T1 Bedienungsanleitung

Artemis TI-CS-T1

Thermal Scanner

Product By:

CreativeStar Solutions 1601

Trapelo Road Suite 260 Waltham,

02451

Version: 1.0.3

Issue Date: 20200616

N O T I C E

•In order not to cause malfunction or even damage the device please

do not direct the lens towards strong high-temperature radiation

source (such as the sun) whether the power is on or off!

•Avoid violent shock and impact during operation or transport.

•Storage temperature is between -40°C (-40°F) and 70°C (158°F).

The device must be kept in original packing case during transport.

•Typical storage place is cool, dry, ventilated, and without strong

electromagnetic field.

•Keep the lens surface off grease or any chemical substance which

would damage the lens. Close the lid after operation.

•Please regularly back up data to prevent potential data loss.

•Please regularly format the internal flash memory to make sure it

operates normally.

DO NOT OPEN OR EXCHANGE PARTS!

REPAIRS CAN ONLY BE PERFORMED BY STAFF!

WARNING

1. PRODUCT SUMMARY................................................................................. 1

2. BATTERY AND CHARGER ............................................................................ 2

2.1 CHARGING BATTERY .........................................................................................2

2.2 DIRECT CHARGING ...........................................................................................2

2.3 ATTENTION FOR USING BATTERY CHARGER...........................................................2

3. PANEL FUNCTION SUMMARY..................................................................... 3

3.1 MAIN CONTROL PANEL .....................................................................................3

3.2 SIDE VIEW......................................................................................................5

3.3 BOTTOM VIEW ................................................................................................6

3.4 LEFT SIDE VIEW ...............................................................................................6

4. QUICK START REFERENCE........................................................................... 7

4.1 BATTERY SETTING ............................................................................................7

4.2 QUICK OPERATIONS .........................................................................................7

4.3 MEASURE TARGET TEMPERATURE.......................................................................8

4.4 INFRARED IMAGE AND VOICE ANNOTATION ..........................................................8

4.5 INFRARED IMAGE PLAYBACK...............................................................................9

5. OPERATION MENU .................................................................................. 10

5.1 DISPLAY SUMMARY ........................................................................................10

5.2 MAIN MENU ................................................................................................11

5.2.1 File .....................................................................................................13

Image Management...........................................................................................13

Save....................................................................................................................14

Record & Play .....................................................................................................15

Delete.................................................................................................................15

Format................................................................................................................16

5.2.2 Measure ............................................................................................17

Spot Measure.....................................................................................................17

Line Measure......................................................................................................19

Vertical Line Measure ........................................................................................20

Area (Rect) Measure ..........................................................................................21

Parameters.........................................................................................................22

Save Setting........................................................................................................23

Table of Contents

5.2.3 Image ................................................................................................23

Image Setup .......................................................................................................24

Analysis Setup ....................................................................................................26

Image Reverse....................................................................................................27

Clear Screen .......................................................................................................27

Image Auto/Manual Mode.................................................................................27

5.2.4 Setup .................................................................................................27

System Setup......................................................................................................27

Storage Medium.................................................................................................29

Time & Date .......................................................................................................30

Factory Default...................................................................................................30

System Information............................................................................................32

Disc Information.................................................................................................32

6. HUMAN BODY TEMPERATURE MEASUREMENT CASES ............................. 33

7. TECHNICAL SPECIFICATIONS..................................................................... 35

8. TECHNICAL SUPPORT ............................................................................... 38

APPENDIX: EMISSIVITY OF RAW MATERIALS ................................................ 39

1. Product Summary

Artemis TI-CS-T1 is a specially designed infrared human body

temperature measurement camera, which has the characteristics

of accurate temperature measurement, real-time imaging,

automatic high temperature tracking, fast aiming, etc. It can be

used for human body temperature measurement in public places,

in order to prevent the spread of disease. It is lightweight, easy to

carry and easy to use.

Artemis TI-CS-T1 integrates advanced features such as color

thermal imaging, multiple measurement methods, real-time video,

voice annotation, sound and color alarms, built-in flash memory

and SD card storage.

2. Battery and Charger

It is recommended to charge battery immediately when the device

indicates low power. For detailed information on how to change a

battery, please refer to Section 4.1 Battery Setting on page 7.

The device is equipped with two sets of lithium-ion batteries and a

battery charger. It is strongly recommended that you only use the

original batteries and charger. Using any other brand of chargers

or lithium-ion batteries may cause fire or critical damage.

2.1 Charging Battery

•Align the battery notch on the charger stand, gently press the

battery down along the triangle arrow, and press it tightly.

•Connect the charger to an AC power outlet. During charging,

the red LED lights up, and after charging, the green LED lights

up.

2.2 Direct Charging

You can use the adapter to charge the built-in battery. It takes

about 5 hours to fully charge a dead battery. The indicator light is

red when charging, and remains green after being fully charged.

2.3 Attention for Using Battery Charger

•Battery charging can only be done indoors. Do not short circuit

the battery.

•Do not place the battery in a high-temperature environment

(≥60°C). Do not disassemble the battery or put it in a fire,

otherwise it may cause an explosion.

•Do not try to modify the battery or charger.

•Lithium ion batteries have no memory effect and can be

recharged at any time.

•After charging, please remove the charger from the socket

immediately.

3. Panel Function Summary

In this manual, a “long press” means pressing a button down for

about 2 seconds, and a “press” or a “short press” means pressing

and releasing right away.

3.1 Main Control Panel

1. Power LED Light

After the infrared camera is turned on, the indicator light will display as a

green power indicator; if the indicator light displays in orange, it means

that the battery is being charged.

2. HotKey button 1

Press to automatically focus, and long press to turn on/off the LED light.

3. HotKey button 2

Press to switch between measured objects (point, line and area), setting

range of thermal superposing temperature, color code, upper and lower

temperature limits.

Long press to turn on/off the laser.

4, 5, 6,7 Direction buttons

Up ( ), Down ( ), Left ( ), and Right ( ) keys have different usages

in different modes.

In the main menu, direction buttons are used for moving selected items or

changing slide-bar values. In real-time Infrared view mode, the direction

buttons provide one-click access.

Shortcut function of arrow keys in real-time thermal imaging mode:

Press to freeze or unfreeze theimage.

Long press to switch the image to the monitor display. Shortcut

function of the arrow keys in the mode for viewing and storing

thermal images:

Press , to select the preview image;

After pressing Hotkey button 2 in area measure (in yellow flashing):

Select measured spots: press Up ( ), Down ( ), Left ( ), and

Right ( ) button to move the spot in the same direction.

Select the measure line and sampling line; press Up ( ), Down

( ), Left ( ), and Right ( ) button to move the line in the same

direction.

Select area box: in move menu, press Up ( ), Down ( ), Left

( ), and Right ( ) buttons to move area box, and in size menu,

press Up ( ) and Down ( ) to resize the vertical direction area

box, press Left ( ) and Right ( ) buttons to resize horizontal area

box.

Select Color Palette: Press Left ( ) and Right ( ) to change Color

Palette.

Select temperature measurement limit: Press Up ( ) and Down

(

) buttons to change Color Palette temperaturelimit.

8. (Menu / Enter) button

This button has different functions under different conditions:

1). In real time Infrared view mode, press this button to open the

main menu.

2). In the menu mode, press the key to confirm operation.

3). In real time Infrared view mode, long press this button to

manually rectify measurement result, LCD screen will display the

word “rectifying”.

4). In image viewing mode, long press this button to exit.

：After auto rectifying, if device has abnormal noise, long press

button to perform manual rectifying usually solves such issues.

9, 10, Manual Focus (T / W) button

Press T/W button to manually focus to get better thermal image when

auto-focus thermal image is not good enough.

11, 12, CW / CCW imaging mode switch

Press the button to switch image models among infrared, visible, WIW.

13. Shutter key

Press the button to save the voice and image.

3.2 Side View

14. Power ON/OFF button

Long press this button to power on/ off the device.

15. Multifunctional interface for audio output or video output

Please insert converter cable. It can be connected to headphones to listen the

playback audio notes as analog audio output interface; It can be connected to

the monitor to play videos as a video output interface.

16. SD card interface

MICRO 4GB SD card can be inserted into the interface to expand storage

volume.

17. USB Interface

Standard USB interface can be connected to the computer for data

transmission.

3.3 Bottom View

18. External DC In

External DC requirement is DC 5V.

19. Screw nut on tripod

Size of screw nut on tripod 1/4” _20.

3.4 Left Side View

20. 3.2" Color 270° tiltable LCD

Inhaltsverzeichnis

Andere CreativeStar Wärmebildkamera Handbücher

CreativeStar

CreativeStar Artemis TI-CS-T11 Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR M-Series Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

FLIR

FLIR G300 pt Series Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

FLIR

FLIR X6530sc Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung