Creator SC-390 Bedienungsanleitung

Professional

SDI/DVI/HDMI

Switch

Scaler

User

’

Manual

V1.1

CREATOR Corporation (China)

Meaning of Symbols

■Safety Instruction

Symbols are used in the Manual and devices, referring to the possible risk to users or others, as

well as the damage to property, for helping you to safely and properly use the devices. The instruction

and the implications are as follows. Please make sure your correct understanding of these instructions

before using the Manual.

remind user to conduct according to the attached operation

and maintenance commands. If ignore these information,

death or injury could possibly happen.

remind the user that the risky uninsulated voltage in the

device could caused electric shock to human.

CE authentication indicates the product is in line with the EU

safety regulation, and for assurance of safety use.

SGS Authentication indicates the product has reached the QC

standard of the global-biggest Swiss universe surveyor.

This product has acquired the ISO9001 International Quality

Authentication (Authentication authority: Germany Rheinland

TUV)

Caution:

avoid electric shock, please don't open the case,

nor put the useless parts in it. Please contact with qualified

service staff.

■General information instruction

List the situation could cause unsuccessful operation or setup,

and relevant information needed to notice.

Important Notices

Caution

ensure the device in reliable use and

personal safety, please abide by the following

items when in installation, use and maintenance:

Notice in installation

◆Please DO NOT use the product in following

places: the places with dust, oily smoke,

electrical conductive dust, corrosive gas,

inflammable gas; the places with high

temperature, due, rain and wind exposures; the

places endangered by shock and vibration.

Electric shock, fire and incorrect operation could

also cause damage and deterioration to the

product.

◆When conducting screw drilling and wiring

process, DO NOT let metal irons and wire lead

drop into the controller and air vent, which could

possibly cause fire, failure and accidental

operation.

◆After finishing the installation, it is necessary

to ensure there is no foreign matter including the

packing material like contact paper on the

ventilation surface, otherwise, it could cause

poor heat dissipation while running, as well as

fire, failure and accidental operation.

◆Avoid conducting wiring and plugging in/out

cable socket with electricity, otherwise, electric

shock, circuit damage could easily happen.

◆Installation and wiring should be firm and

reliable. Poor contact could cause malfunction.

◆With regard to the application situations with

strong interference, shielded cable should be

used for the input and output of HF signal, to

improve the anti-interference performance of the

system.

Note in Wiring

◆Installation and wiring shouldn't be conducted

until external electric power is cut off, otherwise,

electric shock or device damage could happen.

◆The product is grounded by the earth lead of

the power cable.

avoid electric shock, the

earth lead is necessary to be connected with the

ground. Before making connection with the

output end or input end of the product, please

ensure it is correctly grounding.

◆Upon finish wiring, remove the sundries.

Please cover up the terminal plate for avoiding

electric shock.

Note for Operation and Maintenance

◆Please DO NOT touch the terminal when with

electricity, otherwise, electric shock could

happen.

◆Don't clean up and screw the terminal tight

before power is off. Such operation could cause

electric shock when with electricity.

◆Please turn off the power before connecting or

disconnecting the communication signal cable,

peripheral modules or control units, otherwise,

device could be damaged and accidental

operation could happen.

◆Please DO NOT disassemble the device, so

as to avoid internal electric components damage.

◆It is necessary to read through the Manual and

fully ensure the safety, before altering the

program, trial running, starting and stopping

operation.

◆Button battery shouldn't be replaced before

the power is off. If it has to be replaced when the

device is running, it should be conducted by

professional electric technician wearing insulated

gloves.

Note for declaration of worthless.

When declaring of worthless, please note

◆Explosion of electrolytic capacitor on the

circuit board could happen when burning it.

◆Please classify and dispose it. Don't dispose it

into household garbage.

◆Please deal it as industrial waste, or in

accordance with local environmental protection

regulation.

Foreword

Professional SDI/DVI/HDMI Switch Scaler User

’

s Manual primarily introduces the exterior

structure and key functions and parameters of CR-SC-390, as well as its application in LED display

systems.

The Manual serves as an instruction for user's operation, rather than for maintenance service

purpose. Since the date of release, any function or relevant parameter alteration will be in supplement

command. Please refer to the manufacturer or dealers for inquiry.

CREATOR Electronics own the copyright of the Manual. Without permission, any unit or person

shall not take part or total of the Manual for business purpose.

The copyright of the Manual is protected by Copyright Law of People

’

s Republic of China and other

Intellectual Property Law. Without written permission, any copy or distribution is prohibited.

Index

Chapter 1 Overview .............................................................................................................................................. 1

1.1 Functions and Features ........................................................................................................................ 1

1.2 Installation of Main Unit ........................................................................................................................ 2

Chapter 2 Main Unit Hardware ............................................................................................................................ 3

2.1 Panel functions ....................................................................................................................................... 3

2.2 Interface ................................................................................................................................................... 4

2.2.1 COM Port ................................................................................................................................. 4

2.2.2 RJ45 Internet Cable Production Method ............................................................................. 4

2.2.5 KEYBOARD Interface ............................................................................................................ 5

2.3 System Connection Diagram ............................................................................................................... 6

2.4 Operation with Panel Keys ................................................................................................................... 6

2.4.1 LCD Display ............................................................................................................................. 6

2.4.2 Key Light .................................................................................................................................. 6

2.4.3 Menu Setting ........................................................................................................................... 6

2.4.4 Example of Operations .......................................................................................................... 7

2.5 Menu Structure Diagram ....................................................................................................................... 8

Chapter 3 Control Keyboard Operations ........................................................................................................... 9

3.1 Control Keyboard Panel ........................................................................................................................ 9

3.2 Control Keyboard Operations ............................................................................................................ 10

Chapter 4 Command Set ....................................................................................................................................

4.1 Audio/video Switch Command ...........................................................................................................

4.1.1 Audio/video Switch Return Command ............................................................................... 12

4.2 Audio Tuning Command ..................................................................................................................... 12

4.2.1 Audio Tuning Return Command ......................................................................................... 12

4.3 Output Resolution Commands ........................................................................................................... 12

4.3.1 Output Resolution Return Commands .............................................................................. 13

4.4 Gamma Value Setting Command ...................................................................................................... 14

4.4.1 Gamma Value Setting Return Command ......................................................................... 14

4.5 Contrast Setting Command ................................................................................................................ 14

4.5.1 Contrast Setting Return Command .................................................................................... 15

4.6 Detail Enhancement Setting Command ........................................................................................... 15

4.6.1 Detail Enhancement Setting Return Command ............................................................... 15

4.7 Image Color Offset Setting command .............................................................................................. 15

4.7.1 Image Offset Setting Return Command ............................................................................ 16

4.8 Network Setting Command ................................................................................................................ 16

4.9 Network Inquiry Command ................................................................................................................. 17

4.10 Network Interface Default Parameters ........................................................................................... 17

4.11 Equipment Status Reading Command ........................................................................................... 17

4.12 Factory Default Setting Restoring Command ................................................................................ 18

Chapter 5 Technical Parameters ....................................................................................................................... 19

CREATOR CHINA 20

- 08 WWW.CREATOR199 7 .COM

1Professional SDI/DVI/HDMI Switch Scaler User ’ s Manual

Chapter

Chapter 1

1 Overview

Overview

Professional SDI/DVI/HDMI switch scaler

SC-390 is a highly-integrated audio/video

converter and switcher for both video input of

YUV, YC, CV, VGA, DVI, HDMI and 3G-SDI

formats and video output of DVI, HDMI and SDI

formats. It is designed with CREATOR

’

s unique

audio/video switching technology to meet with

today

’

s need for use of display equipments of

high quality and high definition video, compatible

with multiple input/output resolutions, and offering

synchronous operation by panel keys and PC

software.

1.1

1.1 Functions

Functions

Functions and

and

and Features

Features

◆Compatible with YUV, YC, CV, VGA, DVI,

HDMI and 3G-SDI multiple signal source input,

supporting high definition display under DVI,

HDMI and 3G-SDI signal modes;

◆Compatible with 4-way audio stereo input and

1-way audio stereo output, either balance or

non-balance;

◆Audio input with video, namely, combined

conversion and switch of audio/video signal;

◆Processing 1-way audio/video input or output

only at one time;

◆Compatible with multiple input resolutions:

CV ：480i, 480P, 576i, 576P;

YC ：480i, 480P, 576i, 576P;

YUV ：480i, 480P, 576i, 576P, 720P, 1080i , 1080P;

VGA ：800X600@60Hz, 1024X768@60Hz,

1280X1024@60Hz , 1600X1200@60Hz;

DVI ：800X600@60Hz, 1024X768@60Hz,

1152X864@75Hz, 1280X768@60Hz,

1280X960@60Hz, 1280X1024@60Hz,

1360X768@60Hz, 1366X768@60Hz,

1440X900@60Hz, 1600X1200@60Hz,

1920X1080@60Hz;

HDMI ：480i, 480P, 576i, 576P, 720P, 1080i , 1080P ,

800x600@60HZ ,

1024x768@60HZ, 1280x960@60HZ,

1280x1024@60HZ, 1440x900@60HZ,

1680x1050@60HZ, 1600x1200@60HZ;

SDI ：720X480P29.97, 720X480P59.94,

720X576P25, 720X576P50, 1280X720P60,

1280X720P59.94, 1280X720P50,

1280X720P30, 1280X720P29.97,

1280X720P25, 1280X720P24,

1280X720P23.97, 1920X1080P30,

1920X1080P29.97, 1920X1080P25,

1920X1080P24, 1920X1080P23.98,

1920X1080P60 , 1920X1080P59.94 ,

1920X1080P50, 1920X1035I60,

1920X1035I59.94, 1920X1080I50,

1920X1080I60, 1920X1080I59.94;

◆Compatible with multiple output resolutions:

DVI/HDMI ：800X600@60Hz, 1024X768@60Hz,

1152X864@75Hz, 1280X720@60Hz,

1280X768@60Hz, 1280X960@60Hz,

1280X1024@60Hz, 1360X768@60Hz,

1366X768@60Hz, 1440X900@60Hz,

1600X1200@60Hz, 1920X1080@60Hz;

SDI ：1280X720P60, 1280X720P59.94,

1280X720P50, 1920X1080P30,

1920X1080P29.97, 1920X1080P25,

1920X1080P24, 1920X1080P23.98,

1920X1080P60, 1920X1080P59.94,

1920X1080P50, 1920X1080I50,

CREATOR CHINA 20

- 08 WWW.CREATOR199 7 .COM

2Professional SDI/DVI/HDMI Switch Scaler User ’ s Manual

1920X1080I60, 1920X1080I59.94;

◆Compatible with multiple ways of control, such

as CREATOR keyboard control, dual serial

interface control and Ethernet remote control, and

with operation information displayed on the front

panel LCD screen synchronously, for more direct,

convenient and flexible operation;

◆Compatible with output on two separate

screens (DVI/HDMI, 3G-SDI), and enabling

parameter setting of the output format of either

way separately;

◆Compatible with color enhancement, contrast

adjustment and isoparametric adjustment ,

satisying your needs for different image and

screen visual effects;

◆Featuring operation memory function, with

which function the system automatically saves

the current status when there is no other

operation in 10 seconds after setting is done;

◆Featuring temperature self-detecting function,

with which function the system reads the

temperature every 3 seconds and displays on the

LCD screen, to ensure safety in use;

◆Featuring automatic fan on function, with which

function the fan will be automatically on when the

equipment temperature reaches 30

C for cooling

the equipment, and the fan will be automatically

off when the equipment temperature drops to

◆Featuring factory default value restoring

function;

◆Adopting 1U standard 19 ” housing design to fit

with a standard 19 ” housing.

1.2

1.2 Installation

Installation

Installation of

of Main

Main

Main Unit

Unit

CR-SC-390

’

s main unit may be installed on a

standard 19 ” housing. The accessories of each

main unit include a pair of brackets and a bag of

screws for mounting on the housing, in the way as

shown below.

CREATOR CHINA 20

- 08 WWW.CREATOR199 7 .COM

3Professional SDI/DVI/HDMI Switch Scaler User ’ s Manual

Chapter

Chapter 2

2 Main

Main

Main Unit

Unit

Unit Hardware

Hardware

2.1

2.1 Panel

Panel

Panel functions

functions

Front panel:

Rear panel:

1) LCD

LCD

LCD DISPLAY

DISPLAY

For display of the current status of the output

screen and operation information.

2) INPUTS

INPUTS

INPUTS SELECTION

SELECTION

Input signal selection, including YPbPr, Y/C,

CV, VGA, 3G-SDI, DVI and HDMI total 7-way

signals for selection.

3) OUTPUTS

OUTPUTS

OUTPUTS SELECTION

SELECTION

Output signal selection, including 3G-SDI,

DVI and HDMI total 3-way signals for selection,

corresponding to the output ports on the rear

panel.

4) MENU

Menu setting selection key is configured on

the front panel. Press this key to enter menu

setting, and the menu key on the front panel will

be shown on the LCD display, and at the same

time the key lights will be on.

▲ ▼

Direction key. Use this key to move up/down

to select the required parameters for the item to

be set.

ENTER

Press Enter and move to the menu in the

next level from the menu on the front panel keys.

5) PARAMETER/ADJUST

PARAMETER/ADJUST

In the menu setting with front panel keys, this

knob is used as the direction key for selecting

parameters for the required items between left

and right.

6) MASTER

MASTER

MASTER VOL

VOL

Volume adjust knob, for adjusting the input

audio volume (not adjustable under HDMI and

3G-SDI signal input).

7) AUDIO

AUDIO

AUDIO INPUTS/

INPUTS/

INPUTS/ AUDIO

AUDIO

AUDIO OUTPUTS

OUTPUTS

Audio input and output port, offering 4-way

audio signal input (YPbPr/Y/C, CV, VGA, DVI)

and 1-way DVI audio signal output.

8) VIDEO

VIDEO

VIDEO INPUTS

INPUTS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Creator Schalten Handbücher

Creator

Creator MAX1301 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung