5925 Heisley Road • Mentor, OH 44060-1833
Holding Cabinet FL-2331-DOM
Rev. 10 (12/11) Page 2 of 8
ELECTRICAL SPECIFICATIONS:
Model No. Volts Watts Amps Hertz Phase NEMA
H138NPSCDOM2 120 1400 11.7 60 1 5-15P
H138NPSCDOM3 120 2000 16.6 60 1 5-20P
Note: The above model numbers are basic models. They may be followed by letters: GA, L, R, 2M, D, or ending with S.
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. Place the cabinet in a well-ventilated area.
4. Place cabinet on level oor.
5. Plug cord end into proper wall outlet.
FIRST TIME START-UP:
1. Push the POWER switch to “ON”, and run the
unit for one hour.
NOTE: DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before rst use. Blower inlet guard must be in place before
operating cabinet.
WARNING
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H138NPSCDOM Series Hot Cabinet
HOW TO HOLD:
1. Push POWER switch to “ON.” POWER LIGHT
will come on.
2. The control is preset to maintain an average of
180°F. Displayed temperatures will change during
loading and unloading of product
3. Put product into cabinet.
NOTE: Proper food holding temperature is
140°F/60°C or higher.
WARNING Air is VERY HOT
when door is opened.
TEMPERATURE
CONTROL
POWER
LIGHT POWER
SWITCH
ADJUST
BUTTONS
"SET" BUTTON
TEMPERATURE
DISPLAY
ADJUST
°F
SET
