Crescent C2000E Bedienungsanleitung

4975 West Main Street

Tupelo, MS 38801

662-844-8779

1-888-856-4516

Fax 1-888-299-8986

www.crescentsales.com

email:

[email protected]

5ATTACH JACK BASE TO SUPPORT(A)

1. Slip JACK BASE into SUPPORT

2. Use BOLT C,12mm NUT,

WASHER F and WASHERS E

to secure JACK BASE with

allen wrench.

ATTACH JACK TOP TO ARM(B)

1. Slip JACK TOP into ARM.

2. Use BOLT D,12mm NUT,

WASHER F and WASHERS E

to secure JACK TOP to

SUPPORT with allen wrench.

(A)

(B)

Cradle

ATTACH CRADLE TO ARM

1. Lay CRADLE onto table.

2. Slip ARM into CRADLE

3. Use BALL and PIN to secure CRADLE

to ARM

ATTACH BATTERY TO SUPPORT

1. Using 3 PHILLIPS HEAD SCREWS K,

attach battery to back of SUPPORT.

C12mm

Support

12mm

ARM

Assembly Instructions

C2000E BODY LIFT

07/10

Arm

Cradle

Support

Leg

3” Caster

READ THESE INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN ASSEMBLY.

If there are any instructions that are not understood, please call our customer

service department at 1-888-856-4516.

LIMITED WARRANTY

The C2000H (Hydraulic) and the C2000E (Electronic) Body Lifts and their

accessories are guaranteed against defect in material and workmanship for a

period of ONE YEAR from date of

purchase. Limited to repair or replacement at

Crescent Sales discretion.

Jack Base

Jack Top

Arm

CONNECT 3” CASTERS TO BOTTOM OF LEG

1. Turn LEG over so that the 7

holes face upward.

2. Screw each CASTER into

LEG clockwise.

IMPORTANT: CASTER must be completely

screwed into leg before any object can be

lifted. Otherwise, damage will occur.

Braces

BOLTS, NUTS & WASHERS INCLUDED

2ATTACH SUPPORT TO LEG

1. Turn LEG onto CASTERS.

2. Place SUPPORT onto LEG.

3. Use BOLTS A, 3/8” NUT,

and WASHER E to

secure SUPPORT to LEG.

4. Repeat step 3 three times.

4ATTACH ARM TO SUPPORT

1. Slip ARM between top of

SUPPORT.

2. Use BOLT B, 1/2” NUT, and

WASHER F to secure ARM to

SUPPORT.

(1)1/2” CenterLock Nut

(10)3/8” CenterLock Nut (24) 3/8” Washer

(4) 1/2” Washer

AE E

Support

BF F

Support

(3)Phillips Head

Screws

TOOLS NEEDED:

Phillips Head Screwdriver

Wrench

Adjustable Wrench

Allen Wrench

(3) Ball & Pin

IMPORTANT: Make sure arm

support is in the correct

position. See image below.

Support

Leg

Arm

Support

Leg

Arm

(10) 3/8” x 3” Grd. 6 Hex Head Bolts

(1) 1/2” x 3-1/2” Grd. 6 Hex Head Bolt

(1) 12mm x 87mm Allen Head Bolt

(1) 12mm x 65mm Allen Head Bolt

(2)12mm CenterLock Nut

3/8”

1/2”

ATTACH BRACES TO

SUPPORT AND LEGS

1. Attach BRACE to SUPPORT

using BOLTS A, 3/8” NUT,

and WASHER E. (fig. A)

2. Repeat using using BOLTS A,

3/8” NUT, and WASHER E to

attach BRACE to LEGS. (fig. B)

AE E

Support

3/8”

AE E 3/8”

Support

Leg

Brace

Brace Brace

fig. A fig. B AA

3/8”

Brace

Leg

Andere Crescent Hebesystem Handbücher

Crescent

Crescent C2000 Stücklistenhandbuch

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung