Crestron TSS-752 Bedienungsanleitung

Crestron TSS-752

7” Room Scheduling Touch Screen

Configuration Guide

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, Rava, and RoomView are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States

and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for

errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Crestron TSS-752 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7602A Contents •i

Contents

7” Room Scheduling Touch Screen: TSS-752 1

Access the Setup Screens........................................................................................................... 1

Configure the Touch Screen ...................................................................................................... 3

Ethernet Setup .............................................................................................................3

IP Table Setup .............................................................................................................5

Audio Setup.................................................................................................................7

Display Setup .............................................................................................................. 7

Standby Timeout .........................................................................................................8

Diagnostics ..................................................................................................................9

About ......................................................................................................................... 14

Save & Exit ............................................................................................................... 14

Crestron TSS-752 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7602A 7” Room Scheduling Touch Screen: TSS-752 •1

7” Room Scheduling

Touch Screen: TSS-752

Access the Setup Screens

The “TSS-752 Setup” menu is the starting point for configuring the TSS-752 Room

Scheduling Touch Screen from Crestron®.

NOTE: If no project has been loaded or if an invalid project has been loaded, the

TSS-752 displays a message instructing the user to touch the screen to enter the

setup menus.

The setup screens enable basic configuration procedures prior to regular operation of

the touch screen. To access the setup screens after the TSS-752 boots up to the

RoomView®Scheduling “Offline” screen, touch “hard keys” 1, 2, 3, and 4, to the

right of the touch screen display, in sequence twice (touch 1, 2, 3, 4, 1, 2, 3, 4) within

a 5-second period.

Button Numbering

7” Room Scheduling Touch Screen Crestron TSS-752

2•7” Room Scheduling Touch Screen: TSS-752 Configuration Guide – DOC. 7602A

The “TSS-752 Setup” menu is displayed.

“TSS-752 Setup” Menu

The “TSS-752 Setup menu” is comprised of buttons for Ethernet Setup, IP Table

Setup, Audio Setup, Display Setup,Standby Timeout and Diagnostics. In

addition, there is a User Project Mode On button to toggle the RoomView

Scheduling interface, an About button that provides information about the touch

screen and a Save & Exit button. The functions are detailed in the next section of

this guide.

Crestron TSS-752 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7602A 7” Room Scheduling Touch Screen: TSS-752 •3

Configure the Touch Screen

Ethernet Setup

On the “TSS-752 Setup” menu, touch Ethernet Setup to display the “Ethernet

Setup” menu.

“Ethernet Setup” Menu

The “Ethernet Setup” menu displays the touch screen’s MAC address and IP

Address, Subnet Mask, Def Router, Primary DNS, Secondary DNS, Hostname and

Domain. There are controls for turning DHCP On or Off as well as a Set Static IP

Address Settings button, which provides access to controls which allow editing of

these settings. This screen also contains a Link indicator to show the status of the

Ethernet connection.

NOTE: Crestron recommends using a static IP address for anything other than

testing.

DHCP is enabled by default. To change to a static IP address, touch Off under

DHCP Enabled, then touch Set Static IP Address Settings to display the “Ethernet

Setup – Static IPs” screen.

7” Room Scheduling Touch Screen Crestron TSS-752

4•7” Room Scheduling Touch Screen: TSS-752 Configuration Guide – DOC. 7602A

“Ethernet Setup – Static IPs” Screen

To edit the Static IP Address, Static Subnet Mask, Static Default Router, Preferred

DNS or Alternate Preferred DNS, touch the button directly under the label for the

entry to edit. The on-screen numeric keypad opens.

On-Screen Numeric Keypad

Use the keypad to make the new entry. Touch the “x” in the text field to clear any

previous entry. Touch to delete the last digit. Touch Save to save a new entry

or to return to the “Ethernet Setup – Static IPs” screen.

After new settings have been saved, touch Reboot Required to Apply IP Changes

on the “Ethernet Setup – Static IPs” screen to reboot the touch screen, so the new

settings can take effect.

If not making any changes, touch to return to the “Ethernet Setup” menu.

Touch again to return to the “TSS-752 Setup” menu.

Crestron TSS-752 7” Room Scheduling Touch Screen

Configuration Guide – DOC. 7602A 7” Room Scheduling Touch Screen: TSS-752 •5

IP Table Setup

On the “TSS-752 Setup” menu, touch IP Table Setup to display the “Ethernet Setup

– IP Table” menu.

“Ethernet Setup –IP Table” Menu

NOTE: This step should not be performed when the TSS-752 is being used for

RoomView scheduling, as having an IP table entry will prevent the project from

starting up.

The “Ethernet Setup – IP Table” menu displays up to four IP table settings, each of

which has an Online indicator. To add or edit an entry, touch the Add/Edit button to

its left. The “Ethernet Setup – Edit IP Table Entry” screen is displayed.

“Ethernet Setup –Edit IP Table Entry” Screen

Touch the field below CIP ID to display the on-screen hex keypad.

7” Room Scheduling Touch Screen Crestron TSS-752

6•7” Room Scheduling Touch Screen: TSS-752 Configuration Guide – DOC. 7602A

On-Screen Hex Keypad

Use the keypad to make the new entry. Touch the “x” in the text field to clear any

previous entry. Touch to delete the last digit. Touch Save to save a new entry

or to return to the “Ethernet Setup – Edit IP Table Entry” screen.

Touch the field below IP Address/Hostname to display the on-screen keyboard.

On-Screen Keyboard

Use the keyboard to make the new entry. Touch Cancel to return to the “Ethernet

Setup – Edit IP Table Entry” screen. Touch the “x” in the text field to clear any

previous entry. Touch to delete the last digit. Touch Save to save a new entry

and return to the “Ethernet Setup – Edit IP Table Entry” screen.

On the “Ethernet Setup – Edit IP Table Entry” screen, touch Save Entry to save the

current entry or Delete Entry to clear it.

If not making any changes, touch to return to the “Ethernet Setup –IP

Table” menu.

Touch again to return to the “TSS-752 Setup” menu.

Andere Handbücher für TSS-752

Inhaltsverzeichnis

Andere Crestron Touch-Screen Handbücher

Crestron

Crestron TPMC-9L Kurzanleitung

Crestron

Crestron TPMC-V12 & TPMC-V15 Bedienungsanleitung

Crestron

Crestron TPMC-8T-GA Bedienungsanleitung

Crestron

Crestron TSW-1050 Bedienungsanleitung

Crestron

Crestron TPMC-V12 & TPMC-V15 Bedienungsanleitung

Crestron

Crestron TSW-1052 Maßzeichnung

Crestron

Crestron V12 Bedienungsanleitung

Crestron

Crestron FlipTop FT-TS600 Betriebsanleitung

Crestron

Crestron TPMC-8X-GA Bedienungsanleitung

Crestron

Crestron TSW-750 Bedienungsanleitung

Crestron

Crestron V12 Bedienungsanleitung

Crestron

Crestron TSW-1050 Maßzeichnung

Crestron

Crestron TSW-570 Bedienungsanleitung

Crestron

Crestron TPMC-9L Anleitung zur Verwendung

Crestron

Crestron TSW-760 Bedienungsanleitung

Crestron

Crestron V-Panel V15 Bedienungsanleitung

Crestron

Crestron TSW-552 Maßzeichnung

Crestron

Crestron TPS-6X Series Bedienungsanleitung

Crestron

Crestron TSW-1052 Bedienungsanleitung

Crestron

Crestron TSW-550 Bedienungsanleitung

Crestron

Crestron V-Panel TSD-2020 Bedienungsanleitung

Crestron

Crestron TSS-752 Bedienungsanleitung

Crestron

Crestron TPMC-4SMD Anleitung zur Verwendung

Crestron

Crestron TPMC-3SM Bedienungsanleitung

Beliebte Touch-Screen Handbücher anderer Marken

Elecro Engineering

Elecro Engineering Poolsmart Plus Montageanleitung

Racelogic

Racelogic MFD Touch Bedienungsanleitung

J2 580 Benutzerhandbuch

HAI

HAI OmniTouch 10p Bedienungsanleitung

panel

panel PC PSR108-FM Series Bedienungsanleitung

Tipro

Tipro FREE+ Bedienungsanleitung

Systemline

Systemline Commander Bedienungsanleitung

BeiJer

BeiJer T21C-C24 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E534869 Bedienungsanleitung

Dell

Dell C8618QT Bedienungsanleitung

Tipro

Tipro FREE+ 12.1" Bedienungsanleitung

Advantech

Advantech IDP31-215W Series Bedienungsanleitung

Element

Element VK Series Bedienungsanleitung

Johnson Controls

Johnson Controls Advanced Graphic Touchscreen Display Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2799L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2020L Stücklistenhandbuch

Wiggly-Amps

Wiggly-Amps Engage Bedienungsanleitung

gefran

gefran G-Vision 67-070 Bedienungsanleitung