Crestron TSW-730 Maßzeichnung

DO GUIDE

DO Check the Box

QUANTITY PRODUCT COLOR PART NUMBER

1 Plastic Cover, No-Button, Left1Black 2033452

1 Plastic Cover, No-Button, Left2White 2033451

1 Plastic Cover, No-Button, Right1Black 2033450

1 Plastic Cover, No-Button, Right2White 2033449

2 Screws, 4B x 3/4", Phillips 2019088

2 Screws, 04-40 x 1/4", Phillips1Black 2007152

2 Screws, 04-40 x 1/4", Phillips2Zinc 2007160

2 Screws, 04-40 x 1/4", Torx1Black 2025311

2 Screws, 04-40 x 1/4", Torx2Stainless Steel 2025312

4 Screws, 06-32 x 1 1/2", Phillips 2031703

1Bit, Torx 2025915

1. This part ships with the TSW-730-B-S.

2. This part ships with the TSW-730-W-S.

TSW-730

7” Room Scheduling Touch Screen

DO Change the Button Inserts or Button Covers

The Crestron®TSW-730 Touch Screen ships with 10 “hard key” push buttons for quick access to

commonly used functions. Optional, custom engravable button covers are available

(TSW-730-BTNO and custom engraving sold separately). For a clean appearance, either column of

buttons may be removed and covered using the included no-button covers.

To change the inserts or covers, use the following procedure:

1. Insert a small at head screwdriver into the appropriate hole on the bottom of the TSW-730 to

release its cover.

2. Gently remove the cover from the TSW-730.

3. If removing the button insert after removing the button cover, use a small at head screwdriver

to press the tabs, and then gently lift the button insert from the TSW-730. Refer to the following

illustration for the tab locations on the button insert.

Touch Screen with Button Inserts

4. Carefully position the new cover over the front of the touch screen and press it into place.

Touch Screen with No-Button Covers

DO Install the Touch Screen

The TSW-730 can be mounted into a standard

electrical box or onto a at surface. A tabletop

enclosure and swivel mount (TSW-730-TTK and

SMK-4SM/730, both sold separately) are also

available.

Mounting into a U.S. Electrical Box

To mount the TSW-730 into a U.S. electrical box,

use the following procedure:

1. Insert a small at head screwdriver into the

hole shown in the following illustration and

gently separate the back panel from the touch screen.

2. Use the four included 06-32 x 1 1/2” screws to attach the back panel to the electrical box.

3. Make connections to the TSW-730 using Crestron power supplies for Crestron equipment.

4. Carefully position the front of the touch screen over the back panel and gently snap it into

place.

5. Use two of the included 04-40 x 1/4” screws to secure the TSW-730. For standard applications,

use the Phillips screws. For secure applications, use the security type Torx screws along with

the included Torx screwdriver bit.

Mounting into a U.K. Electrical Box

To mount the TSW-730 into a U.K. electrical box, use the following procedure:

1. Insert a small at head screwdriver into the hole shown in the following illustration and gently

separate the back panel from the touch screen.

2. Use the two included 4B x 3/4” screws to attach the back panel to the electrical box.

Insert a screwdriver to release the covers.

Use a screwdriver

to release

the button insert.

Insert a screwdriver to separate the back panel.

U.S. Electrical Box

TSW-730

Screws (4) 06-32 x 1 1/2”

Occupancy Sensor Input:

From Room Occupancy Sensor

LAN PoE:

10BASE-T / 100BASE-TX

Ethernet to LAN

Screws (2) 04-40 x 1/4” Phillips

Screws (2) 04-40 x 1/4” Torx

U.K. Electrical Box

TSW-730

Screws (2) 4B, 3/4”

Insert a screwdriver to separate the back panel.

DO GUIDE DOC. 7555A (2037057) 04.15

Specications subject to change without notice.

3. Make connections to the TSW-730 using Crestron power supplies for Crestron equipment.

4. Carefully position the front of the touch screen over the back panel and gently snap it into

place.

5. Use two of the included 04-40 x 1/4” screws to secure the TSW-730. For standard applications,

use the Phillips screws. For secure applications, use the security type Torx screws along with

the included Torx screwdriver bit.

DO Access the Setup Screens

NOTE: The TSW-730 can take up to 120 seconds to boot.

The setup screens enable basic conguration prior to regular operation of the TSW-730. To display

the main setup screen, touch the screen while applying power to the unit.

NOTE: If no project has been loaded or if an invalid project has been loaded, the touch screen

defaults to the main setup screen.

During regular operation of the touch screen, there are two ways to access the setup screens:

1. Place a button on the project main page and assign the reserved join number (17242) that

accesses the setup screens.

2. Press hard keys 1, 2, 3, and 4 on the left side of the touch screen display in sequence twice

(press 1, 2, 3, 4, 1, 2, 3, 4) within a 5 second period.

As of the date of manufacture, the product has been tested and found to comply with specications for CE marking.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Industry Canada (IC) Compliance Statement

CAN ICES-3(B)/NMB-3(B)

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive, non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and

end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement.

The specic patents that cover Crestron products are listed at patents.crestron.com. The product warranty can be found at www.crestron.com/warranty.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and

names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

DO Learn More

Visit the website for additional information and the latest rmware updates.

Crestron Electronics

15 Volvo Drive, Rockleigh, NJ 07647

888.CRESTRON | www.crestron.com

Occupancy Sensor Input:

From Room Occupancy Sensor

LAN PoE:

10BASE-T / 100BASE-TX

Ethernet to LAN

Screws (2) 04-40 x 1/4” Phillips

Screws (2) 04-40 x 1/4” Torx

Andere Handbücher für TSW-730

Andere Crestron Touch-Screen Handbücher

Crestron

Crestron V-Panel TSD-2020 Bedienungsanleitung

Crestron

Crestron TSW-760 Bedienungsanleitung

Crestron

Crestron TPS-6X Series Bedienungsanleitung

Crestron

Crestron TSW-750 Bedienungsanleitung

Crestron

Crestron TSW-732 Bedienungsanleitung

Crestron

Crestron TSW-1052 Bedienungsanleitung

Crestron

Crestron TST-902 Betriebsanleitung

Crestron

Crestron V12 Bedienungsanleitung

Crestron

Crestron TSW-552 Maßzeichnung

Crestron

Crestron TPMC-8X-GA Bedienungsanleitung

Crestron

Crestron n TPMC-12 Bedienungsanleitung

Crestron

Crestron TSW-732 Bedienungsanleitung

Crestron

Crestron TPMC-V12 & TPMC-V15 Bedienungsanleitung

Crestron

Crestron TSS-752 Bedienungsanleitung

Crestron

Crestron TPMC-8X-GA Bedienungsanleitung

Crestron

Crestron TPMC-3SM Bedienungsanleitung

Crestron

Crestron TSW-1050 Bedienungsanleitung

Crestron

Crestron TSS-7 Betriebsanleitung

Crestron

Crestron TSW-550 Bedienungsanleitung

Crestron

Crestron V-Pane TPMC-V12 Bedienungsanleitung

Crestron

Crestron V12 Bedienungsanleitung

Crestron

Crestron TPMC-4SMD Anleitung zur Verwendung

Crestron

Crestron TSW-570 Bedienungsanleitung

Crestron

Crestron TSS-70 Series Bedienungsanleitung

Beliebte Touch-Screen Handbücher anderer Marken

Elecro Engineering

Elecro Engineering Poolsmart Plus Montageanleitung

Johnson Controls

Johnson Controls IQ4 HUB Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET2270L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems ET1002L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 3201L Bedienungsanleitung

Duratec

Duratec S15 Bedienungsanleitung

Racelogic

Racelogic MFD Touch Bedienungsanleitung

J2 580 Benutzerhandbuch

HAI

HAI OmniTouch 10p Bedienungsanleitung

panel

panel PC PSR108-FM Series Bedienungsanleitung

Tipro

Tipro FREE+ Bedienungsanleitung

Systemline

Systemline Commander Bedienungsanleitung

Interactive Technologies

Interactive Technologies Insite Bedienungsanleitung

GVision

GVision Legacy Bedienungsanleitung

BeiJer

BeiJer T21C-C24 Bedienungsanleitung

Advantech

Advantech ITM-5117 Series Bedienungsanleitung

Edge

Edge CS Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems WALLABY PRO Bedienungsanleitung