Crivit SP-11 Bedienungsanleitung

SMART BICYCLE HELMET SP-106 / REMOTE

CONTROL SP-11 / BACK LIGHT AND INDICATOR LIGHTS

IAN 309848

SMART BICYCLE

HELMET SP-106 /

REMOTE CONTROL

SP-11 / BACK LIGHT

AND INDICATOR

LIGHTS

owner´s manual

GB / IE / NI Owner´s Manual 04 - 12

A B

H I

DPress

Press

1x 2x 3x

Smart Bicycle Helmet SP-106 05

Safety instructions 05

User information 06

1. The correct helmet position 06

2. Operating the one-handed size adjustment system 06

3. Adjusting the strap divider 06

4. Adjusting the chin strap 07

5. Charge battery 07

6. Turning the helmet on and off 07

7. Cleaning and care 07

8. Disposal 08

Remote control SP-11 08

Safety instructions 08

User information 08

1. Before the rst use 08

2. Attaching to handlebars 08

3. Removing and attaching the control element 09

4. Functions 09

5. Cleaning and care 09

6. Disposal 10

Back light and indicator lights 10

Safety instructions 10

User information 10

1. Before the rst use 10

2. Functions 10

3. Cleaning and care 11

Smart Bicycle Helmet SP-106

4. Disposal 11

Resetting the wireless connection 11

Technical information 12

Conformity declaration 12

SMART BICYCLE HELMET SP-106

Dear customer!

We are pleased that you have chosen our high-quality products, which are strictly produced

and certied according to current valid safety standards. Familiarise yourself with the product

before use.

Read the instruction manual and the safety information carefully. Only use the product as

described and for the indicated areas of use. Please store this manual safely. Please hand

over all the documentation when passing this product to third parties.

Safety instructions

• Warning! This helmet should not be used by children while climbing or doing other

activities when there is a risk of strangulation/hanging if the child gets trapped with

the helmet.

• Your helmet was especially developed to protect you when cycling, skateboarding,

roller-skating and when riding your pedal scooter.

• It may not be used for other sports or for motorcycling.

• Please be aware that the helmet can only protect if it ts correctly. Make sure to try

different sizes when buying it.

• Please be aware that, despite its correct adjustment, a helmet cannot always protect

from all injuries.

• The helmet must be checked periodically for visible defects.

• After every hard impact, blow or deep scratch, the helmet must be replaced, as it has

lost its protective function.

• The helmet must also be replaced if it no longer ts or 5 years after the date of

manufacture at the latest, even if no damage can be observed.

• Changing or removing original parts of the helmet can drastically affect its protective

Smart Bicycle Helmet SP-106

function.

• The helmet may not be changed to make any additions which are not recommended

by the manufacturer.

• High temperatures from 60° C can seriously damage the helmet. Uneven helmet

surfaces and air bubbles are signs of this kind of damage.

• Do not store behind glass panes e.g. in the car or near heat sources.

• Ensure that the helmet battery is always charged with a micro USB cable.

• Please be aware that the indicator function on the helmet to indicate a change in

direction does not replace manual hand signals.

• Check before each use that the back light and indicator light functions work in

combination with the remote controls.

User information

1. Correct helmet position

• The helmet must always sit horizontally on your head. (Fig. A)

• If the helmet is too far forward, this can impair your vision.

• If the helmet is too far back, your forehead is not sufciently protected. (Fig. B)

2. Operating the one-handed size adjustment system

The integrated size adjustment system (Fig. C) can be adjusted freely with a turning knob on

the back of the head:

• smaller = turn to the right • larger = turn to the left

3. Adjusting the strap divider

• Open the strap divider. (Fig. E)

• The strap divider must be positioned in such a way that the straps are tight but

comfortable. The strap divider must be placed under the ears; the straps should not

cover the ears.

• Close the strap divider. (Fig. D)

An open strap divider can lead to the helmet slipping during an

accidentandthuslosingitsefcacy!!!

Smart Bicycle Helmet SP-106

4. Adjusting the chinstrap

• The chinstrap (G.3) is adjusted correctly when it is comfortable and secure and you

feel a light pressure when you open your mouth.

The fastener (G.1) should not be on the chin or jaw.

• If the chinstrap (G.3) is too loose, it must be tightened with the buckle (G.2) on the

fastener (G.1).

• If the chinstrap (G.3) is too tight, it must be loosened with the buckle (G.2) on the

fastener (G.1).

Please be aware that the fastener must be closed before each

journey!!! (Fig. F)

Pleasebeawarethatthehelmetcanonlyprotectifittscorrectly.

Please try different sizes and choose one that feels comfortable and

secure on your head.

5. Charge battery

To be able to use the helmet functions, charge the battery completely before the rst use:

• Connect the micro USB charging cable with the USB connection at the back of the

helmet (Fig. L).

• The charging light next to the USB connection lights up in red during the charging

process (Fig. L).

• Once the charging light on the helmet goes out, this indicates that charging is

complete.

• Remove the micro USB cable from the helmet once charging is complete.

• Check the battery display before every use. The LED light next to the USB connection

ashes when the battery is down to just 10-15% charge.

Caution:Chargethebatterycompletelybeforetherstuse.

To ensure that the helmet works properly, check the back light and

indicator light functions as well as the battery LED light on the helmet

before each use.

6. Turning the helmet on and off

• Switch the helmet on at the -switch before use (Fig. I).

• The LED light goes green during operation.

• Hold down the switch for approx. 3 seconds until the LED light goes out to turn it off

again after use.

Smart Bicycle Helmet SP-106

7. Cleaning and care

• Wash your helmet only with lukewarm water, mild soap and a soft cloth.

• Leave your helmet to air dry after every use.

• Wash the inner padding with lukewarm water and mild soap and then leave to air

dry.

8. Disposal

You must dispose of the helmet through an authorised waste disposal company or a

communal waste disposal facility.

REMOTE CONTROL SP-11

Safety instructions

• Ensure that the remote control battery is always charged with a micro USB cable.

• Never leave the remote control unattended on your handlebars.

• When attaching the remote control to the handlebars, always ensure that you attach

the remote control in such a way that you can read the writing.

• Before each use, check that the remote control works properly in combination with the

helmet and its back light and indicator light functions.

User information

1. Beforetherstuse

Charge the battery completely before the rst use (Fig. J):

• Connect the micro USB charging cable with the USB connection at the back of the

remote control

• The ON/OFF button lights up in red during the charging process.

• Once the ON/OFF button light goes out, this indicates that charging is complete.

• Remove the micro USB cable from the remote control once charging is complete.

2. Attaching to handlebars

• Attach the remote control to your handlebars using the recess provided (Fig. J).

• To attach the remote control, place the screw in the provided opening and tighten it

Remote control SP-11

(Fig. J).

• Also reinstall the rubber covers and the brakes properly on your handlebars if

necessary.

3. Removing and attaching the control element

Never leave the control element of your remote control unattended on your handlebars. The

remote control has a bayonet catch. Release the control element as follows (Fig. J):

• Turn the upper control element anticlockwise until it is diagonal to the bracket.

• Remove the control element of the remote control and keep it with you.

Reattach the control element to the bracket on the handlebars before use as follows:

• Place the control element of the remote control diagonally onto the handlebar

attachment. Be careful to attach the control element in the correct position, meaning

the ON/OFF button must always be readable while travelling and may not be upside

down.

• turn the control element of the remote control clockwise on the handlebar attachment

until it locks into place and sits rmly

Caution: Keep your remote controls with you and do not leave them

unattended on the handlebars. When attaching the control element

to the handlebars, please ensure that you attach this correctly and

that you will be able to read the writing while travelling.

4. Functions

To be able to use the functions of the remote control in connection with the helmet, start the

remote control by pressing the ON/OFF switch.

Now, you can control the back light and the indicators via the remote control attached to the

handlebars.

The remote control displays which function is active by illuminating the respective button.

The remote control has 4 functions:

• ON-/OFF

• Left indicator light

• Right indicator light

• Back light

To switch off the remote control, hold the ON/OFF switch for a few seconds until the light

goes out.

Remote control SP-11

5. Cleaning and care

The casing of the remote control can be cleaned with a moist cloth.

6. Disposal:

You must dispose of the remote controls through an authorised waste disposal company or a

communal waste disposal facility.

BACK LIGHT AND INDICATOR LIGHTS

Safety instructions

• The back light does not replace the prescribed light features for bicycles mentioned in

the German Road Trafc Act (StVZO Art. 67).

• When used properly, the back light serves to improve visibility.

• The back light is only intended for private use

• Please ensure that the back light is not covered or cannot be obscured by collars,

rucksacks or head movements.

• Parents should ensure that their child also regularly checks the functionality of the

back light.

• The back light is not a toy and may only be used by children under adult supervision.

• Please be aware that the indicator function on the helmet to indicate a change in

direction does not replace manual hand signals.

• Check before each use that the back light and indicator light functions work properly

in combination with the remote controls.

User information

1. Beforetherstuse

To be able to use the back light and the indicator lights, charge the battery for the helmet

and the remote control before the rst use.

You can read about the charging process in the previous chapters.

2. Functions

The back light has two different functions which can be used as you desire (Fig. M):

• Press once: Permanent light

Back light and indicator lights

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Crivit Motorradzubehör Handbücher

Crivit

Crivit 93726 Bedienungsanleitung

Crivit

Crivit SH-2307 Bedienungsanleitung

Crivit

Crivit 271517 Bedienungsanleitung

Crivit

Crivit EH-1430 Bedienungsanleitung

Crivit

Crivit 284742 Bedienungsanleitung

Crivit

Crivit KH-5782 Bedienungsanleitung

Crivit

Crivit SP-56 Bedienungsanleitung

Crivit

Crivit SP-803Y Bedienungsanleitung

Crivit

Crivit 271528 Bedienungsanleitung

Crivit

Crivit SP-91 Bedienungsanleitung

Crivit

Crivit 93719 Bedienungsanleitung

Crivit

Crivit 292222 Bedienungsanleitung

Crivit

Crivit EH-1430 Bedienungsanleitung

Crivit

Crivit 90095 Bedienungsanleitung

Crivit

Crivit EH-1430 Bedienungsanleitung

Crivit

Crivit SP - 501 Bedienungsanleitung

Crivit

Crivit 292227 Bedienungsanleitung

Crivit

Crivit 90095 Bedienungsanleitung

Crivit

Crivit SP-06 Bedienungsanleitung

Crivit

Crivit SP-602 Bedienungsanleitung

Crivit

Crivit 272278 Bedienungsanleitung

Crivit

Crivit 101538 Bedienungsanleitung

Crivit

Crivit 303613 Bedienungsanleitung

Crivit

Crivit 298519 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

SW-Motech

SW-Motech SBL.01.971.10000/B Bedienungsanleitung

GÜDE

GÜDE GSH 180-TC-2 Bedienungsanleitung