7
SECTION 3
PRODUCT IDENTIFICATION & SPECIFICATIONS
PRODUCT IDENTIFICATION
Where applicable, always use the Model and Serial
Number of the CropPak 12 Volt Sprayer when requesting
service information or when ordering parts.
Early models or later models may use different parts, or it
may be necessary to use a different procedure for specific
service operations.
SPRAYER PART & SERIAL NUMBER
Always use the serial number of the CropPak 12 Volt
Sprayer when requesting service information or when
ordering parts.
Where a serial plate is not provided, please use the part
number from the bar code affixed to this manual or the
Warranty & Pre-Delivery booklet.
GENERAL SPECIFICATIONS
Tank
The Croplands CropPak range of tanks is constructed from
a UV stabilised, medium density polythene for low distortion
qualities and tough impact resistance.
All models (except the US200/15), come standard with
a screw down main lid and basket strainer. A hand wash
tank is fitted standard for operator safety and can be used
to clean the suction filter in the field if needed. The skid
mounted versions feature a sump providing excellent suction
pick-up and allows the tank to completely drain.
Spray Lance & Hose reels
All CropPak models are supplied with a 6m hose and
Swissmex spray lance. Selected models are supplied with
10 metre hose & reel.
Controls
Standard on the 12-volt models is a pressure regulator
mounted on the pump outlet to regulate pressure & flow.
Liquid not required for the boom or reel is bypassed back to
tank. A pressure gauge is provided.
12-volt pumps are considered to be intermittent duty cycle
pumps and extended operating periods will trigger the
thermal overload switch. The motor must be allowed to
settle to a lower (ideally ambient) temperature before
recommencing operation.
An electric on/off switch and 15 amp fuse is provided in the
7m long power loom. Pump Model & Serial Number
The Pump Model & Serial Number is located on the pump.
This plate shows name of manufacturer, type & model
of pump, serial number, maximum voltage, maximum
amperage, maximum flow rate and maximum working
pressure of the pump.
For further information see the pump’s manual or Croplands
website – www.croplands.com.au and search in the Parts
Information section on the landing page.
BOOMS
Booms can be (option) fitted to the models using 15 & 20L/
min pumps, for use on utility vehicles and some RTV’s.
See Croplands Compact Sprayers Buyers Guide for details of
2,3,4 and 6 metre booms and mounting kits for these models.
A separate boom manual will be supplied with your boom
should you purchase a boom to suit your CropPak.
Other models utilising Honda motors are available.
See the Croplands Compact Sprayers Buyers Guide for
further information.
Bar code
Serial number plate
