Crosley CR7010A-BK Bedienungsanleitung

CLASSICAL TURNTABLE WITH AM/FM RADIO

MODEL: CR7010A-BK

Operating Instructions Manual

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITHAN EXTEN-

SION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE THISAPPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

1) Please read these instructions and keep them for future reference.

2) Pay attention to all warnings.

3) Follow all instructions.

4) Do not use this apparatus near water.

5) Clean only with a dry cloth.

6) Do not block any ventilation openings.

7) Install in accordance with the manufacturer's instructions. Do not install near any

heat sources such as radiators, heaters, stoves, or other apparatus (including am-

plifiers) that produce heat.

8) Protect the power cord from being walked on or kinked, where the plug is fitted and

at the point where it exits from the apparatus.

9) Only use attachments / accessories specified by the manufacturer.

10) Unplug this apparatus during lightning storms unused for long periods of time.

11) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the ap-

paratus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

12) This appliance should not be exposed to dripping or splashing water and no

object filled with liquids, such as vases, should be placed on the apparatus.

13) overload the wall power outlet. Use only power source as indicated - i.e. 120V

mains.

Avoid installing this unit in places exposed to direct sunlight or close to heat radiating

appliances such as electric heaters, on top of other stereo equipment that radiates too

much heat, places lacking ventilation or dusty areas, places subject to constant vibra-

tion and/or humid or moist areas. Do not attempt to clean this unit with chemical sol-

vents as this might damage the finish. Use a clean dry cloth. Operate controls and

switches as described in the manual. Before turning on the power, make certain the AC

power cord is plugged in.

Store your CDs, Cassettes in a cool area to avoid damage from heat. When moving the

set, be sure to first disconnect the power cord.

UNPACKING AND SET UP

● Carefully remove the unit from the display carton and remove all packing material

from the unit.

● Unwind the AC power cord and extend it to its full length.

● Unwind the FM Antenna wire and extend it to its full length.

● Place the unit on a stable, level surface, convenient to an AC outlet, out of Direct

sunlight, and away from sources of excess heat, dust, moisture, humidity or strong

magnetic fields.

● Remove the opaque white plastic stylus cover from the phonograph stylus by sliding

it forward and down.

● Discard the stylus cover

● Remove the twist-tie that was used to secure the tone arm during shipment.

● Release the tone arm lock lever.

●Connect the plug to your AC outlet.

POWER SOURCE

This product is designed to operate on 100V -240 AC power adaptor. Attempting to

operate this system from any other power source may cause damage to the system,

and such damage is not covered by your warranty.

LOCATION OF CONTROLS AND INDICATORS

1) Dust Cover

2) LCD display

3) Bluetooth Indicator

4) Cassette Door

5) Cassette operation buttons

6) IR Remote Receiver

7) CD Door

8) Aux In Jack

9) Headphone Jack

10) Tuning Knob

11) Power Switch & Volume Knob

12) Function Selector Buttons

13) CD Control Buttons

14) CD-Rom Open/close button

15) Speaker Grill

PHONOGRAPH

16) Turntable

17) Transit Screw

18) Cue Lever

19) Speed Selector (33 / 45 / 78 RPM)

20) Tone arm Lock

21) Tone Arm

REAR PANEL

22) RCA Line out jack

23) FM wire antenna

24) AC power adaptor socket

REMOTE CONTROL

25) Mute button

26) Program button

27) Repeat button

28) Function Mode button

FM-AM-PHONO/AXU-CD

BLUETOOTH-TAPE

29) Skip down button

30) Play/Pause button

31) Random button

32) Stop button

33) Skip up button

34) Folder up button

35) Folder down button

OPERATING INSTRUCTIONS

Listening to radio

1. Turn the volume knob in a clockwise direction to turn the equipment on.

2. Use the function selector to select TUNER mode.

3. Use the radio band selector to select the desired band (AM, FM or FM-Stereo).

4. Turn and hold the tuning knob for a few seconds to tune into a radio station.

The unit will start searching automatically and stop when a radio station is

found. Release the knob once a station has been found.

5. Repeat the above step until your desired radio station is found.

6. Adjust the volume knob to your desired volume level.

7. AM reception: the receiver has a built-in AM bar antenna. If reception is

weak, slightly rotate or reposition the unit to improve AM reception.

8. FM reception: the receiver has a built-in FM wire antenna hanging at the

rear cabinet. For best reception, completely unravel and extend this wire.

9. When you have finished listening to the radio, turn the volume knob in a

counterclockwise direction to switch the unit off. Unplug it from the power sup-

ply if you are not going to use it for a while.

FM and FM-stereo

⚫FM-Stereo : Receiving stereo programs. Once a stereo signal is received, the

ST icon will light up on the display.

Phono Operation

1. Open the dust cover and turn the volume knob clockwise to turn the equipment

on.

2. Use the function selector to select PHONO mode.

3. Set the speed selector to the appropriate position: 33, 45 or 78, depending on

the record to be played.

4. Place the record on the turntable (use the 45 rpm adaptor, if required).

5. Move the lift lever towards the back to raise the tone arm from the arm park,

then gently move the arm to the record, The turntable will start rotating.

6. Move the lift lever towards the front, the tone arm will gently drop onto the

record and playback will start.

7. At the end of the record, the Tone arm will auto stop and return back to the

Tone arm holder.

8. To play a different piece on the record, move the lift lever towards the back, move

the raised tone arm to the start of the piece and then move the lift lever towards

the front to lower the tone arm and start playback.

9. To adjust the volume level, turn the volume knob to the right or left.

Cassette Operation

1. Cassette Button Indicators

2. Cassette Button Control

a) RECORDER-------Copy RADIO / PHONO /AUX IN / CD to TAPE

b) PLAYER--------------Play tape tracks

c) REVERSE

d) FORWARD

e) STOP/EJECT----1st push –Cassette function stop, 2nd push open cassette

door

f) PAUSE-----------------Pause when cassette in PlayBack mode.

3. Cassette PlayBack Control Operating

1) TAPE Play:

a) Function Choose to “TAPE” mode---Push “EJECT” key under tape----Open cassette

tape door-----put your tape into cassette dock----Manual close the tape door –Press

“PLAYER” Key ------ To adjust the volume level for your preference, turn the vol-

ume knob to the right or left

b) Press “PAUSE” button once to stop playing, press it again to continue

C) When TAPE tracks play ending, “PLAYER” Key up automatically.

2) REVERSE ----------When Cassette Stop -------Press “REVERSE”.

3) FORWARD----------When Cassette Stop -------Press FORWARD.

4) STOP/EJECT-----1st push –Cassette function stop, 2nd push open cassette

5) RECORDER----Recording from RADIO / PHONO /AUX IN / CD to TAPE

a) RADIO / PHONO /AUX IN / CD-------During playing -------Press

Tape”EJECT”----Open tape door-----Put a blank tape into Cassette Dock----close the

door-----Press RECORDER&PLAYER together same time-----Now start the recording

songs to the tape------- Press “PAUSE” button if need to pause recording , press it

again to continue recording.

b) Press “STOP” to stop recording.

c) When recording finished (Tape is full-end), “RECORDER&PLAYER “Auto Key-up.

IMPORTANT!

When using the cassette deck :

⚫Make sure to insert the cassette in the correct direction.

⚫To avoid damaging the cassette, we strongly recommend

taking it out of the equipment after playing the cassette

⚫In case erase tape tracks by improper operation, you can choose

take off anti-erase tap (write protection) to finalize the

recorded-tape. For the same principle,if take off anti-erase

tap,this tape would not be able to write new

contents/songs.

(Anti-erase taps position)

CD Operation

1. Turn the volume knob clockwise to turn the equipment on.

2. Press the CD-Rom switch ,then the disk tray door opens .

3. Place the CD face up inside ,making sure it is fully placed .Then press the

CD-Rom switch again ,the disk tray door closes .

4. To play a track on CD

-Press the skip up or skip down button to select the desired tracks.

-Press Repeat, press button to play one & Folder (if any) & All repeatedly

- Press Random, to play tracks in randomly

5. To adjust the volume level, turn the volume knob to the right or left.

Playback controls

PLAY/PAUSE Press this button once to stop playing, press it again to continue.

STOP Press this button to stop audio playback,

SKIP UP Press this button once to play the next file, press and hold this button

to fast forward through the files/tracks.

SKIP DOWN Press this button once to play the previous file, press and hold this

button to fast reverse through the files/tracks.

TUNING KNOB Turn this knob to the right/left to search a folder backward or forward.

REPAT Press to play one & repress- Folder(If any) & Repress- All repeatedly

The auxiliary input

Listening to a CD (or other auxiliary input)

1. Turn the volume knob clockwise to turn the equipment on.

2. Use the function selector to select PHONO/AUX mode, then connect the external

audio device (such as a CD player) to the AUX IN socket The audio signal from

the external audio device will now be played through the system.

3. If an external audio device is connected to the AUX IN socket, playing of the aux-

iliary device takes priority over cassette playback.

Bluetooth input -Receiver

Listening to IPhone (or other Bluetooth input devices)

1. Turn the volume knob clockwise to turn the equipment on.

2. Use the function selector to select Bluetooth mode.

3. Press “Bluetooth”button on panel or remote. LED indication Red color and flashing.

When succeed in connecting, LED color in red and stable.

4. Activate the Bluetooth function in your Bluetooth device (such as Mobile Phone);

the device will enter to Bluetooth searching automatically, if not, tap the relate selec-

tion to manually enter to searching mode.

5-Your Bluetooth device show “CROSLEY CR7010” in list, and then select it for

pairing.

6- Start to music play on your Bluetooth device when the device is in paired and show

connected. (If not, select / tap the relate menu and choose “connect” to connect the

Bluetooth turntable manually. It’s depended on your Bluetooth device version and

designed function.)

Inhaltsverzeichnis

Andere Crosley MP3-Player Handbücher

Crosley

Crosley ANIMATED CONCERTINA Bedienungsanleitung

Beliebte MP3-Player Handbücher anderer Marken

Blaupunkt

Blaupunkt Compact Drive MP3 Bedienungsanleitung

Memorex

Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung

Meizu Electronic Technology

Meizu Electronic Technology E5 Bedienungsanleitung

Naxa

Naxa NMV-173NX Bedienungsanleitung

Philips

Philips PSA250 Bedienungsanleitung

Zipy

Zipy go! Waving Bedienungsanleitung

Sylvania

Sylvania SMPK4068 Bedienungsanleitung

Sony

Sony NW-MS7 - Memory Stick Walkman Bedienungsanleitung

Irradio

Irradio RF-42UC Bedienungsanleitung

NABAIJI

NABAIJI SWIM MUSIC 100 Bedienungsanleitung

Laser

Laser MP3-A9-4GB Bedienungsanleitung

Samsung

Samsung YP-T7F Bedienungsanleitung

Savant

Savant SMS-1001-00 Kurzanleitung

Trevi

Trevi XP 71 BT Bedienungsanleitung

AGPtek

AGPtek C2 Bedienungsanleitung

MobiBlu

MobiBlu DAH-1500i Bedienungsanleitung

Denver

Denver MPS-201 Bedienungsanleitung

Steren

Steren MP3-002 Bedienungsanleitung