Basic Operation
The unit has 2 basic functions, playing audio files & loading audio
files.
Playing Audio Files
Power – Squeeze and Hold the Power Key for 1 second. Red
LED in Heart should begin blinking. If the LED does not begin
blinking, make sure you held the Squeezed the Power button
for 1 second. If the LED still does not begin blinking, replace
the batteries.
Play Music - When the LED is on (blinking or solid), squeeze and
hold the icon of the desired song bank for 1 second. The se-
lected song bank will play. Lulla-Bear will power off 10 seconds
after the song bank has played.
Scroll – To scroll through the songs in any song bank, activate the
bank and then squeeze the icon of the active bank until you
reach the desired song.
Change Song Bank – When the LED is on (blinking or solid), you may
switch banks at any time by squeezing the icon of desired
song.
Volume Up - While a song bank is playing, squeeze “V+” to increase
the volume.
Volume Down – While a song bank is playing, squeeze “V-” to
decrease volume.
Power will turn OFF Automatically when - End of song bank is
reached. No song bank is selected for 1 minute after Power is
activated
Powering Off - Squeeze and Hold Power Key for 1 second. LED
Indicator Red Light will turn off.
REMOVE BATTERY
SAVER TAB BEFORE
USE!
Lulla-Bear™ User Manual
Please read operating instructions carefully before use.
Basic functions
• Supports Music Format:
MP1 MP2 MP3 WMA WAV
• Supports High Speed: USB 2.0
• LED Light-Red
Definition of button functions
Power
Increase Volume
Decreases Volume
Plays Lullaby Song Bank
Plays Happy Song Bank
Plays Nature Song Bank
V+
V-
To Replace Batteries:
1. Remove the Battery Cover Screw,
2. Slide Battery Cover off Battery Case,
3. Remove old Batteries and Discard
Appropriately,
4. Place 3 New AA Batteries in the Battery
Compartment (Lithium are suggested),
5. Replace Battery Cover & Screw
