- 7 -
17. The manufacturer has already set the oper-
ating voltage at 230V. For the conversion of
the operating voltage, please refer to the
voltage selector section of this instruction.
18. This hair dryer is intended for household
use. If overheating should occur, the built-in
thermostat will automatically shut off the
heat. When this happens, unplug this hair
dryer and let is cool for at least 10 minutes,
then plug it back in and use it normally.
Should the unit continue to overheat, return
it to the nearest authorized service facility
for repair.
19. Never connect the plug before setting the
voltage selector switch to the correct voltage
setting.
20. To avoid a circuit overload, do not operate
another high wattage appliance on the same
circuit.
21. Do not iron hard articles, such as buttons, as
this will scratch the soleplate.
22. Do not polish soleplate of the iron this metal-
lic brush, polishing powder ora chlorine
bleaching agent.
