Crown Broadcast
2524 Toledo Road
Elkhart, IN 46516
U.S.A.
Phone: 574-262-8900
Fax: 574-970-8909
Service: 574-218-6547
service@irec1.com
4
Chapter 1 Unpacking and setting up
1.1
Unpacking
Open the package to be sure the following items are included
A)
The Companion
B)
15 or 25 DBA connector cable.
C)
Ifany items arenot included, please contact our office.
1.2
DBA Connectors
The back of The Companion
J5 & J6 are paralleled J3 & J4 are paralleled J1 & J2 are paralleled
Therefore, either use all odd or all even together.
If you have a Crown Transmitter with a cream or silver front panel, you
need a 15 pin DBA cable and will plug into J1. If your transmitter has a green
front panel, you should be able to use a 25 pin DBA cable and will plug into J3.
If you have a Crown Classic 1k, 2k, or 4k, that unit will need to be
plugged into J5. If your driver has a cream or silver front panel (15 pin), plug
the driver into J1 if you are also plugged into J5. If your driver has a green
front panel (25 pin), plug into J3 if you are using J5.
If you are using equipment other than Crown Classic transmitters, then
you will need to plug into J1, J3, or J5 or any mix of those three. You can also
plug into J2, J4 or J6 or any mix of those three. However, you cannot plug into
J1 & J2 or J3 & J4 or J5 & J6. Just remember –all odd or all even!
