CRU Dataport 25 Bedienungsanleitung

DataPort 25

Manual

DataPort

“

www.CRU-DataPort.com

About CRU-DataPort Table of Contents

Founded in 1986 and based in Vancouver, Washington, CRU-DataPort

develops and markets computer data security and storage devices. The

company’s DataPort™ brand of removable storage modules, with over

2,000,000 units installed in computers worldwide, has become the de

facto standard for Data Security, and the recognized name when it

comes to removable storage modules for government, education and

corporate IT departments. DataPorts are rated for 25,000 insertions

and include fans to protect your disk drive.

About CRU-DataPort................................................................................. ii

General Description..................................................................................1

Package Contents ....................................................................................1

General Configuration/Operation Information ............................................1

IDE operation......................................................................................1

Serial ATA operation ............................................................................2

Carrier removal ...................................................................................2

CRU-DataPort products are available through major distributors, OEMs,

VARs, and a host of resellers and systems integrators throughout the

world. For more information about CRU-DataPort, visit our website at

www.CRU-DataPort.com.

Preparation for Installation .......................................................................3

Frame Installation ....................................................................................4

Hard Drive Activity LED ............................................................................ 5

Mounting a Hard Drive in the Carrier .........................................................5

Technical Support ....................................................................................5

Limited Product Warranty .........................................................................6

Product Remedies ....................................................................................6

Limitation of Liability ................................................................................6

Page ii www.CRU-DataPort.com www.CRU-DataPort.com Page iii

General Description

The DataPort™ 25 is a portable storage device for your computer hard

drive that can be easily removed from the computer. The DataPort 25

consists of a frame and carrier with dual 2.5" drive support mounting

chassis and metal front bezel clamshell cover. The frame can be fitted

into any standard 3.5" floppy drive bay.

Package Contents

The DP25 includes all of the hardware necessary to install a 2.5" hard

drive in a 3.5" floppy drive bay. Before installing, verify that the

following items have been included in the package (the contents may

come packaged inside the carrier):

www.CRU-DataPort.com Page 1

Quantity Description

1 DataPort 25 frame assembly

1 DataPort 25 carrier assembly

8 M3 x 4mm" Phillips pan-head screws for hard

drive mounting

4 M3 x 5mm Phillips pan-head screws for frame

mounting with rails

4 M3 x 4mm Phillips pan-head screws for frame

mounting in case

2 M3 x 4mm Phillips pan-head screws for carrier

cover mounting

2 Keys for lock

General Configuration/Operation Information

The DataPort™ 25 IDE carrier can be configured with either one or two

IDE or Serial ATA 2.5" drives that can be easily removed from the

computer. The universal frame will accept either an IDE or a Serial ATA

carrier and with the proper cabling can provide access to those drives

by the OS.

Note: There is a configuration management feature that will cause

the green power on LED to flash off and on if the installed

carrier does not have correct cabling from the frame to the

system when the DataPort 25 is powered on.

IDE operation

For IDE operation, the frame board 40-pin connector (JP2) must be

cabled with an ATA66 80-conductor ribbon cable to either an IDE host

bus adapter or the primary or secondary IDE channel on the

Motherboard. Since there can be two IDE drives installed in the carrier,

DO NOT install any other devices on the same channel as the

Page iv www.CRU-DataPort.com

DataPort 25. When multiple IDE drives are used, they have to be

jumpered such that there is one drive as a master and one drive as a

slave. Since both drives are off the same cable connector, jumpering as

cable select is NOT supported.

Serial ATA operation

For Serial ATA operation, the lower drive in the carrier is connected to

the left-most Serial ATA data connector on the rear of the frame (JP4).

The upper drive is connected to the right-most data connector (JP5).

These cables can be up to 1000 mm in length. There is also a 2-pin

header on the frame of which pin 1 can be connected to the host

activity open collector LED driver.

Figure 1 – Back

To support both carrier types, connect all three data cables to the

DataPort 25 frame board.

WARNING!

Unlock the DataPort 25 before attempting to remove the

carrier.

Carrier removal

To remove the carrier, first make sure the ejection lever is fully

extended. Then gently press it in to eject the carrier.

www.CRU-DataPort.com Page 3

Figure 2 – Ejection lever

Preparation for Installation

1. To prevent data loss, read this manual thoroughly before installing

or operating the DataPort.

2. Before touching any electrical equipment, ground yourself by

touching the metal part of your computer chassis to discharge

static electricity and help prevent any damage to your computer.

CRU-DataPort is not responsible for static discharge

damage.

3. Gather the following tools and needed items:

•Philips screwdriver

•Small flat-head screwdriver

•Computer Users Manual

•Internal IDE or Serial ATA data cable(s)

•Available Serial ATA port(s) (Serial ATA version)

Page 2 www.CRU-DataPort.com

8. Locate the data cable and connect it to the connector on the rear

of the frame.

Frame Installation

9. Connect the DC power cable to the frame by locating an available

4-pin DC floppy style power cable from the computer power supply

and then plugging it into the power plug (JP3) on the frame.

WARNING!

Only use screws provided by CRU to install your DataPort 25 frame.

Use of standard M3 screws will prevent proper functionality of your

DataPort 25.

1. Turn off the computer and disconnect its power cord from the

electrical outlet.

Figure 4 – Location of JP3 Power Plug

2. Wait one minute for any residual energy to dissipate from your

computer.

3. Remove the cover of the computer.

4. Locate an empty externally accessible 3.5" bay in which you will

mount the DataPort frame assembly, and then remove any filler

plates that may be present. The frame installation is now complete.

5. If the drive bay requires mounting rails, install one on each side of

the frame. The mounting rails should be provided with your

computer system.

Hard Drive Activity LED

The front of the DataPort 25 has two LEDs: a green LED that lights up

when the power to the hard drive is on, and an amber LED that lights

up when activity is taking place on the hard drive.

6. Mount the frame assembly by sliding the frame into the 3.5" bay

from the front of the PC case.

7. Using the screws provided, secure the frame assembly to the

computer case using the frame’s side mounting holes (see Figure

3). Your DataPort frame also has bottom mount holes in case you

need to bottom mount the unit.

Mounting a Hard Drive in the Carrier

1. Remove the two screws from the back of the carrier. Slide the

metal cover off.

2. Install the first drive in the carrier. Connect the drive to the

connector in the carrier and use the four screws provided to mount

the drive.

Figure 3 – Location of mounting holes

Side mountin

holes

3. If there is a second hard drive, install it now.

Bottom mountin

holes

www.CRU-DataPort.com Page 5

4. After the drive has been installed, slide the cover over the drive

mounting chassis and insert the screws in the rear of the cover to

secure it.

5. Insert the carrier into the frame assembly. Ensure that the lock is

in the OPEN (vertical) position.

6. Once the carrier has been seated in the frame the keylock must be

turned clockwise 90 degrees (horizontal) to engage the mechanical

lock and enable power to the devices in the carrier.

You have finished the installation and your DataPort 25 is ready to

operate.

Technical Support

Please visit our website for the latest information and technical support

options: http://www.CRU-DataPort.com.

Page 4 www.CRU-DataPort.com

Limited Product Warranty

CRU-DataPort warrants the DataPort 25 to be free of significant defects

in material and workmanship for a period of three (3) years from the

original date of purchase. CRU-DataPort’s warranty is nontransferable

and is limited to the original purchaser.

Product Remedies

CRU-DataPort’s entire liability and the original purchaser’s exclusive

remedy for any breach of warranty shall be, at CRU-DataPort’s option,

either (a) return of the price paid, or (b) repair or replacement of the

hardware, provided that the hardware is returned to CRU-DataPort with

a copy of the sales receipt or applicable documentation. Any

replacement hardware will be warranted for the remainder of the

original warranty period.

These remedies are void if the hardware fails because of accident,

abuse, misapplication, or modification (this will be determined by CRU-

DataPort).

Limitation of Liability

The warranties set forth in this agreement replace all other warranties.

CRU-DataPort expressly disclaims all other warranties, including but not

limited to, the implied warranties of merchantability and fitness for a

particular purpose and non infringement of third-party rights with

respect to the documentation and hardware. No CRU-DataPort dealer,

agent or employee is authorized to make any modification, extension,

or addition to this warranty. In no event will CRU-DataPort or its

suppliers be liable for any costs of procurement of substitute products

or services, lost profits, loss of information or data, computer

malfunction, or any other special, indirect, consequential, or incidental

damages arising in any way out of the sale of, use of, or inability to use

any CRU-DataPort product or service, even if CRU-DataPort has been

advised of the possibility of such damages. In no case shall

CRU-DataPort’s liability exceed the actual money paid for the products

at issue.

CRU-DataPort reserves the right to make modifications and additions to

this product without notice or taking on additional liability.

Revision 1.0

Page 6 www.CRU-DataPort.com

Inhaltsverzeichnis

Andere CRU Dataport Lagerung Handbücher

CRU Dataport

CRU Dataport DX115-DC Bedienungsanleitung

CRU Dataport

CRU Dataport ToughTech Duo-QR Bedienungsanleitung

CRU Dataport

CRU Dataport RTX410-3QJ Bedienungsanleitung

CRU Dataport

CRU Dataport RTX100-3SJ Bedienungsanleitung

CRU Dataport

CRU Dataport RTX 100-3Q Bedienungsanleitung

CRU Dataport

CRU Dataport HotDock Bedienungsanleitung

CRU Dataport

CRU Dataport DataPort 25 Enhanced Carrier Bedienungsanleitung

CRU Dataport

CRU Dataport DataPort V Bedienungsanleitung

CRU Dataport

CRU Dataport Data Express DX115 SAS/SATA 6G Bedienungsanleitung

CRU Dataport

CRU Dataport DataPort SecureDock AES 128 Bedienungsanleitung

CRU Dataport

CRU Dataport DataPort 10 Bedienungsanleitung

CRU Dataport

CRU Dataport Data Express DX115 SAS/SATA 6G Bedienungsanleitung

CRU Dataport

CRU Dataport RTX Secure 410-QR Bedienungsanleitung

CRU Dataport

CRU Dataport RTX Secure 410-QR Bedienungsanleitung

CRU Dataport

CRU Dataport RTX400H-SV Bedienungsanleitung

CRU Dataport

CRU Dataport 2U DataCase Bedienungsanleitung

CRU Dataport

CRU Dataport 25d Bedienungsanleitung

CRU Dataport

CRU Dataport Dataport 25 SL Bedienungsanleitung

CRU Dataport

CRU Dataport RTX Secure 410-3QR RTXS410-3QR Bedienungsanleitung

CRU Dataport

CRU Dataport Dataport 25 SL Bedienungsanleitung

CRU Dataport

CRU Dataport LP Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung