Table of Contents
PI 500 Seite 4von 93
7.3 Main menu (Home) 21
7.3.1 Initialization 21
7.3.2 Main menu 22
7.3.2.1 Settings 23
7.3.2.1.1 Password-Settings 23
7.3.2.1.2 Sensor-settings 24
7.3.2.1.2.1 Choice of the sensor type (For example type CS-Digital sensor) 25
7.3.2.1.2.2 Name the measurement data and define the decimal places 26
7.3.2.1.2.3 Recording measurement data 26
7.3.2.1.2.4 Alarm-Settings (Alarm Popup) 27
7.3.2.1.2.5 More Settings (scale analogue output) 28
7.3.2.1.2.6 Dew Point Sensor of type CS-Digital (SDI Bus) 29
7.3.2.1.2.7 Consumption Sensor of type CS-Digital (SDI Bus) 30
7.3.2.1.2.8 Dew Point Sensor FA 500 / FA 510 of type FA 5xx (RS 485 Modbus) 33
7.3.2.1.2.8.1 Settings Dew point sensor FA 500 FA 510 34
7.3.2.1.2.9 Flow sensor of type VA 5xx (RS 485 Modbus) 37
7.3.2.1.2.9.1 Settings for Flow sensor VA 5xx 38
7.3.2.1.2.9.2 Diameter settings (only for VA 500 or VA 550) 38
7.3.2.1.2.9.3 Gas Constant settings 39
7.3.2.1.2.9.4 Definition of the reference conditions 40
7.3.2.1.2.9.5 Definition Unit of flow and velocity 40
7.3.2.1.2.9.6 Definition consumption counter value and consumption unit 41
7.3.2.1.2.9.7 Settings analogue output 4-20mA of VA 5xx 42
7.3.2.1.2.9.8 Settings Pulse / Alarm output of VA 5xx 43
7.3.2.1.2.9.9 Settings ZeroPoint or Low Flow Cut off for VA 5xx 44
7.3.2.1.2.10 Configuration of Analogue-Sensors 45
7.3.2.1.2.11 Type 0 - 1/10/30 Volt and 0/4 –20 mA 45
7.3.2.1.2.12 Type PT100x and KTY81 47
7.3.2.1.2.13 Type Pulse (Pulse ration) 48
7.3.2.1.2.14 Type „No Sensor“ 50
7.3.2.1.2.15 Type Modbus 51
7.3.2.1.2.16 Selection and activation of Sensor-Type Modbus 51
7.3.2.1.2.16.1 Modbus Settings 51
7.3.2.1.3 Data logger Settings 55
7.3.2.1.4 Device Settings 59
7.3.2.1.4.1 Language 59
7.3.2.1.4.2 Date & Time 60
7.3.2.1.4.3 SD-Card 61
7.3.2.1.4.4 System update 62
7.3.2.1.4.4.1 Check for new Software updates (USB) 62
7.3.2.1.4.5 Factory Reset 64
7.3.2.1.4.6 Calibrate touch-screen 65
7.3.2.1.5 Set backlight 65
7.3.2.1.6 Cleaning 66
7.3.2.1.7 System-Status 66
7.3.2.1.8 About PI 500 66
7.3.2.2 Chart 67
7.3.2.3 Chart / Real time values 71
7.3.2.4 Channels 73
7.3.2.4.1 Min/Max Function 73
7.3.2.5 Real time values 75
7.3.2.6 Alarm overview 76
