CSL DUALCOM PRO Montageanleitung
DUALCOM PRO - AERIAL FITTING GUIDE
DualCom Pro - Aerial Fitting Guide
Guide
INTRODUCTION
In order to ensure your DualCom Pro achieves the best possible signal available we
encourage you to complete the following steps.
Step 1 - Use a Signal Analyser to determine the optimum location for the aerial/s
and follow the advice from the Signal Analyser section below.
Step 2 - If you do not have a Signal Analyser, power up the DualCom Pro, connect
the aerial/s, go through the commissioning process and check the signal strength
before permanently fitting the aerial. We recommend a signal strength on the
DualCom Pro of at least 3 (30%)
or above.
STEPS 3 & 4 ARE ONLY IF YOU ARE FITTING A DUAL RADIO AERIAL.
PLEASE SKIP TO STEP 5 IF YOU ARE FITTING A SINGLE RADIO
AERIAL.
Step 3 - If you are using a dual radio product, make sure that both aerials are at
least 2 metres apart.
Step 4 - If using a dual radio product, position the aerials in a vertical orientation.
Step 5 - Keep your devices aerial/s cables away from high voltage cables or any
other aerial cables.
Step 6 - Keep your aerial/s in open space and 1 metre away from large metal
objects or sources of interference (i.e. wiring, lighting, electrical installations,
computers, control panels, fuse boards, routers, etc.)
Step 7 - Do not tightly coil any excess aerial cable. Try and make large loops if
possible.
See below for examples of good and bad single & dual aerial set-ups.
Figure 1 - Single Aerial Installs Good & Bad
Figure 2 - Dual Aerial Installs Good & Bad
CSL SIGNAL ANALYSER - CS2389
Using the Signal Analyser, you must ensure that there are enough base stations (2 or
more) available at the site and that they can supply sufficient signal strength (30%
and above). This device will help determine the optimum location for the DualCom’s
aerials to be mounted.
Inhaltsverzeichnis
Andere CSL Sicherheitssystem Handbücher
CSL
CSL DigiAir Pro 3 Betriebsanleitung
CSL
CSL MiniAir Bedienungsanleitung
CSL
CSL DualCom UDL Bedienungsanleitung
CSL
CSL DualCom Pro Series Bedienungsanleitung
CSL
CSL GradeShift Bedienungsanleitung
CSL
CSL DualCom Pro Series Bedienungsanleitung
CSL
CSL DualCom Pro Visonic PowerMaster Bedienungsanleitung
CSL
CSL DualCom Pro Bedienungsanleitung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung