3
I
CTC MAXX Box solutions allow for the monitoring of remotely mounted vibration
sensors, which would otherwise be restricted to human access due to safety
considerations.
MX333 Series MAXX Box Overview: Sixteen triaxial sensor inputs (48
measurement channel outputs), fiberglass enclosure
The MX333 is a fiberglass enclosure designed for data collection of up to 16
triaxial accelerometers. The MX333 provides connection of the four-conductor
input wiring for a maximum of 16 triaxial accelerometers for portable data
collection. Data is collected via four, four-pin output connectors compatible
with Azima DLI Data Collector Cables. Input wiring from the sensors is wired to
the outputs via terminal blocks located behind the hinged output panel. Inputs
available on each terminal block include positive and negative for each axis or
sensor signal, and one input for the shield drain wire that is grounded via an
external ground stud mounted to the side of the fiberglass enclosure.
All MX333 enclosures feature a hinged cover with a mounted snap latch to
protect each four-pin connector when not in use. Rated for NEMA 4X (IP66), the
box is resistant to hose-directed fluid and corrosion and is rated for temperatures
ranging from -58°F to 180°F (-50°C to 82°C).
