CTX PV411S Bedienungsanleitung
English
1
Usage Notice
Precautions ................................................................................. 2
Introduction
About the Product ....................................................................... 3
Package Overview...................................................................... 4
Installation
Product Overview........................................................................ 5
Start Your Installation .................................................................. 7
User Controls
Front Bezel Controls ................................................................... 11
How to Use the OSD Menus....................................................... 13
On-Screen Display Menus ......................................................... 14
Appendices
Troubleshooting........................................................................... 16
Product Dimensions ................................................................... 17
Compatibility Modes ................................................................... 18
Table of Contents
2
English
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recom-
mended in this user’s manual to maximize product usage life.
Do:
!Turnofftheproductbeforecleaning.
!Use only a dry soft cloth or clean room wiper when cleaning the
LCDpanelsurface.
!Use a soft cloth moistened with mild detergent to clean the
displayhousing.
!UseonlytheAC/DCpoweradapterprovidedbymanufacturer.
!Disconnect the power plug from AC outlet if the product will not
be used for a long period of time.
Don’t:
!Do not touch the LCD panel surface with sharp or hard objects.
!Donot use abrasivecleaners,waxesor solvents foryour
cleaning.
!Donotoperate the productunderthefollowing conditions:
- Extremelyhot, cold orhumidenvironment.
- Areas susceptible to excessive dust and dirt.
- Nearanyappliance generating astrongelectronicmagnetic,
emission/radiationfield.
- Direct sunlight place.
English
3
Introduction
AbouttheProduct
Having a 14.1” inch flat panel screen with an active, thin-film
transistor (TFT) liquid crystal display (LCD) , this product also demon-
strates following outstanding features.
!DirectanalogRGB input
!14.1”diagonal screen size
!16.7million displayable colors
!1024x 768 resolution
!XGA/SVGA/VGA/VESAcompatible
!31~50kHzhorizontalscan
!60~70Hzrefreshrate
!Auto adjustment capability
!Fullscreenre-scaling
!MultilingualOSDmenus infivelanguages:English,French,
German,Spanish,andItalian
!USB hub with 1 upstream and 4 downstream ports on the
standbase
!VESA DDC 1/2B data communication
!VESADPMSpower saving
!Standwith tiltand cable managementfunctions
!VESAstandard 75mmx75mm mountinginterface
4
English
Package Overview
LCDDisplay
VGA Signal Cable USBUpstreamCable
InstallationDiskette
(forDDC1/2B)
PowerAdapter
PowerCord
User’sManual WarrantyCard
English
5
Power
Installation
Product Overview
"MainUnit
"Rear View
LCD Display
Stand
CableManagement
Device
User Controls
6
English
"Connectors
Display Rear Connectors
Display Stand Back USB Hub Ports
USBUpstream Port
4 USB Downstream
Ports
DC Power-In
Display Input
English
7
StartYourInstallation
VGA Cable
AC Power Cord
AC/DC Power
Adapter
"Connecting the Display
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is off.
2. Connect the VGA signal cable from display input connector to the 15-pin
connector of your host computer and tighten the screws.
3. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and then the other end into an
electrical outlet.
Notice: To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1024 x 768 resolution and make sure timing
of the display mode is compatible with the LCD display. We have
listed the “Compatibility Modes” of this LCD display in appendices
for your reference.
8
English
"Display and system setting
For the optimum display of your monitor, please follow the procedures
as below.
1. Adjust the vertical refresh of your graphic card to 60Hz:
a. If the monitor setting of your computer provides vertical
refresh selection, set the vertical refresh to 60Hz.
b. If the monitor setting of your computer does not provide the
vertical refresh selection:
b-1. Check your graphic card driver, if the driver supports vertical
refresh selection, install the driver and set to 60Hz.
b-2. If the driver does not provide the vertical refresh selection,
please contact your graphic card’s dealer for a vertical refresh
selection supported driver.
2. Activate the Auto-Adjustment function to obtain optimum image
by pressing “S/A” button.
3. If necessary, pop up the OSD menu and use the “Horizontal
Position”, “Vertical Position”, “Frequency”, “Tracking” adjustments
to fine-tune the display image.
English
9
"USBHub
#
$
$USB Downstream Ports
These four USB ports are available for connecting USB type peripheral
devices such as keyboard, mouse, printer and so on.
#USB Upstream Port
This port is for connecting the USB Upstream cable to computer’s or
other hub’s USB port.
10
English
"CableManagement
1. Route the cables through the cable management device.
2. Connect the cables to their respective connectors on the back panel of
the display.
CableManagement
Device
Inhaltsverzeichnis
Andere CTX Monitor Handbücher
CTX
CTX VL700SL Bedienungsanleitung
CTX
CTX P772 Bedienungsanleitung
CTX
CTX VL700SL Bedienungsanleitung
CTX
CTX X50 Bedienungsanleitung
CTX
CTX PR1400F Bedienungsanleitung
CTX
CTX PR700 Bedienungsanleitung
CTX
CTX VL510 Bedienungsanleitung
CTX
CTX VL950SL Bedienungsanleitung
CTX
CTX VL950 Bedienungsanleitung
CTX
CTX PR700 Bedienungsanleitung
CTX
CTX CMS-3435 Bedienungsanleitung
CTX
CTX VL510 Bedienungsanleitung
CTX
CTX E22M5G Bedienungsanleitung
CTX
CTX VL700 Bedienungsanleitung
CTX
CTX PV510 Bedienungsanleitung
CTX
CTX VL400 Bedienungsanleitung
CTX
CTX PL7 Bedienungsanleitung
CTX
CTX VL701 Bedienungsanleitung
CTX
CTX PV500A Bedienungsanleitung
CTX
CTX S700A Bedienungsanleitung
