CTX PV511 Bedienungsanleitung
English
1
Usage Notice
Precautions................................................................................... 2
Introduction
About the Product ......................................................................... 3
Package Overview ....................................................................... 4
Installation
Product Overview ......................................................................... 5
Start Your Installation.................................................................... 7
User Controls
Front Bezel Controls ..................................................................... 10
How to Use the OSD Menus ........................................................ 12
On-Screen Display Menus........................................................... 13
Appendices
Troubleshooting ............................................................................ 16
Product Dimensions ..................................................................... 17
Compatibility Modes ..................................................................... 18
Pivot Function (Optional) .............................................................. 19
Table of Contents
2
English
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recom-
mended in this user’s manual to maximize the life of your unit.
Do:
qTurnofftheproductbeforecleaning.
qUse only a dry soft cloth or clean room wiper when cleaning the
LCDpanelsurface.
qUse a soft cloth moistened with mild detergent to clean the
display housing.
qUseonlyhigh quality andsafetyapprovedAC/DCpower
adapter.
qDisconnect the power plug from AC outlet if the product is not
used for a long period of time.
Don’t:
qDo not touch the LCD panel surface with sharp or hard objects.
qDo not use abrasive cleaners, waxes or solvents for your
cleaning.
qDo not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
English
3
Introduction
AbouttheProduct
Having a 15.1” inch flat panel screen with an active, thin-film
transistor (TFT) liquid crystal display (LCD) , this product also demon-
strates following outstanding features.
qDirect analog RGB input
q15.1” diagonal screen size
q16.7 million displayable colors
q1024 x 768 resolution
qXGA/ SVGA/ VGA/ VESA/ Mac/ NEC PC-98 compatible
q24~60kHz horizontal scan
q56~75Hzhighrefreshrate
qAuto adjustment capability
qHigh quality full screen re-scaling
qMultilingual OSD menus in five languages: English, French,
German,Spanish,and Italian
qUSB hub with 1 upstream and 4 downstream ports on the
stand base
qVESA DDC 1/2B data communication
qVESA DPMS power saving
qStand with tilt and swivel functions
-Cablemanagementdevice
qPivot function: landscape and portrait display mode (optional,
needpivotsoftware)
4
English
Package Overview
LCDDisplay
VGA Signal Cable
USBUpstream Cable
Installation Diskette
(forDDC1/2B) Pivot®Software
(optional) NECPC-98
Adapter(optional)
PowerAdapter
PowerCord
User’sManual WarrantyCard
MacMutliform
Adapter(optional)
English
5
Power
Installation
Product Overview
uMain Unit
uRear View
LCD Display
Stand UserControls
CableManagement
Device
6
English
uConnection Ports
Display Rear Connectors
Display Stand Back USB Hub Ports
USB Upstream Port
4 USB Downstream
Ports
Display Input-B
DC Power-In
Display Input-A
English
7
StartYourInstallation
Notice: To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1024 x 768 resolution and make sure timing
of the display mode is compatible with the LCD display. We have
listed the “Compatibility Modes” of this LCD display in appendices
for your reference.
* For Macintosh, use the Mac adapter.
VGA Cable
Power Adapter
Power Cord
Mac Adapter *
uConnecting the Display
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is off.
2. Connect the VGA signal cable from display input-A or display input-B
connector to the 15-pin connector of your host computer and tighten the
screws.
3. Connect the power adapter to the power connector; plug one end of the
power cord into the power adapter, and then the other end into an electri-
cal outlet.
8
English
uUSB Hub Port Descriptions
USB Downstream Ports
These four USB ports are available for connecting USB type peripheral
devices such as keyboard, mouse, printer and so on.
USB Upstream Port
This Port is for connecting the USB Upstream cable to computer’s or
other hub’s USB port.
English
9
uCable Management
1. Route the cables through the cable management device.
2. Connect the cables to their respective connectors on the back panel of
the display.
CableManagement
Device
10
English
User Controls
FrontBezel Controls
No./ Icon Control Function
MENU Menu button To pop up the OSD menus.
SELECT/AUTO Select/Auto
Select
- To select the adjust-
ment items from OSD menus.
Auto
- To activate the “Auto
Adjustment” function to obtain
an optimum image.
3Brightness Minus/Minus 1.Decreases the brightness of
the display image.
2. Decreases value of the
adjustment items.
4Brightness Plus/Plus 1.Increases the brightness of
the display image.
2. Increases value of the
adjustment items.
Inhaltsverzeichnis
Andere CTX Monitor Handbücher
CTX
CTX VL950 Bedienungsanleitung
CTX
CTX 1565D Bedienungsanleitung
CTX
CTX EX1300 Bedienungsanleitung
CTX
CTX VL400 Bedienungsanleitung
CTX
CTX PR700 Bedienungsanleitung
CTX
CTX EX-710F Bedienungsanleitung
CTX
CTX p772L Bedienungsanleitung
CTX
CTX PR500 Bedienungsanleitung
CTX
CTX PR700 Bedienungsanleitung
CTX
CTX X70 Bedienungsanleitung
CTX
CTX PV510 Bedienungsanleitung
CTX
CTX PV720 Bedienungsanleitung
CTX
CTX VL700 Bedienungsanleitung
CTX
CTX S720G Bedienungsanleitung
CTX
CTX PV722E Bedienungsanleitung
CTX
CTX VL700 Bedienungsanleitung
CTX
CTX VL510 Bedienungsanleitung
CTX
CTX VL500 Bedienungsanleitung
CTX
CTX EX1200 Bedienungsanleitung
CTX
CTX S500B Bedienungsanleitung
