Cub Cadet SW-15CC Bedienungsanleitung
L-1788-CC-B
OWNER'S MANUAL
SWEEPER MODEL:
SW-15CC
Assembly
Installation
Operation
Repair Parts
For use with Lawn/Garden Tractors
LAWN SWEEPER
PATENT NO. US 6,640,532 B1
Important:This manual contains information for the safety of
persons and property. Read it carefully before assembly and
operation of the equipment!
L-1788-CC-B
2.
________________
________________
________________
CONGRATULATIONS on your the purchase pf your new Brinly-Hardy
Lawn Sweeper! Your lawn sweeper is designed, engineered and
manufactured to give you the best possible dependability and
performance.
CUSTOMER RESPONSIBILITIES
Please read and retain this manual. The instructions enables you to
assemble and maintain your lawn roller properly. And please, always
observe the "Safety" instructions.
TABLE OF CONTENTS
SAFETY ............ ..............................................................2-3
PARTS REFERENCE ......................................................4
PARTS LIST......................................................................5
ASSEMBLY ......................................................................6-11
OPERATION.....................................................................11-13
SERVICE..........................................................................14
PRODUCT IDENTIFICATION
PRODUCT COMPATIBLIITY
This lawn sweeper is designed for use with lawn tractors and lawn and
garden tractors.
RECORD PURCHASE INFORMATION
Record your purchase information in the spaces provided below.
DATE OF PURCHASE:
COMPANY NAME:
COMPANY PHONE:
SERIAL NUMBER:
SAFETY LABELS
UNDERSTANDING THE MACHINE SAFETY LABELS
The machine safety labels shown in this section are placed in important areas
on your machine to draw attention to potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and
CAUTION are used with this safety-alert symbol. DANGER identifies the most
serious hazards.
The operator's manual also explains any potential safety hazards whenever
necessary in special safety messages that are identified with the word,
CAUTION, and the safety-alert symbol.
________________
Safety-Alert Symbol
L-1788-CC-B 3.
TO HELP PREVENT BODILY INJURY DUE TO LOSS OF
STABILITY OR CONTROL.
Do not exceed maximum towing capacity of towing vehicle
listed in the vehicle operator's manual.
Do not exceed 5 mph.
Do not tow this machine behind a motor vehicle such as a
car, truck or ATV.
Do not tow this machine behind a ZTR (Zero Turn Radius)
Mower.
SAFETY
Read the general safety operating precautions in your
towing vehicle operator's manual for additional safety
information.
Operate Safely
Use this machine for intended purpose only.
This machine is intended for use in lawn care and home
applications. Do not tow behind a vehicle on a highway or in
any high speed applications. Do not tow at speeds higher
than maximum recommended towing speed.
Towing speed should always be slow enough to maintain
control. Travel slowly over rough ground.
Do not let children or an untrained person operate machine.
Do not let anyone, especially children, ride on this machine
or the towing vehicle. Riders are subject to injury such as
being struck by foreign objects and being thrown off. Riders
may also obstruct the operator's view, resulting in this
machine being operated in an unsafe manner.
Check towing vehicle brake action before you operate.
Adjust or service brakes as necessary.
Keep all parts in good condition and properly installed. Fix
damaged parts immediately. Replace worn or broken parts.
Replace all worn or damaged safety and instruction decals.
Do not modify the machine or safety devices. Unauthorized
modifications to the towing vehicle or machine may impair its
function and safety, and void the warranty.
Keep all nuts, bolts and screws tight.
TOWING SAFELY
Stopping distance increases with speed and weight of
towed load. Travel slowly and allow extra time and distance
to stop.
Total towed weight must not exceed limits specified in
towing vehicle operator's manual.
Excessive towed load can cause loss of traction and loss of
control on slopes. Reduce towed weight when operating on
slopes.
Never allow children or others in or on towed equipment.
Use only approved hitches. Tow only with a machine that
has a hitch designed for towing. Do not attach this machine
except at the approved hitch point.
Follow the manufacturer's recommendations for weight
limits for towed equipment and towing on slopes. Use
counterweights or wheel weights as described in the towing
vehicle operator's manual.
Do not turn sharply. Use additional caution when turning or
operating under adverse surface conditions. Use care
when reversing. To avoid jack-knifing, do not allow towing
vehicle wheels to contact drawbar.
Do not shift to neutral and coast downhill.
Protect Bystanders
Keep bystanders away when you operate this machine
Before you back look carefully behind for bystanders.
Before you operate any feature of this machine, observe
your surroundings and look for bystanders.
Keep Riders Off Towed Attachment
Keep riders off towed attachment.
Riders on a towed attachment are subject to injury, such as
being struck by objects and being thrown off the attachment
during sudden starts, stops and turns.
Riders obstruct the operator's view, resulting in the
attachment being used in an unsafe manner.
Keep riders off of hitch bracket.
Keep Body Parts From Under Drawbar
Before you disconnect this machine from towing vehicle
hitch plate:
• Stop on level ground.
• Stop towing vehicle engine.
• Lock towing vehicle park brake.
• Block wheels of the machine.
• Make sure body parts are not under drawbar.
L-1788-CC-B
4.
PARTS REFERENCE
Tools Required for Assembly:
1/2” Wrench (2)
9/16” Wrench (2)
Pliers
Safety Glasses
Gloves
64
31
32 32
36
38
44
48
49
14
16
16
16
22 26
62
62
32
30
17
10
19
61
11
18
65
63
40
39
43
35
37
40
42
9
3
9
2
7
9
4
5
8
9
1
34
12
6
2125
26
13
59
23
15
28
29
27
24
20
L-1788-CC-B 5.
53
53
56
56
52
52
9
51
57
33
45
58
58
47
55 50
46
54
REF. NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
61
62
63
64
65
PART NO.
R-2251-10
R-2254-10
R-2270-10
B-7063
B-7009
11M0808P
2M1012P
B-1673P
B-4786
R-2415-10
R-2288
R-2289
R-2293-1
R-2416
R-2321
F-577
R-2205
50M0624P
R-2281
R-2259
R-2261
R-2262
R-2263
R-2279-LH
R-2279-RH
B-4768
R-2265-CC
R-2280
R-2293-2
R-2306-01
R-2413-10
45M1111P
B-4107
R-2296-10
R-2290-10
B-3805
2M1024P
2M1028P
30M1000P
40M1000P
B-3861
D-146P
R-1882
B-3307-S
2M1040P
30M1200P
B-1675P
B-983
R-2303
R-2304
R-618
R-1806-10
R-2194-10
R-2195
R-2426
R-2300-10
R-2301-10
R-2307
R-2320
R-2257
11M1024P
2M1036P
R-2463
L-1744-4
DESCRIPTION
Hitch Clevis Assembly
Tow Tube
Lift Handle
Caution Label
Logo Decal
Carriage Bolt, ¼" x ½"
Hex Bolt, 5/16" x ¾"
Hex Lock Nut, ¼"
Nylon Insert Lock Nut, 5/16"
Lower Pivot Assembly
Bearing Assembly
Bearing Retainer
Inner Dust Shield
Lift Link
Self-Taping Screw #12x3/8"
"E" Ring, 5/8"
Brush Section
Cotter Pin, 3/16" x 1-1/2"
Brush Holder
Brush Axle
Dowel Pin
Washer, 5/8" I.D. x 1-3/8
Washer, 5/8" I.D. x 7/8"
Drive Pinion, Left Hand
Drive Pinion, Right Hand
5/8" Machinery Bushing
Wheel, 12" x 3" Bar Trd.
Drive Gear, 60 Tooth
Outer Gear Cover
Wheel Axle
Brush Housing Assembly
5/16" Flat Washer
Vinyl Cap, 1" dia.
Hamper Stop Assembly
Upper Frame Assembly
Spring
Hex Bolt, 5/16" x 1-1/2"
Hex Bolt, 5/16" x 1-3/4"
Hex Nut, 5/16"
Lock Washer, 5/16"
Hitch Pin, ½" dia.
Hairpin Cotter, Large
Flat Grip
Lock Pin
Hex Bolt, 5/16" x 2-1/2"
Hex Nut, 3/8"
Lock Nut, 3/8"
Hairpin Cotter, Small
Clevis Pin, 5/16" x 1-3/8"
Hamper Pull Rope
Special Washer, 5/16"
Lower Tube
Rear Tube
Hamper Stop Rod
Hamper/Wind Screen
Hamper Side Tube, Upper
Hamper Mount Tube
Hamper Spring Rod
External Retaining Ring, 5/8"
Set Screw, 1/4"
Carriage Bolt,5/16"x 1-1/2"
Hex Bolt, 5/16" x 2-1/4"
Adjustment Label
Serial Number Label
QTY
1
2
1
1
1
6
4
6
9
1
2
2
2
1
4
6
6
4
4
1
2
2
2
1
1
4
2
2
2
2
1
3
2
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
1
4
2
2
1
1
2
2
2
2
2
4
2
1
1
PARTS LIST
L-1788-CC-B
6.
Step 1.
9
5/16" Nylon Lock Nut
Qty. 4
9
62
5/16" x 1-1/2", Carriage Bolt
Qty. 4
62
14
35
31
a) Attach Upper Frame Assembly(35) to
Brush Housing Assembly(31).
b) Assemble Lift Link(14) as shown.
Step 2
44
Lock Pin
Qty. 1
39
5/16" Hex Nut
Qty. 1
40
5/16" Lock Washer
Qty. 1
44
39
40
3
a) Preassemble the Lock Pin(44) to
the Lift Handle(3).
L-1788-CC-B 7.
Step 3
9
5/16" Nylon Lock Nut
Qty. 2
37
5/16" x 1-1/2", Hex Bolt
Qty. 2
9
37
37
43
3
35
2
a) Install the Flat Grip (43) to the Lift
Handle (3).
b) Install the Tow Tubes (2) to the
Upper Frame Assembly (35).
Step 2a
9
5/16" Nylon Lock Nut
Qty. 1
38
5/16" x 1-3/4", Hex Bolt
Qty. 1
32
5/16" Flat Washer
Qty. 2
36
Spring
Qty. 1
38
36
9
32
32
10
3
a) Assemble Lift Handle(3) to Lift Link(14).
b) Install hex bolts (38) as shown. Add
washer (32) and install handle in middle
hole. NOTE: It may be necessary to put
downward pressure on the Lower Pivot
assembly (10) to line up the holes.
c) Complete the assembly by adding
the spring, washer and locknut.
14
L-1788-CC-B
8.
Step 4. ATTACHING CLEVIS
63 9
2
42
41
63
5/16" x 2-1/4", Hex Bolt
Qty. 2
9
5/16" Nylon Lock Nut
Qty. 2
41
Hairpin Cotter, 1/8”
Qty. 1
Attach the Hitch Clevis
Assembly(1) to the Tow Tubes
(2), as shown.
a) Install Hex Bolts (63)
through Tow Tubes (2) and
Hitch Clevis Assembly (1), as
shown
b) Install Lock Nuts (9) to Hex
Bolts. Tighten loosely.
1
L-1788-CC-B 9.
10"
9"
8"
7"
6"
11"
T O P EDGE OF PAGE
BOT T O M ED G E T O GR O U N D
Manual
Hitch Clevis Assembly
10"
9"
8"
7"
6"
11"
TOPEDGEOF PAGE
2
PATENT NO. US 6,640,532 B1
Step 5.
NOTE: Step 4 is for attaching the Hitch Clevis Assembly
(1) to the TowTubes(2), When complete, the tow tubes(2)
will be approximately level with the pavement:
a) Using this page, set the manual on the floor and
measure your hitch height as shown in illustration.
b) Position the Hitch Clevis Assembly between the tow
tubes for the proper height.
c) Attach the Hitch Clevis Assembly to the tow tubes as
shown in Step 4.
d) Attach the sweeper to the tractor.
e) Adjust the lift handle (3) to position the sweeper
brushes to sweep at the same hieght as the mower
blades.
f) Recheck the Tow Tube for level. The tubes should be
level or slightly higher at sweeper. Readjust clevis if
necessary.
g) When the proper Hitch Clevis level is achieved, securely
tighten the Lock Nuts (9) installed in Step 4.
3
L-1788-CC-B
10.
Step 6.
Step 7.
46
53
53
52
52
54
46
56
56
55
46
3/8" Hex Nut
Qty. 2
a) Install hex nuts to hamper
stop rod(54).
b) Assemble rear tube(53)
with holes up to lower
tube(52).
c) Install hamper stop
rod(54) to lower tube(52).
a) Lower the assembly in
Step 6 into the bottom of
hamper(55).
b) Assemble the rear tube(53)
with the holes down as shown.
c) Assemble the side
tubes(56) into the rear tube (53)
and into the hamper stop rod (54)
54
Inhaltsverzeichnis
Andere Cub Cadet Rasenkehrmaschine Handbücher
Beliebte Rasenkehrmaschine Handbücher anderer Marken
Agri-Fab
Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Bedienungsanleitung
Nordic
Nordic WS-L0118 Bedienungsanleitung
Smithco
Smithco 72-000-A Bedienungsanleitung
Parker
Parker Suburbanite 895803 Bedienungsanleitung
Agri-Fab
Agri-Fab 45-0290 Bedienungsanleitung
Agri-Fab
Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Bedienungsanleitung