Cuisinart SmartStick CSB-100 Service-Handbuch

INSTRUCTION AND

RECIPE BOOKLET

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

SmartStick®700-Watt Hand Blender CSB-100

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should

always be followed, including the following:

1. READ ALL INSTRUCTIONS.

2. Unplug from outlet when not in use, before putting on or

taking off parts and before cleaning. To unplug, grasp plug

and pull from electrical outlet. Never pull cord.

3. To protect against electrical shock, do not put the motor body,

cord or electrical plug of this hand blender in water or other

liquids. Only the detachable blending shaft and other certain

parts of this appliance have been designed for immersion into

water or other liquids. Never submerge any other portion of this

unit. If hand blender falls into liquid, immediately unplug it.

Carefully remove the blending shaft, clean and dry unit thoroughly

before continuing.

4. This appliance should not be used by children and care should

be taken when used near children.

5. Avoid contact with moving parts.

6. During operation keep hands, hair and clothing, as well as

spatulas and other utensils, away from attachments and any

mixing container to reduce risk of injury to persons and/or

damage to the appliance. A spatula may be used, but must be

used only when the unit is not operating.

7. Do not operate any appliance with a damaged cord or plug,

or after the appliance has malfunctioned or has been dropped

or damaged in any way or is not operating properly. Return the

appliance to the nearest Cuisinart Repair Center for examination,

repair or mechanical or electrical adjustment.

8. Remove detachable shaft from the blender before washing the

blades or shaft.

9. Blades are SHARP. Handle carefully when removing,

inserting or cleaning. Exercise the same care when

removing, inserting the cutting blade for the chopper/grinder

attachment.

10. When mixing liquids, especially hot liquids, use a tall container

or make small quantities at a time to reduce spillage, splattering

and possibility of injury from burning.

11. To reduce the risk of injury, never place chopper/grinder

attachment cutting blade on base without first putting work bowl

properly in place.

12. Be certain the chopper/grinder attachment cover is securely

locked in place before operating appliance. Do not attempt to

remove cover until blade has stopped rotating.

13. Check work bowl for presence of foreign objects before using.

14. The use of attachments or accessories not recommended by

Cuisinart may cause fire, electrical shock, or risk of injury.

15. Do not use outdoors or for purposes other than intended use.

16. Do not let any cord hang over the edge of the table or counter.

Do not let cord contact hot surfaces, including stovetop.

17. Make sure the appliance is off, the motor has stopped

completely and the appliance is unplugged from outlet before

putting on or taking off attachments, and before cleaning.

18. Maximum rating is based on the optional CSB-100BFC baby

food chopper attachment that draws the greatest power. And

that other recommended attachments may draw significantly

less power.

19.

Do not operate your appliance in an appliance garage or

under a wall cabinet. When storing in an appliance garage

always unplug the unit from the electrical outlet. Not doing

so could create a risk of fire, especially if the appliance

touches the walls of the garage or the door touches the unit

as it closes.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

NOTICE

This appliance has a polarized plug (one blade is wider than the

other). As a safety feature, this plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician. Do not attempt

to defeat this safety feature.

CONTENTS

Important Safeguards ....................................2

Unpacking Instructions ...................................4

Introduction ............................................4

Features and Components ................................5

Assembly..............................................6

Blending Attachment................................6

Chopper/Grinder Attachment .........................6

Reversible Blade ...................................6

Whisk Attachment ..................................7

Potato Masher Attachment ..........................7

Operation..............................................8

Blending..........................................8

Pulse ............................................8

Chopping/Grinding .................................8

Whisking .........................................9

Mashing Potatoes ..................................9

Cleaning and Maintenance ................................9

Tips and Hints .........................................10

Frequent Uses for Chopper and Grinder ....................13

Recipes ..............................................14

Warranty .............................................32

UNPACKING INSTRUCTIONS

Place the package containing the Cuisinart

Smart Stick

Variable

Speed Hand Blender on a sturdy surface. Unpack the components from

the box by removing the upper protective insert. Gently slide the unit

from the box. Remove all support materials from the box and replace

the upper insert. Save packaging for possible repacking of the unit.

NOTE: The blending and chopper/grinder blades are extremely

sharp.

Before using the Cuisinart®Smart Stick®Variable Speed Hand Blender

for the first time, we recommend that you wipe the unit with a clean,

damp cloth to remove any dirt or dust. Dry it thoroughly with a soft

absorbent cloth. To clean all parts see instructions on page 9 and 10.

Read all instructions completely for detailed operating procedures.

INTRODUCTION

Get ready to experience a whole new level of blender versatility. Your

SmartStick® 700-Watt Hand Blender is a Potato Masher, too. A unique new

attachment slips onto the power handle so you don’t have to pull out your

hand or stand mixer to make perfect mashed potatoes – in only takes sec-

onds! This very powerful hand blender is also supremely multifunctional, with

a chopper/grinder and chef’s whisk that attach to the 700-watt motor body

housing. Take a look at our recipes to find out even more you can do with this

SmartStick!

FEATURES AND

COMPONENTS

1. Variable Speed Control Dial

Allows you to select speed and

gradually adjust during blending if

desired.

2. Lock/Unlock Button

Must be pressed to unlock before

power handle will operate.

3. On/Off Power Button:

Allows you to activate the hand

blender at the touch of a button

after unlocking. Simply unlock, then

press and hold down to blend or

pulse. Once the button is released,

blending will stop.

4. Comfort Grip Handle:

The handle allows you to control the

hand blender with ease.

5. Motor Body Housing:

Houses the powerful 700-watt motor.

6. Blending Attachment:

This attachment easily snaps into

the motor body housing. The fixed

stainless blade is partially covered

by a stainless housing steel blade

guard that keeps splashing to a

minimum. Press the release button

on the back of the unit to detach for

easy cleaning.

7. Potato Masher:

Attaches to motor housing to mash

potatoes in bowl or pot.

8. Whisk Attachment:

Whisk attachment snaps into the

motor body housing; this attachment

is great for whipping cream, egg

whites and other delectable treats.

9. Chopper/Grinder Attachment with

Reversible Blade:

Attaches to motor housing to chop,

mince and grind.

10. Mixing/Measuring Beaker:

4-cup blending cup beaker is dishwasher safe.

Use this container it to blend drinks, shakes,

salad dressings and more. Designed for easy

gripping and drip-free pouring.

1. 2.

10.

ASSEMBLY

BLENDING ATTACHMENT

1. Align the motor body housing with the blending

shaft and push the pieces together until you

hear and feel them click. It may be helpful to

press the release button when assembling.

2. Plug the motor housing into a electrical outlet.

CHOPPER/GRINDER ATTACHMENT

(WITH REVERSIBLE BLADE)

1. Place the chopping/grinding blade into center of

the work bowl over metal blade shaft

(See REVERSIBLE BLADE, following).

2. Place cover on top of the work bowl. Align notches

on cover and bowl, and turn clockwise to lock into

place.

3. When ready to process food, press power handle

onto cover.

Assemble the parts.

1. Place the chopping cup on a flat, dry, stable surface.

The metal blade assembly shaft (A) is attached to the

bottom of the chopping cup. If not already in

place, slide the fully assembled blade assembly

(B) over the top of the metal blade assembly shaft.

2a. Put together the blade assembly if not

assembled: Very carefully connect the blade

ring (C) to the plastic blade sheath (D). Line up

the blade ring opening with the plastic sheath.

There are notches (E) on opposite sides of the interior of the

hub. These fit over ridges on the sides of the plastic blade

sheath (G). Let the blade ring slide to the

bottom of the plastic sheath. HOLD THE

BLADE RING BY THE CENTRAL HUB

HOLDING RIBS (grips) (F) ONLY. DO NOT

TOUCH THE RAZOR-SHARP BLADES.

Pick up the blade ring by its hub holding

ribs (grips) and turn it very slightly

clockwise. This locks it in place on the plastic blade sheath and

prevents it from sliding up during processing. Note these

important features of the blade ring. The blade ring can be

placed over the plastic blade sheath in two different ways: If you

hold it this way (A), you will see the word “Sharp” on the blade.

Assemble the blade this side up to use the sharp edge. If you

hold it this way (B), you will see no writing on the blade.

Assemble the blade this side up to use the blunt edge.

B. BLUNT SIDE UP

SHARP SIDE

WHISK ATTACHMENT

Align the motor body housing with the assembled whisk

attachment and push the gearbox and motor housing

together until you hear and feel them click. It may be

helpful to press the release button when assembling.

Note: Whisk and whisk gearbox are detachable from one

another.

POTATO MASHER ATTACHMENT

Your potato masher attachment comes fully assembled.

1. Align the gear box at the end of the potato masher

with the motor body housing and push gearbox and

housing together until you hear and feel them click.

2. Plug the motor housing into an electrical outlet.

NOTE: Gearbox detaches from potato masher shaft

for cleaning and storage

To reassemble potato masher after cleaning

(see Cleaning Potato Masher Attachment, pg.10)

1. Align the triangle mark on the gear box with the

unlock symbol on the potato masher shaft.

2. Rotate the gear box clockwise until you hear it click

and lock into place on the shaft.

3. Place blade onto hub at the wide end of shaft,

push down, and twist counterclockwise to secure.

NOTE: blade cannot be put on or taken off unless

gear box is firmly attached to the shaft.

OPERATION

BLENDING

The specially designed blade is for mixing and puréeing all kinds of

foods, including salad dressings, powdered drink products, soups and

sauces and blended drinks like milkshakes or smoothies.

This blade mixes and stirs while adding only a minimum of air to your

mixture. A gentle up-and-down motion is all you need to make the

most flavorful, full-bodied recipes. Be careful never to remove the

blending shaft from the liquid while in operation, for it will splatter.

Tilt the pan or bowl away from you if needed to ensure the protective

blade guard on the blending shaft is fully submerged.

1. Plug in motor housing.

2. Put blending shaft into mixture to be blended.

Select Speed. Press and hold the Lock/Unlock button on top of the

motor housing and press the power button to turn motor on. Once

motor is on, you can release the Lock/Unlock button but continue to

hold in the power button. You can also press the power button first,

holding it down as you press the Lock/Unlock button to turn motor

on. Speed can be gradually adjusted at any time during blending.

Do not hold power button down for more than 60 seconds at a time.

4. To turn the blender motor off, release the power button.

5. Unplug immediately after use.

CAUTION: DO NOT PUT FINGERS NEAR BLADE. TO DISLODGE

FOOD, UNPLUG HAND BLENDER FROM THE OUTLET FIRST.

PULSE

To Pulse, press and hold the Lock/Unlock button while pressing and

releasing the power button as desired.

CHOPPING AND GRINDING

Do not operate the chopper/grinder attachment without food in the

work bowl.

1. Put the work bowl on a flat, sturdy surface like a countertop.

2. Be sure the blade is assembled to use the edge that is appropriate

for the food to be processed, then place over metal blade shaft in

work bowl.

3. Put food into the work bowl. Food should be cut into small even

pieces, and the bowl not overloaded.

4. Put the chopper/grinder cover on top of the prep bowl, making

sure the cover is properly seated.

5. Place motor housing over the center gear hub in the work bowl

cover and push down to lock into place.

6. Plug unit in.

7. Select Speed, unlock, then press on the power button. Note: Due

to the powerful motor provided with this unit, Cuisinart

recommends using one hand to support the work bowl during

operation.

8. WHEN THE BLADE STOPS MOVING, unplug the unit, remove the

motor body from the chopper/grinder cover, and remove the

cover.

9. Carefully remove the chopping blade, holding it by the gripping

ridges on the plastic sheath. NEVER TOUCH THE BLADE

ITSELF.

10. Remove food with a spatula.

WHISKING

1. Insert the whisk attachment into the motor body. (See Assembly

for Whisk Attachment, page 7.)

2. Plug electrical cord into a wall socket.

3. Put the whisk into mixture to be blended.

4. Select Speed, unlock and press power button. The hand blender

will continue to run as long as the power button is pressed in.

To turn off, release the power button and the motor will stop.

MASHING POTATOES

1. Be sure potato masher is securely assembled.

2. Put potatoes or other food to be mashed in large bowl or pot.

3. Plug in unit and place head of potato masher into food.

4. Unlock and push power switch to turn masher on.

5. Slightly raise and lower masher as you move it through food until it

reaches texture you want.

6. Release power button to turn off masher before you lift it away

from the food.

7. Unplug unit.

CLEANING AND MAINTENANCE

HAND BLENDER

Always clean the motor body and blending shaft thoroughly after

using. Remove the blending shaft from the motor body. Clean the

motor body only with a sponge or damp cloth. Do not use abrasive

cleaners that could scratch the surface. To clean the blending shaft,

wash by hand in hot water using mild detergent or on top shelf of

dishwasher. Be mindful of the fixed razor-sharp blade edges.

CHOPPER/GRINDER ATTACHMENT

To simplify cleaning, rinse the work bowl and blade and wipe the

underside of the cover immediately after use so food does not dry

on them. Do not submerge the work bowl cover in water or put in the

dishwasher. Wash blade and work bowl in warm, soapy water – avoid

leaving the blade submerged in water where it may disappear from

sight. Rinse and dry. Blade and work bowl can also be cleaned on

the top shelf of dishwasher. Unload the dishwasher carefully to avoid

contact with the sharp blade. Wipe the underside of the cover with

a sponge or damp cloth to remove any food. Wipe the power handle

and top of the cover with a damp sponge or cloth. Dry it immediately.

Never submerge the power handle or the chopper cover in water

or other liquids. The chopper/grinder attachment is intended for

HOUSEHOLD USE ONLY.

WHISK ATTACHMENT

To clean your whisk attachment, simply release the attachment

from the motor body housing. Once the whisk is removed, detach

the metal whisk from the gearbox by pulling the pieces apart.

To clean the gearbox, simply wipe with a damp cloth. To clean the

metal whisk, wash with warm soapy water or clean on top shelf of

the dishwasher. Do not submerge the gearbox in water or any other

liquid.

POTATO MASHER ATTACHMENT

Release the potato masher attachment from the housing body. To simplify

cleaning, rinse the potato masher attachment immediately after use so

food does not dry on it. Press the inner blade back into the unit and turn

clockwise to release inner blade. Wash with warm, soapy water and a soft

bristle brush if necessary, or clean on top rack of dishwasher. Do not use

any sharp, metal objects. Dry thoroughly. To reassemble, see the

assembly instructions on page 7.

Any other servicing should be performed by an authorized service

representative.

TIPS AND HINTS

FOR HAND BLENDER

• Be sure that the blending blade guard is fully submerged before

blending ingredients to prevent splatter.

• To purée a soup, use the hand blender to blend the soup ingredients

to the desired consistency, using a gentle up-and-down motion right

in the saucepan or pot.

• When blending ingredients right in a pot or pan tilt the pan away

from you to create a deeper area for blending to prevent splatter.

• When using a nonstick cooking surface, be careful not to scratch

the coating with the hand blender.

Andere Handbücher für SmartStick CSB-100

Inhaltsverzeichnis

Sprachen:

Andere Cuisinart Küchengerät Handbücher

Cuisinart

Cuisinart CSK-250 - GreenGourmet Nonstick Electric... Bedienungsanleitung

Cuisinart

Cuisinart SmartStick CSB-55 Bedienungsanleitung

Cuisinart

Cuisinart MP-150C Bedienungsanleitung

Cuisinart

Cuisinart FS-75 Series Bedienungsanleitung

Cuisinart

Cuisinart SPECIALTY Collection Service-Handbuch

Cuisinart

Cuisinart Elite Collection GR-150C Service-Handbuch

Cuisinart

Cuisinart Smart Stick CSB-76 Series Betriebshandbuch

Cuisinart

Cuisinart CPB-300XA Service-Handbuch

Cuisinart

Cuisinart EasyPop CPM-900BKA Service-Handbuch

Cuisinart

Cuisinart Precision Master SM-50BK Service-Handbuch

Cuisinart

Cuisinart 562775 Smart Stick Bedienungsanleitung

Cuisinart

Cuisinart IB-5239A Betriebshandbuch

Cuisinart

Cuisinart PVS-1000J Bedienungsanleitung

Cuisinart

Cuisinart JEX-450A Bedienungsanleitung

Cuisinart

Cuisinart Cook Central MSC-600 Bedienungsanleitung

Cuisinart

Cuisinart Outdoors CPO-401 Bedienungsanleitung

Cuisinart

Cuisinart Cook Central MSC-400 Bedienungsanleitung

Cuisinart

Cuisinart Pastafecto PM-1 Series Bedienungsanleitung

Cuisinart

Cuisinart CPC-900 Series Betriebshandbuch

Cuisinart

Cuisinart SP-2C Bedienungsanleitung

Cuisinart

Cuisinart The Fruit Scoop ICE-31 Bedienungsanleitung

Cuisinart

Cuisinart CJE-2000 Series Service-Handbuch

Cuisinart

Cuisinart CSS-100 Bedienungsanleitung

Cuisinart

Cuisinart Tazzaccino FR-10C Series Service-Handbuch

Beliebte Küchengerät Handbücher anderer Marken

Tayama

Tayama TYG-35AF Bedienungsanleitung

AEG

AEG 43172V-MN Bedienungsanleitung

REBER

REBER Professional 40 Benutzerhandbuch

North American

North American BB12482G / TR-F-04-B-NCT-1 Bedienungsanleitung

Presto

Presto fountain popper Bedienungsanleitung

Westmark

Westmark 1035 2260 Bedienungsanleitung

Zanussi

Zanussi ZCG64396XA Bedienungsanleitung

HOFFEN

HOFFEN SM-9302M Bedienungsanleitung

Philips

Philips HD3133 Bedienungsanleitung

Ronco

Ronco Beef Jerky Bedienungsanleitung

Hendi

Hendi 470411 Bedienungsanleitung

Livoo

Livoo MEN386 Bedienungsanleitung

croydon

croydon WR-10313-700 Bedienungsanleitung

Chefman

Chefman RJ43-SQ Series Bedienungsanleitung

Vacmaster

Vacmaster VP680 Bedienungsanleitung

Jetmaster

Jetmaster 900HG Bedienungsanleitung

Küppersbusch

Küppersbusch EEH 610.0 Kurzanleitung zur Einrichtung

HURAKAN

HURAKAN HKN-F10 Bedienungsanleitung