Custom Audio Electronics VT15 Bedienungsanleitung

Version 1.0 June 2013

VT15

Hardware System

User Manual

Manual Version 1.0

The information contained in this document is subject to change

without notice.

We make no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability

and fitness for a particular purpose. We shall not be liable for errors

contained herein or for incidental or consequential damages in

connection with the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by

photocopied, reproduced or translated to another language without

the prior written consent of the manufacturer.

TRADEMARK

Intel®, Pentium® and MMX are registered trademarks of Intel®

Corporation. Microsoft® and Windows® are registered trademarks of

Microsoft Corporation.

Other trademarks mentioned herein are the property of their

respective owners.

Safety

IMPORTANT SAFETY INSTRUCTIONS

1. To disconnect the machine from the electrical Power Supply, turn

off the power switch and remove the power cord plug from the wall

socket. The wall socket must be easily accessible and in close

proximity to the machine.

2. Read these instructions carefully. Save these instructions for future

reference.

3. Follow all warnings and instructions marked on the product.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are

provided for ventilation; to ensure reliable operation of the product

and to protect it from overheating. These openings must not be

blocked or covered. The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or heat

provided.

7. This product should be operated from the type of power indicated

on the marking label. If you are not sure of the type of power

available, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

9. Never push objects of any kind into this product through cabinet

slots as they may touch dangerous voltage points or short out parts

that could result in a fire or electric shock. Never spill liquid of any

kind on the product.

CE MARK

This device complies with the requirements of the EEC directive

2004/108/EC with regard to “Electromagnetic compatibility” and

2006/95/EC “Low Voltage Directive”

FCC

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation

iii

CAUTION ON LITHIUM BATTERIES

There is a danger of explosion if the battery is replaced incorrectly.

Replace only with the same or equivalent type recommended by the

manufacturer. Discard used batteries according to the manufacturer’s

instructions.

Battery Caution

Risk of explosion if battery is replaced by an incorrectly type.

Dispose of used battery according to the local disposal instructions.

Safety Caution

Note: To comply with IEC60950-1 Clause 2.5 (limited power sources,

L.P.S) related legislation, peripherals shall be 4.7.3.2 "Materials for fire

enclosure" compliant.

4.7.3.2 Materials for fire enclosures

For MOVABLE EQUIPMENT having a total mass not exceeding

18kg.the material of a FIRE ENCLOSURE, in the thinnest significant

wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass

the test of Clause A.2.

For MOVABLE EQUIPMENT having a total mass exceeding 18kg

and for all STATIONARY EQUIPMENT, the material of a FIRE

ENCLOSURE, in the thinnest significant wall thickness used, shall

be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1

LEGISLATION AND WEEE SYMBOL

2012/19/EU Waste Electrical and Electronic Equipment Directive on the

treatment, collection, recycling and disposal of electric and electronic

devices and their components.

The crossed dustbin symbol on the device means that it should not be

disposed of with other household wastes at the end of its working life.

Instead, the device should be taken to the waste collection centers for

activation of the treatment, collection, recycling and disposal

procedure.

To prevent possible harm to the environment or human health from

uncontrolled waste disposal, please separate this from other types of

wastes and recycle it responsibly to promote the sustainable reuse of

material resources.

Household users should contact either the retailer where they

purchased this product, or their local government office, for details of

where and how they can take this item for environmentally safe

recycling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract.

This product should not be mixed with other commercial wastes for

disposal.

Revision History

Revision Date Description

V1.0 June, 2013 Release

Table of Contents

1 Item Checklist................................................1

1-1 Standard Items............................................................................... 1

1-2 Optional Items ................................................................................ 2

2 System View...................................................3

2-1 Front View ....................................................................................... 3

2-2 Rear View........................................................................................ 4

2-3 Bottom View.................................................................................... 5

2-4 I/O View........................................................................................... 6

3 Peripherals Installation.................................7

3-1 MSR Installation............................................................................. 7

3-2 VFD Installation .............................................................................. 8

3-3 Second Display Installation .........................................................10

3-4 Cash Drawer Installation..............................................................12

3-5 Wall Mount Kit..............................................................................14

4 System Assembly & Disassembly.............. 15

4-1 Replace the HDD..........................................................................15

4-2 Replace the Power Adapter .........................................................16

4-3 Remove the System Stand ..........................................................16

5 Specification ................................................17

6 Jumper Settings.......................................... 19

6-1 C56 Motherboard Layout.............................................................19

6-2 Connectors & Functions ..............................................................20

6-3 Jumper Settings ...........................................................................21

7 Appendix: Driver Installation ..................... 25

1 Item Checklist

1-1 Standard Items

a. System b. Power adapter (65W)

c. Power cable d. COM-RJ45 cable (x2)

e. Driver CD

1-2 Optional Items

a. MSR module b. SSD card module

c. VFD module d. Second display

e. Wall mount kit

2 System View

2-1 Front View

Number Description

1 Touch screen

2 MSR module (Option)

3 Power button

②

①

③

Inhaltsverzeichnis

Andere Custom Audio Electronics Touch-Terminal Handbücher

Custom Audio Electronics

Custom Audio Electronics SILK Android Beilage

Custom Audio Electronics

Custom Audio Electronics HT15 Bedienungsanleitung

Custom Audio Electronics

Custom Audio Electronics PT-3000 Bedienungsanleitung

Custom Audio Electronics

Custom Audio Electronics TWENTYFIVE Beilage

Custom Audio Electronics

Custom Audio Electronics KR500-G Bedienungsanleitung

Custom Audio Electronics

Custom Audio Electronics Vision15 Pro Beilage

Custom Audio Electronics

Custom Audio Electronics QT15 Beilage

Custom Audio Electronics

Custom Audio Electronics PT-3000 Bedienungsanleitung

Custom Audio Electronics

Custom Audio Electronics qt10 Bedienungsanleitung

Custom Audio Electronics

Custom Audio Electronics Vision15 Turbo Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung