Cutting Edge Esri Data Appliance 5.1 Bedienungsanleitung

Overview

The purpose of the Quick Start Guide is to step you quickly and easily through the update

of a Data Appliance 5.1 collection. This Quick Start Guide is for use with ArcGIS

10.1 for

Server. The update consists of the following steps:

Step 1 Unpack the Components

Step 2 Delete ArcGIS Services

Step 3 Shut Down Data Appliance for ArcGIS

Step 4 Remove Old/Install New Data Collection

Step 5 Power On Data Appliance for ArcGIS

Step 6 Verify New Data Collection

Step 7 Create Shares

Step 8 Congure ArcGIS Server to Use Cache Directory

Step 9 Publish Services

Step 10 Use Services

Before Starting

ArcGIS Server 10 SP5 or higher is required for Data Appliance 5.1. If you are planning to

upgrade to ArcGIS 10.1 for Server, Esri recommends you do so prior to installing your new

collection. If you are using ArcGIS Server 10, please refer to the Quick Start Guide Data

Appliance for ArcGIS 10 Data Collection Update for Windows. Services for Data Appliance

for ArcGIS data collections installed on your Data Appliance for ArcGIS server will be

unavailable during the installation process. This update should take approximately two

hours to complete.

Note: If you are using locators and routing services from Data Appliance 5.0 for ArcGIS,

since locators and routing services are no longer included as part of the Data Appliance with

the 5.1 release, you need to migrate to StreetMap

™

Premium for ArcGIS for your regions of

interest prior to upgrading to Data Appliance 5.1 for ArcGIS. Additionally, if you were using

the World Places Locator from Data Appliance 5.0, you need to upgrade to the World Places

Locator that shipped with Data Appliance 5.1 on a separate DVD before upgrading to Data

Appliance 5.1 for ArcGIS.

Important: It is imperative that care and precautions be taken when handling the data

collection hard drives. The hard drives are sensitive to shock as well as electrostatic

discharge. Make sure precautions are taken to eliminate any built-up static. The use of a

grounding strap is highly recommended while handling the hard drives.

Your shipment contains one of the following Data Appliance for ArcGIS

collections: World Premier Collection, World Small-Scale Collection, North

America Collection, or Europe Collection; a collection consists of two or more

drives that make up a single RAID volume. Each drive is labeled with the

collection name and version.

To update the Data Appliance for ArcGIS collections, ArcGIS Services that

utilize the Data Appliance 5.0 services must be deleted from ArcGIS Server

before you disconnect the Data Appliance 5.0.

A. Log in to ArcGIS Server using the Data Appliance for ArcGIS data account

with administrative privileges.

B. Start ArcGIS Server Manager and log in using your account.

C. Click Services > Manage Services.

D. Check each service to select the services to stop.

E. Locate the service in the Services module and click Delete. The service is

deleted from your server.

Although Data Appliance for ArcGIS has hot-swappable hard drive bays, hot

swapping an entire data collection is not supported.

A. Log in to Data Appliance for ArcGIS using the Administrator account.

B. Click the Start menu, expand the Shutdown menu, and select Shut down.

C. Allow Data Appliance for ArcGIS to completely shut down.

Unpack the Components

Delete ArcGIS Services

132176 ESRI 11/12kq

Data Appliance 5.1 for ArcGIS®

Data Collection Update for Windows®

ArcGIS 10.1 for Server

Quick Start Guide

Basemap Collection Services World Imagery Collection Services World Collection Services

Map Services

World_Boundaries_and_Places

World_Street_Map

World_Topo_Map

World_Transportation

Geocode services

TA_Address_EU

TA_Address_NA_10

Routing Services

ESRI_Route_EU

ESRI_Route_NA

Map Services

World_Imagery

USA_Topo_Maps

Map Services

DeLorme_World_Base_Map

Ocean_Basemap

World_Boundaries_and_Places

World_Boundaries_and_Places_Alternate

World_Imagery

World_Navigation_Charts

World_Physical_Map

World_Shaded_Relief

World_Street_Map

World_Transportation

Globe Services

ESRI_Elevation_World

USGS_Elevation_US

Shut Down Data Appliance for ArcGIS

A. With Data Appliance for ArcGIS powered off, remove the existing data col-

lection hard drives from the Data Appliance for ArcGIS system.

B. Place the removed hard drives in a secure and static-free location.

C. Continue removing all hard drives for the collection to be updated. Do

not leave any hard drive from the old data collection in Data Appliance

for ArcGIS.

Depending on the conguration being serviced, use the above illustrations as guides, with

1U on the left and 4U on the right.

With Data Appliance for ArcGIS still powered off, install the new data

collection hard drives into Data Appliance for ArcGIS. Note that the

new hard drives are labeled as to what collection they belong to as

well as the number of drives in the set, for example, World Premier

Collection Drive 00 1 of 22.

Although it does not matter which slot a drive is installed in, it is recom-

mended that drives be installed in order, starting from the top left, lling in

the drive bays across a row, then proceeding to the row below.

D. Note the label of the hard drive that is to be installed into Data Appliance

for ArcGIS to nd its position. Make sure all drives from each set are pres-

ent. If you nd that a drive is missing, immediately stop the installation

procedure and contact Cutting Edge Networked Storage technical

support.

E. Insert the replacement drive tray into the chassis. Make sure to press the

drive carrier handle closed until it clicks in place.

F. Make sure all drives from all the data collections are installed in Data

Appliance for ArcGIS.

Remove Old/Install New Data Collection

To turn on Data Appliance for ArcGIS, press the power button located on the

front of the computer equipment rack.

Note: While booting up, the Windows 2008 Storage Server operating system

performs a number of system checks to verify the integrity of the le system.

During this time, the hard drive activity LEDs on Data Appliance for ArcGIS will

blink. Please do not interrupt the system by powering it off or rebooting it.

Power On Data Appliance for ArcGIS

Verify New Data Collection

Before utilizing the data collection, the health of the RAID arrays must be

veried. Data Appliance for ArcGIS ships with the LSI/3ware 3DM2 utility pre-

installed. This utility will be used to verify the status of the datasets.

A. Log in to Data Appliance for ArcGIS as Administrator.

B. Click the Start menu, expand All Programs, and expand the 3ware folder.

C. Click Connect to 3DM2 to start the 3DM2 utility.

D. Disregard the security warning and click Continue to website (not

recommended).

E. In the Login drop-down menu, select Administrator.

F. Enter the password “3ware” and click Login.

G. The 3DM2 summary screen is displayed. Note the Status column.

H. If the status for all collections is OK and green, the arrays are healthy and

ready to use. If something other than OK is displayed, click Information and

click Unit Information. This displays the status of each RAID array (unit).

1. If the status is Verifying, the datasets are ready to use. (Verify

procedures are run on schedules to preemptively correct any errors.)

2. If the status is Degraded or Ofine, immediately stop and contact

Cutting Edge Networked Storage technical support.

I. Click Logout to log out of the 3DM2 utility. Once you have logged out, exit

the web browser.

or registered marks of Esri in the United States, the European Community, or certain other jurisdictions. Other companies and products or

services mentioned herein may be trademarks, service marks, or registered marks of their respective mark owners.

Data Appliance for ArcGIS must be congured to share the data collections.

A. Log in to Data Appliance for ArcGIS as Administrator.

B. Click Start > Administrative Tools > Computer Management.

C. In the Computer Management application, click Shared Folders to expand

the tree and right-click the Shares folder. Select New Share.

D. In the Create A Shared Folder wizard, click Next to begin.

E. For Folder path, click Browse and navigate to the hard drive with the

data collection (usually drive E). Select the cache directory and click OK.

F. Click Next.

G. In the Name, Description, and Settings dialog box, enter the Share name

for cache or source documents and enter the Share path for the appropri-

ate directory.

H. Click Next.

I. Select the Customize Permissions option and click Custom.

J. In the Customize Permissions window, click Add.

K. Add the following users and groups if needed: Administrator and arcgis.

L. Make sure the permissions for the users and groups are set to Full

Control.

M. Repeat steps 7C through 7L for the source documents share.

Create Shares

Congure ArcGIS Server to Use Cache Directory

ArcGIS 10.1 for Server maintains a list of directories in which it can nd map and

globe cache tiles. You need to explicitly add the Data Appliance cache directory

to this list.

A. Log in to ArcGIS Server using the Data Appliance for ArcGIS data account

with administrative privileges.

B. Start ArcGIS Server Manager and log in using your ArcGIS for Server account.

C. Click the Site tab.

D. In the View menu on the left, click Directories.

E. Click Add Directory on the right below the Directories description.

F. Enter a Name, for example, Cache. From the Type drop-down list,

choose Cache.

G. For Location, enter the path to the cache folder on the ArcGIS Data

Appliance data collection you made when you created shares, for example,

\\ARCGISDATAAPP\cache.

H. You do not need to specify a Description, Cleaning Mode, or Maximum

File Age.

I. Click Add to add the directory.

Publish Services

The following instructions apply to map services. Information about globe ser-

vices can be found in the help le on the Data Appliance 5.1 for ArcGIS Help

Documentation DVD by opening arcgis_data_appliance.pdf.

Using ArcGIS Server Manager, you can publish a service denition le (.sd) as

a service. To publish a service denition using Manager, follow these steps for

each map service that you want to create:

A. Open ArcGIS Server Manager and log in.

B. Click Services > Manage Services > Publish Service.

C. Click the browse button to navigate to the source_documents > service_

denitions folder on the Data Appliance data collection, for example,

\\ARCGISDATAAPP\source_documents\service_denitions.

D. Select the service denition you want to publish, for example, Ocean_

Basemap.sd. See the Services Reference Guide for 5.1 at the end of this

document for a list of the Data Appliance map services.

Publish Services (continued)

E. Click Next.

F. By default, the service denition is published to the server folder specied in

the service denition conguration. You must publish the service denition

to this root folder.

G. Optionally, choose the GIS server cluster that will host the published

service denition. Click Next.

H. Optionally, choose to enable or disable capabilities for your

service denition.

I. Click Publish to publish the service denition as a service. The new map

service appears in the list of available services.

The publish process uses the rst directory in the server’s list of cache

directories. You need to change it to the data appliance cache directory

created previously.

J. Click the Stop button to the right of the service name to stop the service.

K. Click the Edit button to edit the service properties.

L. Click Caching and change the cache directory setting to reference the data

appliance collection.

Services Reference Guide for 5.1

Map Services Globe Services Geocode Services

DeLorme_World_Base_Map

NatGeo_World_Map¹

Ocean_Basemap

USA_Topo_Maps

World_Boundaries_and_Places

World_Boundaries_and_Places_Alternate

World_Imagery

World_Light_Gray_Base¹

World_Light_Gray_Reference¹

World_Physical_Map

World_Shaded_Relief

World_Street_Map

World_Topo_Map

World_Transportation

EESRI_Elevation_World

USGS_Elevation_US

ESRI_Places_World2

New Services—Refer to the Data Appliance 5.0 for ArcGIS Help Documentation DVD for more information.

Now available on a separate DVD included with Data Appliance 5.1 for ArcGIS.

Resources

Cutting Edge Networked Storage provides several reference documents. These are available

at cuttedge.com/contact/DAWindows.html.

The Data Appliance 5.1 for ArcGIS Help Documentation DVD is included in the box with your

data collection drives. Refer to the help for additional details.

For an up-to-date online help system, system requirements, information on licensing, and

more, visit links.esri.com/data-appliance/5.1/tech-docs.

Support

Esri Support

For information regarding the conguration and setup of ArcGIS services and usage, visit

support.esri.com/en/phoneSupport.

For the most current information for all ArcGIS products, visit the ArcGIS Resources website

at resources.arcgis.com.

Cutting Edge Networked Storage Support

For information and support regarding the Data Appliance for ArcGIS hardware, contact

Cutting Edge Networked Storage using the following contact options:

Phone: 800-257-1666

E-mail: [email protected]

Website: cuttedge.com/contact/technical_support.html

Hours: Monday–Friday, 8:00 a.m.–5:00 p.m. (Pacic time)

For specic instructions on how to connect to and use the services, see the

appropriate user guide for the ArcGIS application you are using.

Additional information can be found in the help le on the Data Appliance 5.1 for

ArcGIS Help Documentation DVD by opening arcgis_data_appliance.pdf.

Use Services

M. Click Save to save your changes and click the Restart button to restart

the service.

N. Repeat this process for any other map services you want to publish.

Andere Cutting Edge Datenlogger Handbücher

Cutting Edge

Cutting Edge GL2100 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung

Cutting Edge esri Data Appliance 5.1 Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken