CyberData 3COM VCX PBX Server Bedienungsanleitung
3COM VCX PBX Server
VoIP Intercom Setup Guide
CyberData Corporation • 2555 Garden Road • Monterey, CA • 93940 • T:831-373-2601 • F: 831-373-4193
www.CyberData.net
Server Setup Guide 930288A CyberData Corporation
2
1.0 Setup Diagram
Figure 1 is a setup diagram for a single Intercom configuration. In this configuration, the Intercom
acts as a standalone SIP telephony device.
Figure 1. Setup Diagram
IP Phone
IP Address:___________________ CyberData VoIP IntercomServer
IP Address:___________________
NetGear EtherFast FS108P Fast Ethernet Switch
Server Setup Guide 930288A CyberData Corporation
3
2.0 Host Environment
3.0 Test Setup Equipment
Table 1. Host Environment Details
Description
Hardware Type 3COM VCX V7000
Hardware Version
Software Type
Software Version
Table 2. Test Setup Equipment
Equipment Model Version
Grandstream BudgeTone-100
Notes:
NetGear EtherFast FS108P Fast Ethernet Switch
Notes:
VoIP Intercom 010935B 3.3.2
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Notes:
Server Setup Guide 930288A CyberData Corporation
4
4.0 Setup Procedure
4.1 VCX Configuration
Below are the steps to configure the VCX so that a CyberData Intercom is able to register with the
VCX.
To configure the VCX,
1. Navigate to the Central Management Console of the VCX and login as Admin. See Figure 2.
Figure 2. Central Management Console
Central Management Console
Server Setup Guide 930288A CyberData Corporation
5
2. Click on the Site Name.
Figure 3. Site Name
3. This takes you to the Users page by default. Go to the Phones web page to create an extension
for each CyberData Intercom.
Figure 4. Users Page
VoIP Intercom
Server Setup Guide 930288A CyberData Corporation
6
4. Select Add Phone and enter phone information. The extension and password assigned here are
later used on the SIP Setup web page (Table 3 or Step 5 of Section 4.2, "Setup CyberData Device
Parameters").
Figure 5. Add Phone
5. Return to the Users page and then select the Add User button to create a user to assign the
Intercom extensions to.
Figure 6. Users Page
“SIP Setup” web page
“SIP Setup” web page
VoI P Int er c om
VoIP Intercom.
.
Server Setup Guide 930288A CyberData Corporation
7
6. Enter information similar to the information shown in Figure 7.
Figure 7. Edit User Page
7. Click the Save button and the screen will go back to the Users web page.
8. On the Users page, look to the far right of the User created for the CyberData Intercoms, and
you will see a Phones button (see Figure 6). Use this button to assign and associate Intercom
extensions to this user.
Note There is another Phones menu on the left-hand pane. This menu is used to create
extensions or phones and not assign phones as outlined here. Creation of the extension
or phones has been outlined earlier in this procedure.
VoI P In t er c om
VoIP Intercom
Server Setup Guide 930288A CyberData Corporation
8
9. Click this button to display a list of Extensions associated with this user. Initially this is blank.
Figure 8. User—Assigned Phones Page
10. Select the Assign Phone button to list all of the available extensions. The web page shown in
Figure 9 is now displayed. You may select one or more extensions to assign to this user.
VoI P Int erc om
Server Setup Guide 930288A CyberData Corporation
9
11. To assign multiple extensions, put a check mark on each box next to the extension.
12. Click the Assign Selected button, and all of the marked selected extensions are now associated
with this user.
Figure 9. User—Unassigned Phones Page
VoIP Intercom
Server Setup Guide 930288A CyberData Corporation
10
4.2 Setup CyberData Device Parameters
To setup CyberData device parameters,
1. Log into the CyberData Configuration Home page (Figure 10) by pointing your browser to the
Intercom’s IP address.
Figure 10. CyberData Home Page
For the initial configuration of the Intercom, refer to the Operation Guide of the Intercom that
you have which can be found at the following web address:
http://www.cyberdata.net/support/download.html
Note You may also download CyberData’s VoIP Discovery Utility program which allows you
to easily find and configure the default web address of the CyberData VoIP Intercom.
CyberData’s VoIP Discovery Utility program is available at the following web address:
http://www.cyberdata.net/support/voip/discovery_utility.html
2. Type the username and password to log into the CyberData Home Page.
SIP Setup button
2
Inhaltsverzeichnis
Andere CyberData Gegensprechanlage Handbücher
CyberData
CyberData 011214 Handbuch
CyberData
CyberData 011309 Handbuch
CyberData
CyberData 11214 Bedienungsanleitung
CyberData
CyberData 011035 Handbuch
CyberData
CyberData 11186 Handbuch
CyberData
CyberData 11186 Handbuch
CyberData
CyberData 11308 Bedienungsanleitung
CyberData
CyberData 11214 Bedienungsanleitung
CyberData
CyberData 11113 Bedienungsanleitung
CyberData
CyberData 11305 Handbuch
CyberData
CyberData 11305 Bedienungsanleitung
CyberData
CyberData VoIP Intercom 010935B Handbuch
CyberData
CyberData VoIP Intercom 010935B Bedienungsanleitung
CyberData
CyberData VoIP Indoor Intercom 011030 Handbuch
CyberData
CyberData VoIP Intercom 010935F Bedienungsanleitung
CyberData
CyberData 11304 Bedienungsanleitung
CyberData
CyberData 11308 Handbuch
CyberData
CyberData 11186 Bedienungsanleitung
CyberData
CyberData 11310 Handbuch
CyberData
CyberData 011211 series Handbuch
