Cyclops Lighting PR-250T Bedienungsanleitung

USER MANUAL

PR-250T

Tunable White 250 watts Profile

Caution!.................................................................................................................. 3

Introduction ........................................................................................................... 3

Safety instructions................................................................................................. 3

Overview ................................................................................................................ 3

Installation ............................................................................................................. 5

Read ‘Safety information’ before installing the xture....................................................................... 5

Fastening the xture to a at surface ................................................................................................. 5

Mounting the xture on a truss ........................................................................................................... 5

Securing with a safety cable ............................................................................................................... 6

DMX-512 connection/connection between xtures........................................................................... 6

Power connection................................................................................................................................ 7

Operation ............................................................................................................... 7

Control Menu Map............................................................................................................................... 7

Control menu ....................................................................................................................................... 8

Main Menu ........................................................................................................................................... 9

Addressing ........................................................................................................................................... 9

Universal DMX Control ......................................................................................................................10

RDM control .......................................................................................................................................10

Rotary Knob function.........................................................................................................................10

Set dimmer curves.............................................................................................................................11

Zoom ..................................................................................................................................................12

DMX Protocol ...................................................................................................... 12

Fixture Cleaning................................................................................................... 12

Fuse Replacement .............................................................................................. 13

Troubleshooting................................................................................................... 13

The xture does not work, no light ................................................................................................... 13

Technical specications ..................................................................................... 13

Table of contents

3V1.47

Caution!

Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric

shock when touching the wires!

Avoid looking directly into the light source!

Wear protective glasses and other PPE (personal protective equipment) when working on or near

the xture.

For your own safety, please read this user manual carefully before you initial start-up.

Follow operating safety precautions and pay attention to warning signs methods and equipment

on the user manual.

Indoor use only! To prevent risk of re or shock, do not expose this product to rain or moisture. IP

20 rating.

The ambient temperature must always be between -5° C and +45° C.

Always make sure you are connecting this product to the proper voltage in accordance with the

specications in this manual or on the product’s specication label.Make sure it is grounded when

using it!

Unplug mains lead before opening the housing!

Make sure that the power cord is never crimped or damaged by sharp edges. Check the xture

and the powercord from time to time.

Make sure to replace the fuse with another of the same type and rating.

Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot

during operation. After use, wait for a cool-down period of at least 10 minutes before handling or

transporting the device.

Every person involved with the installation, operation and maintenance of this device has to

- be qualied

- follow the instructions of this manual

- consider this manual to be part of the total product

- keep this manual for the entire service life of the product

- pass this manual on to every further owner or user of the product

- download the latest version of the user manual from the Internet

Introduction

Thank you for having chosen PR-250T. You will see you acquired a powerful and versatile device.

Unpack your item. Before you initial start-up, please make sure that there is no damage caused by

transportation. Should there be any, consult your dealer and do not use the device.

Safety instructions

This device has left our premises in absolutely perfect condition. In order to maintain this condition and

to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and

warning notes written in this user manual. Always disconnect from the mains, when the device is not in

use or before cleaning it. Keep away children and amateurs from the device! There are no serviceable

parts inside the device. Maintenance and service operations are only to be carried out by authorized

dealers.

4V1.47

LCD display

button

Down

button

Enter

button

Dmx signal indicator

Power indicator

Handle

Rotary

button

Dmx outDmx inFusePower

out

Power

On/off

switch

LCD display

Yoke

Shutters

Gobo holder slot

Iris slot

Focus knob

Yoke locking knob

Zoom knob Color frame clip

Color frame

5V1.47

Overview

Installation

Read ‘Safety information’ before installing the xture.

The xture is designed for indoor use only and must be used in a dry location with adequate ventilation.

Ensure that none of the xture’s ventilation slots are blocked.

Fasten the xture to a secure structure or surface. Do not stand it on a surface or leave it where it can

be moved or fall over. If you install the xture in a location where it may cause injury or damage if it falls,

secure it as directed in this user manual using a securely anchored safety cable that will hold the xture if

the primary fastening method fails.

Fastening the xture to a at surface

The xture can be fastened to a hard, xed, flat surface that is oriented at any angle. Ensure that the

surface and all fasteners used can support at least 10 times the weight of all xtures and equipment to

be installed on it.

Fasten the xture securely. Do not stand it on a surface or leave it where it can be moved or fall over.

If you install the xture in a location where it may cause injury or damage if it falls, secure it as directed

below with a securely anchored safety cable that will hold the xture if the primary fastening method fails.

Mounting the xture on a truss

The xture can be clamped to a truss or similar rigging structure in any orientation. When installing the

xture hanging vertically down, you can use an open-type clamp such as a G-clamp. When installing in

any other orientation, you must use a half-coupler clamp that completely encircles the truss chord.

To clamp the xture to a truss:

1. Check that the rigging structure can support at least 10 times the weight of all xtures and equipment

to be installed on it.

2. Block access under the work area.

3. Fold the legs of the mounting bracket together and bolt a rigging clamp securely to the mounting

bracket. The bolt used must be M10, grade 8.8 steel minimum. It must pass through both mounting

bracket legs and be fastened with a self-locking nut.

4. Working from a stable platform, hang the fixture with its clamp on the truss and fasten the clamp

securely.

5. Secure the xture with a safety cable as directed below.

6V1.47

Securing with a safety cable

Secure the xture with a safety cable (or other secondary attachment) that is approved for the weight of

the xture so that the safety cable will hold the xture if a primary attachment fails.

Loop the safety cable through the eyebolt in the back of the xture and around a secure anchoring point.

Do not loop the safety cable around the fixture’s mounting bracket only, as this will leave the fixture

unsecured if it separates from the bracket.

DMX-512 connection/connection between xtures

Occupation of the XLR-connection:

1. Group

2. Signal (-)

3. Signal (+)

DMX OUT

1. Group

2. Signal (-)

3. Signal (+)

DMX IN

7V1.47

If you are using controllers with this occupation, you can connect the DMX-output of the controller directly

with the DMX-input of the rst xture in the DMX-chain. If you wish to connect DMX-controllers with other

XLR-outputs, you need to use adapter-cables.

Building a serial DMX-chain:

Connect the DMX-output of the rst xture in the DMX-chain with the DMX-input of the next xture.

Always connect one output with the input of the next xture until all xtures are connected.

DMX-512 connection with DMX terminator:

For installations where the DMX cable has to run a long distance or is in an electrically noisy

environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in

preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an

XLR plug with a 120 resistor connected between pins 2 and 3, which is then plugged into the output XLR

socket of the last xture in the chain.

Caution: At the last xture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω

resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the

last xture.

Power connection

Power Requirements

The PR-250T zoom luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire

contains an auto-ranging power supply.

Power linking between xtures:

The xture with powercon in and out socket. Connect the power out to the power in socket in the next

xture till all are connected.

Caution: maximum power linking - 6 units.

Connection with the mains:

Connect the device to the mains with the enclosed power supply cable.

The occupation of the connection cables as below:

Cable color Connection International

Brown Live L

Blue Neutral N

Yellow/green Earth(Ground)

Operation

The PR-250T zoom can operate in three different modes. In each mode you can run the fixture as a

stand alone xture or in a master/slave conugration. This next section will detail the differences in the

operating modes.

8V1.47

Control Menu Map

Default setting in bold.

MAIN MENU LEVEL 1 LEVEL 3 LEVEL 3 FUNCTION INSTRUCTION

DMX 001-512 DMX address setting

Mode

DMX 1/2/3CH DMX channel mode

Auto Program 001-004 Preset programs

Speed 001-009 Programs speed

Maunal Warm 000-255 Warm white dimmer 0-100%

Cold 000-255 Cold white dimmer 0-100%

Dimmer

Curve 0.3-3.0 Dimmer curves adjustment

Mode

Standard Dimmer mode, Standard

Stage Dimmer mode, Stage

TV Dimmer mode, TV

Architecture Dimmer mode, Architecture

Theatre Dimmer mode, Theatre

Studio Studio power mode, silent

Custom Fade in

(150 ms~2230 ms) Custom dimmer curve

Fade out

(150 ms~2230 ms)

Advance

Authorization On/Off

Advanced settings/calibration(Only

qualied technicians should perform

this function. Inqure your local

dealer for password.)

Signal Priority DMX Signal priority setting

Signal Hold On/Off Run if signal cut

RDM On/Off RDM function on/off

Screen Timeout 30S Display shut off time

Never

Screen Brightness 25-100% Display brightness

Dimming Freq

1.20KHz

Dimmer frequency setting

1.60KHz

2.40KHz

4.00KHz

6.00KHz

20.00KHz

Reset Yes/No System reset

Reverse Yes/No Display reverse 180 degree

9V1.47

Control menu

The information menu will appear after the xture is switched on. In this menu, the following status is

displayed:

Main Menu

Press the MENU button to enter the Main Menu interface.

DMX

Advance

Mode

Dimme r

Addressing

All xtures should be given a DMX starting address when using a DMX signal, so that the correct xture

responds to the correct control signals. This digital starting address is the channel number from which

the xture starts to listen to the digital control information sent out from the DMX controller. The allocation

of this starting address is achieved by setting the correct number on the display located on the base of

the device.

You can set the same starting address for all xtures or a group of xtures, or make different address for

each xture individually.

If you set the same address, all the units will start to listen to the same control signal from the same

channel number. In other words, changing the settings of one channel will affect all the fixtures

simultaneously.

10 V1.47

If you set a different address, each unit will start to listen to the channel number you have set, based on

the quantity of control channels of the unit. That means changing the settings of one channel will affect

only the selected xture.

In the case of the PR-250T zoom, which is 1/2/3 channels xture. If you set, for example, the address in

the 1 channel mode to channel 2, the device will use the channel 2 for control.

Note: After switching on, the device will automatically detect whether DMX 512 data is received or

not. If there is data received at the DMX input, you will see the DMX indicator light in green.

Universal DMX Control

This function allows you to use a universal DMX-512 controller to control the dimmer and strobe. A DMX

controller allows you to create unique programs tailored to your individual needs.

RDM control

The PR-250T can communicate using RDM (Remote Device Management) in accordance with ESTA’s

American National Standard E1.20-2006: Entertainment Technology RDM Remote Device Management

Over DMX512 Networks.

RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open

standard for DMX512 device conguration and status monitoring.

The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting

existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to and

receive messages from specic xtures.

With RDM function, you can set the DMX address of your fixtures remotely. This is especially useful

when the device is installed in a remote area.

Each PR-250T has a factory set RDM UID (unique identication number).

Note: Before operation, enable RDM function in Advanced settings.

Inhaltsverzeichnis

Andere Cyclops Lighting DJ-Equipment Handbücher

Cyclops Lighting

Cyclops Lighting FR-150W Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting FR-40F Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting FR-150C Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PR-300C Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PAR-350W Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PR-300W Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting FR-50T Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PR-350S Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PAR-150CZ Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PAR-150FZ Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PAR-150WZ Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting FR-300C Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting FR-40W Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PAR-100UV Bedienungsanleitung

Cyclops Lighting

Cyclops Lighting PR-40C Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung