CYCMOTOR TOPOLOGY SW102 Bedienungsanleitung
TOPOLOGY SW102
Display Guide
support@cycmotor.com
+852 3690 8938
© 2022 CYCMOTOR LTD
Product Details
01
Product Details
Product Name
Intelligent OLED display, model : SW102
Firmware: CYCMotor Ltd specic rmware
Features
• Minimalist design and process
• High brightness, high contrast 1.3-inch monochromatic OLED screen
• Excellent outdoor design with IP65 waterproof rating
Dimensions & Materials
Materials
Product shell - ABS + PC plastic
Transparent window - 2.5D Tempered glass
Dimensions
L 23mm x W 40mm x H 63mm
© 2022 CYCMOTOR LTD
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
Electrical Specications
• Power supply：DC 36V/48V/ 52V
• Rated current：12mA
• Shutdown leakage current：<1uA
• Screen specication：1.3” OLED（64*128 dots）
• Communication method：UART (default)
• Operating temperature：-20°C ~ 60°C
• Storage temperature：-30°C ~ 80°C
• Waterproof level: IP65
© 2022 CYCMOTOR LTD
Quick Start Guide
After unboxing and installing your CYC motor system, there are two main things you need to set up.
1. Change your Battery No. setting according to your rated voltage.
Within 15 seconds of turning on your display, long press the MENU button to enter the settings functions.
Press UP/ DOWN to navigate the settings page & MENU to select.
*Please note that 6s to 9s is not compatible with the CYC systems. This will be removed in future batches. Our
apologies for the confusion.
2. Change your Wheel setting according to your bike’s wheel size.
3. Now, you can set things up like your temperature and speed unit as well as your brightness level.
Otherwise, you’re good to go!
6s = 22.2V
7s = 25.9V
8s = 29.6V
9s = 33.3V
10s = 36V
11s = 40.7V
12s = 44.4V
13s = 48V
14s = 52V
Quick Start Guide
02
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
Functionalities
Power On/ O
Press and hold the POWER button for 2 second to turn the display on/ o. The display will automatically shut
down when there is no operation for a period of time.
Navigation
1. POWER
2. MENU
3. UP
4. DOWN
The MENU is used to go into your main settings page & your clear data page. It is also used to enter and
select a setting or function & nally, it’s also used to switch between the various main dashboard
information.
© 2022 CYCMOTOR LTD
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
Functionalities
02
POWER
MENU
UP
DOWN
© 2022 CYCMOTOR LTD
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
Functionalities
02
Switch Dashboard
Switch the main dashboard to display dierent information by pressing the MENU button.
Assist Level Operating
Press the UP/ DOWN button to change the assist level between level 1, 2, and 3. Note that “OFF” means no
motor asssitance will be given.
Functionalities
02
Walk Assist
Long press the DOWN button to activate walk assist. Note that it takes 3 seconds to activate & will deactivate
immediately when the button is released.
Walk assist can only be activated if you are assist level 1, 2, or 3.
Settings
Long press the MENU button within 15 seconds of switching on the display to enter the “Settings” page.
Note that once the system has been activated for longer than 15 seconds, you will need to restart the motor
system to enter the settings menu.
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
Functionalities
02
Clean Trip Data
Wait 15 seconds after starting up the motor system to be able to enter the“Clean Data”menu. Long press the
MENU button to clear the previous trip data. Please note that the trip data does not automatically clear once
you restart the motor system. This is a manual process.
Error Codes
In certain circumstances, an error code may appear on your display. Contact
techinical_support@cycmotor.com for assistance. *TBC
Error Code on SW102 Display Error Code on App
1Controller Over Voltage
Controller Under Voltage
Controller Internal Error 1
Controller Over Temperature
Motor Over Temperature
Controller Internal Error 10
Controller Internal Error 2
Controller Internal Error 3
Controller Internal Error 4
Controller Internal Error 5
Controller Internal Error 6
Controller Internal Error 7
Controller Internal Error 8
Controller Internal Error 9
Hall Sensor Error
Throttle Error
Speed Sensor Error
2
4
5
6
9
10
14
15
16
17
18
23
24
26
28
29
Installation
03
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology Intelligent Technology Co., Ltd.
(otherwise known as Topology). All the information contained in this manual is published in good faith and for general information purpose only. Contact
technical_support@cycmotor.com for further assistance.
© 2022 CYCMOTOR LTD
Installation
1. Open the display lock clip, set the display in the left handlebar (standard handlebar sizeΦ22.2). Adjust it
in place and tighten the screw accordingly.
Note: Damage caused by excessive torque is not covered by the warranty.
Certication
CE / IP65 (waterproof) / ROHS.
Be sure to contact techinical_support@cycmotor.com if further assitance is needed. Thank you!
1. Red wire: Anode (36V to 72V)
2. Black wire: GND
3. Yellow wire: TxD (display -> controller)
4. Green wire: RxD (controller -> display)
5. Blue wire: Power cord to the controller
Pin Layout
Inhaltsverzeichnis
Andere CYCMOTOR Monitor Handbücher
