Czur TouchBoard V2 Bedienungsanleitung
Touchboard V2 User manual
How to Use the TouchBoard
1
·Pair the TouchBoard with the StarryHub
* TouchBoard and the StarryHub are paired by factory default.
If you need pair them again, please do as follow steps:
Main unit power on TouchBoard power on
❶
❷
Power on StarryHub and the TouchBoard.
on
Off
TouchBoard acts as a wireless controller to the StarryHub.
You can operate StarryHub with the TouchBoard easily.
Before using the TouchBoard, please turn the power button
(on the back of the TouchBoard) to ON status.
Put the TouchBoard back to charging dock (on the top of
StarryHub) after each use.
Long press on the upper left corner for 3 seconds
until the LED indicator blinks in blue color.
on
Off
Tap on Touch/Board to switch input method (touch
panel or keyboard).
· Touch Panel / Keyboard
Tap on V- V+ to adjust volume of the StarryHub.
· Volume adjustment
Paired!
❸Put the TouchBoard back to the charging dock, wait for
10 seconds until the icons on the first row of the Touch-
Board light up. Pairing is completed.
Tap on to focus the projector lens automatically. Long
press to use manual focus.
· Auto-focus
· Switch signal source
Tap on to switch between Starry OS main system,
HDMl, and wireless screen projection signal sources.
· Home
Tap on and back to home page, long press for APP
selector.
In Touch mode , regular operations such as
“Slide”, “Click/Touch with 1 finger”, “Slide with 2
fingers” and “Zoom in & out with 2 fingers” are sup-
ported.
Slide with ONE finger or Double click with ONE finger and
slide :To move object.
Tab with two fingers Call out more options = right-click on
computer mouse.
Slide vertically with three fingers: To switch between APPs.
Slide left/right with three fingers Switch applications.
· Finger touch
Click
One finger slide Slide with two fingers Tab/Press with one finger
· Back
Tap to get back to previous page or previous operation.
In Board mode , keyboard will light up so you can use
the TouchBoard as an input method.
"Low Battery" alert appears with the upper left indicator
light keeps flashing red when Touchboard battery under
20%. Please put the TouchBoard back to the charging dock
(the 3 pins on the top of StarryHub) to recharge.
*Tab Shift + Space bar at the same time to switch key-
board input language.
*[Fn], [OPT], [CMD] can work on Windows and MacOS, but
are NOT available on StarryOS.
· Low Battery Status
· Keyboard
Two fingers open/close
Slide left/right with three fingers Slide with ONE finger or Double
click with ONE finger and slide
Tab with two fingers Slide vertically
with three fingers
2
Touchpad standby and sleep
2
• Touch pad standby: Touch mode has no operation for 1
minutes then will enters standby mode automatically.
Keyboard mode without operation for 1 minute, will enter
touch mode; Touch mode for 1 minutes without operation,
will enter standby mode.
• Standby definition: After entering the standby mode, the
power indicator lights up slightly,and the backlight lights in
the functional area and keyboard area are off.
• Touchpad enters standby wake-up mode: Use any key to
wake up the touchpad.
•Touchpad Sleep:Bluetooth connected for 24 hours without
any operation, will enter sleep mode automatically.
Bluetooth not connected for 30 minutes without any opera-
tion, will enter sleep automatically.
• Sleep definition: All indicator lights are off, and the device
enters deep sleep.
•The touchpad enters sleep mode, and the wake-up method
is:Place the touchpad in the charging area of the projector,
and the touchpad will automatically wake up, or turn off the
power switch and then turn it on again.
Inhaltsverzeichnis
Andere Czur Controller Handbücher
