D-Link DCS-8330LH Bedienungsanleitung
Smart Full HD Wi-Fi Camera
Quick Start Guide
DCS-8330LH
快速入門指南
with built-in smart home hub
DCS-8330LH
2
ENGLISH
Quick Installation Guide
Power Adapter
DCS-8330LH
Smart Full HD Wi-Fi Camera
with built-in smart home hub
2 x Screws
2 x Wall Anchors
3
DCS-8330LH
ENGLISH
1Download the App
Search for mydlink and download the app.
Note: This product is incompatible with
other mydlink apps such as ‘mydlink Home,’
‘mydlink Lite,’etc.
mydlink
DCS-8330LH
4
ENGLISH
2Log In
Sign In or Sign Up for a mydlink account.
mydlink Lite users may sign in with the
same account.
5
DCS-8330LH
ENGLISH
3Add The Device
1
2
3
Tap the menu button
Tap Add a Device
Scan the Setup Code on the bottom of the
device, then follow the app instructions.
DCS-8330LH
6
ENGLISH
Use a pencil to make two marks
33 mm apart. Use a 6mm drill bit
to drill two 3mm deep holes over
the pencil marks. Hammer in the
plastic wall anchors to support the
screws.
Twist the screws into the anchors,
leaving the tops of the screws
exposed from the surface. Do not
over tighten the screws.
Locate the two mounting holes on
the bottom, noting that they are
33 mm apart.
Mounting
2/
3/
1
/
33 mm
2.6~3.0mm
33 mm
33 mm
2.6~3.0mm
33 mm
33 mm
2.6~3.0mm
33 mm
7
DCS-8330LH
ENGLISH
Note: The ideal mounting height is between 1.5-3 meters (5-10 feet)
from the floor.
Align the mounting holes on the
bottom of the camera with the
screws. Slide the camera down to
lock it into place.
Twist the camera to your desired
position. Go to the settings in the
app and enable Invert Image if the
image is up-side-down.
Mounting
4
/
5
/
33 mm
2.6~3.0mm
33 mm
33 mm
2.6~3.0mm
33 mm
DCS-8330LH
8
ENGLISH
Device Information
i
Booting up
Connected to Wi-Fi and mydlink
Ready for setup
Firmware being upgraded. Do not power it off.
System Status LED
Pairing with a mydlnk Smart DIY device
Status LED
Reset Button
9
DCS-8330LH
ENGLISH
What do I do if my device is not working properly?
Reset the device and reinstall it. To reset your device, use a paper
clip to press and hold the recessed Reset button until the LED turns
solid red.
During installation, ensure that:
• your router is connected to the Internet and has Wi-Fi enabled
• your mobile device is connected to your router Wi-Fi and has
Bluetooth enabled
• your mydlink device is in range of your Wi-Fi network
Why is there a white haze when viewing in night vision mode?
When viewing in night vision mode, the IR lights on your camera
may be reflecting off a nearby surface. Try repositioning your camera
to avoid glare from IR LEDs.
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google
Assistant. For setup instructions on these services, visit the following
websites:
Alexa:
https://www.dlink.com/en/alexa
The Google Assistant:
https://www.dlink.com/en/google-assistant
FAQ
?
DCS-8330LH
10
ENGLISH
Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file system
(FAT32) before it can be used with this product. This can be done in
the mydlink app by selecting the Format function in the storage
menu under the Device settings.
FAQ
?
Andere Handbücher für DCS-8330LH
1
Inhaltsverzeichnis
Andere D-Link Camcorder Handbücher
D-Link
D-Link DCS-8325LH Bedienungsanleitung
D-Link
D-Link DCS-2132L-ES Bedienungsanleitung
D-Link
D-Link mydlink DNR-202L Bedienungsanleitung
D-Link
D-Link DSB-C300 Betriebsanleitung
D-Link
D-Link DCS-5000L Bedienungsanleitung
D-Link
D-Link DSB-C320 Bedienungsanleitung
D-Link
D-Link mydlink DCS-8010LH Bedienungsanleitung
D-Link
D-Link DSC-100 Bedienungsanleitung
Beliebte Camcorder Handbücher anderer Marken
Panasonic
Panasonic AG-HMC152EN Bedienungsanleitung
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung
MYDLINK
MYDLINK DCS-6100LH Bedienungsanleitung
Sony
Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung
SECURECOM
SECURECOM V-5014B Bedienungsanleitung
Panasonic
Panasonic HDC-SD100 Bedienungsanleitung
